Polymeric 3D printed structures for soft-tissue engineering

An integrated theoretical-experimental approach to accelerate translational tissue engineering

(2017) Rachel H. Coy et al.   Journal of Tissue Engineering and Regenerative Medicine

Three-Dimension-Printed Porous Poly(Propylene Fumarate) Scaffolds with Delayed rhBMP-2 Release for Anterior Cruciate Ligament Graft Fixation

(2017) Joshua Alan Parry et al.   TISSUE ENGINEERING PART A

In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications

(2017) Virginie Keriquel et al.   Scientific Reports

Biomimetic Porous PLGA Scaffolds Incorporating Decellularized Extracellular Matrix for Kidney Tissue Regeneration

(2016) Eugene Lih et al.   ACS Applied Materials & Interfaces

Poly(lactic acid) for delivery of bioactive macromolecules

(2016) Roshan James et al.   ADVANCED DRUG DELIVERY REVIEWS

Nanoreinforced Hydrogels for Tissue Engineering: Biomaterials that are Compatible with Load-Bearing and Electroactive Tissues

(2016) Mehdi Mehrali et al.   ADVANCED MATERIALS

Self-Healing Hydrogels

(2016) Danielle Lynne Taylor et al.   ADVANCED MATERIALS

3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery

(2016) Ryan Trombetta et al.   ANNALS OF BIOMEDICAL ENGINEERING

Water-based polyurethane 3D printed scaffolds with controlled release function for customized cartilage tissue engineering

(2016) Kun-Che Hung et al.   BIOMATERIALS

A comprehensive review on droplet-based bioprinting: Past, present and future

(2016) Hemanth Gudapati et al.   BIOMATERIALS

Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip

(2016) Yu Shrike Zhang et al.   BIOMATERIALS

3D bioprinting for engineering complex tissues

(2016) Christian Mandrycky et al.   BIOTECHNOLOGY ADVANCES

Modification of gellan gum with nanocrystalline hydroxyapatite facilitates cell expansion and spontaneous osteogenesis

(2016) Parastoo Jamshidi et al.   BIOTECHNOLOGY AND BIOENGINEERING

3D printing with polymers: Challenges among expanding options and opportunities

(2016) Jeffrey W. Stansbury et al.   DENTAL MATERIALS

Human hepatocytes loaded in 3D bioprinting generate mini-liver

(2016) Cheng Zhong et al.   Hepatobiliary & Pancreatic Diseases International

High Speed Photography of Laser Induced Forward Transfer (LIFT) of Single and Double-layered Transfer Layers for Single Cell Transfer

(2016) D. Riester   Journal of Laser Micro Nanoengineering

One-step fabrication of an organ-on-a-chip with spatial heterogeneity using a 3D bioprinting technology

(2016) Hyungseok Lee et al.   LAB ON A CHIP

Repeatability of linear and radial dimension of ABS replicas fabricated by fused deposition modelling and chemical vapor smoothing process: A case study

(2016) Jaspreet Singh et al.   MEASUREMENT

Three-dimensional manipulation of single cells using surface acoustic waves

(2016) Feng Guo et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Three-dimensional bioprinting of thick vascularized tissues

(2016) David B. Kolesky et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

A Review of Three-Dimensional Printing in Tissue Engineering

(2016) Nick A. Sears et al.   TISSUE ENGINEERING PART B-REVIEWS

Skin Bioprinting: Impending Reality or Fantasy?

(2016) Wei Long Ng et al.   TRENDS IN BIOTECHNOLOGY

Dual-Stage Crosslinking of a Gel-Phase Bioink Improves Cell Viability and Homogeneity for 3D Bioprinting

(2016) Karen Dubbin et al.   Advanced Healthcare Materials

Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink

(2016) Aleksander Skardal et al.   Jove-Journal of Visualized Experiments

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

(2016) Lokesh Karthik Narayanan et al.   ACS Biomaterials-Science & Engineering

Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting

(2016) Rod R. Jose et al.   ACS Biomaterials-Science & Engineering

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

(2016) Lokesh Karthik Narayanan et al.   ACS Biomaterials Science & Engineering

Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting

(2016) Rod R. Jose et al.   ACS Biomaterials Science & Engineering

Structure, Properties, and In Vitro Behavior of Heat-Treated Calcium Sulfate Scaffolds Fabricated by 3D Printing

(2016) Mitra Asadi-Eydivand et al.   PLoS One

Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone

(2016) Ian S. Kinstlinger et al.   PLoS One

Research on the printability of hydrogels in 3D bioprinting

(2016) Yong He et al.   Scientific Reports

3D-engineering of Cellularized Conduits for Peripheral Nerve Regeneration

(2016) Yu Hu et al.   Scientific Reports

3D Printed Anatomical Nerve Regeneration Pathways

(2015) Blake N. Johnson et al.   ADVANCED FUNCTIONAL MATERIALS

Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

(2015) Cristina Colosi et al.   ADVANCED MATERIALS

Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels

(2015) Christopher B. Highley et al.   ADVANCED MATERIALS

3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures

(2015) Sungmin Hong et al.   ADVANCED MATERIALS

Analysis of a New All-Inside Versus Inside-Out Technique for Repairing Radial Meniscal Tears

(2015) Brandon S. Beamer et al.   ARTHROSCOPY-THE JOURNAL OF ARTHROSCOPIC AND RELATED SURGERY

Biomechanical Evaluation of an All-Inside Suture-Based Device for Repairing Longitudinal Meniscal Tears

(2015) Aidin Masoudi et al.   ARTHROSCOPY-THE JOURNAL OF ARTHROSCOPIC AND RELATED SURGERY

3D printing of layered brain-like structures using peptide modified gellan gum substrates

(2015) Rodrigo Lozano et al.   BIOMATERIALS

3-dimensional bioprinting makes its mark: New tissue and organ printing methods are yielding critical new tools for the laboratory and clinic

(2015) Bryn Nelson   CANCER CYTOPATHOLOGY

Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions

(2015) I. Sabree et al.   CERAMICS INTERNATIONAL

3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration

(2015) Derek Rosenzweig et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering

(2015) Philip P. Rodenbough et al.   JOURNAL OF CHEMICAL EDUCATION

A Novel Low-Cost Stereolithography Process Based on Vector Scanning and Mask Projection for High-Accuracy, High-Speed, High-Throughput, and Large-Area Fabrication

(2015) Chi Zhou et al.   JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING

A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties

(2015) E.O. Olakanmi et al.   PROGRESS IN MATERIALS SCIENCE

Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education

(2015) Jean-Christophe Bernhard et al.   WORLD JOURNAL OF UROLOGY

Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity

(2015) Andreas Blaeser et al.   Advanced Healthcare Materials

Recent advances in 3D printing of biomaterials

(2015) Helena N Chia et al.   Journal of Biological Engineering

Engineering an in vitro air-blood barrier by 3D bioprinting

(2015) Lenke Horváth et al.   Scientific Reports

3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair

(2014) Ning Xu et al.   ACS Applied Materials & Interfaces

3D Biofabrication Strategies for Tissue Engineering and Regenerative Medicine

(2014) Piyush Bajaj et al.   Annual Review of Biomedical Engineering

Development of a Ku-Band Corrugated Conical Horn Using 3-D Print Technology

(2014) Jia-Chi Samuel Chieh et al.   IEEE Antennas and Wireless Propagation Letters

Influence of Chondroitin Sulfate and Hyaluronic Acid Presence in Nanofibers and Its Alignment on the Bone Marrow Stromal Cells: Cartilage Regeneration

(2014) Paul Lee et al.   Journal of Biomedical Nanotechnology

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Experimental investigation of FDM process for improvement of mechanical properties and production cost

(2014) Ismail Durgun et al.   RAPID PROTOTYPING JOURNAL

3D printing of composite tissue with complex shape applied to ear regeneration

(2014) Jung-Seob Lee et al.   Biofabrication

Three-dimensional print of a liver for preoperative planning in living donor liver transplantation

(2013) Nizar N. Zein et al.   LIVER TRANSPLANTATION

Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting

(2013) Ahmed Hussein et al.   MATERIALS & DESIGN

Role of cytokines in intervertebral disc degeneration: pain and disc content

(2013) Makarand V. Risbud et al.   Nature Reviews Rheumatology

Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice

(2013) Stefanie Michael et al.   PLoS One

Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering

(2013) Cijun Shuai et al.   Biofabrication

Adding Value in Additive Manufacturing : Researchers in the United Kingdom and Europe Look to 3D Printing for Customization

(2013) Jim Banks   IEEE Pulse

Printing organs on demand

(2013) Stephanie Bartlett   Lancet Respiratory Medicine

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

(2012) Bin Duan et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling

(2012) Jyrki Korpela et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Electrospun fibre diameter, not alignment, affects mesenchymal stem cell differentiation into the tendon/ligament lineage

(2012) Robyn D. Cardwell et al.   Journal of Tissue Engineering and Regenerative Medicine

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

(2012) Simon J. Leigh et al.   PLoS One

Bioprinting for stem cell research

(2012) Savas Tasoglu et al.   TRENDS IN BIOTECHNOLOGY

Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds

(2012) L A Hockaday et al.   Biofabrication

FDA approved guidance conduits and wraps for peripheral nerve injury: A review of materials and efficacy

(2011) S. Kehoe et al.   INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED

Modelling micro geometrical profiles in fused deposition process

(2011) A. Boschetto et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

3D printing in X-ray and gamma-ray imaging: A novel method for fabricating high-density imaging apertures

(2011) Brian W. Miller et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT

Biofabrication of a three-dimensional liver micro-organ as anin vitrodrug metabolism model

(2010) Robert Chang et al.   Biofabrication

3D printing based on imaging data: review of medical applications

(2010) F. Rengier et al.   International Journal of Computer Assisted Radiology and Surgery

Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering

(2009) W.Y. Yeong et al.   Acta Biomaterialia

Microenvironmental regulation of the sinusoidal endothelial cell phenotype in vitro

(2009) Sandra March et al.   HEPATOLOGY

Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology

(2009) Adir Cohen et al.   ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTICS

Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique

(2008) Garrett E. Ryan et al.   BIOMATERIALS

On the mechanisms of biocompatibility

(2008) David F. Williams   BIOMATERIALS

Scaffolding in tissue engineering: general approaches and tissue-specific considerations

(2008) B. P. Chan et al.   EUROPEAN SPINE JOURNAL

Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model

(2008) Robert Chang et al.   TISSUE ENGINEERING PART C-METHODS

Rapid Prototyping of a Double-Layer Polyurethane–Collagen Conduit for Peripheral Nerve Regeneration

(2008) Tongkui Cui et al.   TISSUE ENGINEERING PART C-METHODS

Organ printing: promises and challenges

(2007) Vladimir Mironov et al.   Regenerative Medicine