- Home
- Publications
- Publication Search
- Publication Details
Title
Sustainable machining of titanium alloys: A critical review
Authors
Keywords
-
Journal
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
Volume 231, Issue 14, Pages 2543-2560
Publisher
SAGE Publications
Online
2016-03-01
DOI
10.1177/0954405416634278
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Optimization of machining parameters during micro-milling of Ti6Al4V titanium alloy and Inconel 718 materials using Taguchi method
- (2016) Emel Kuram et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Laser-assisted milling of Ti-6Al-4V with the consideration of surface integrity
- (2015) G. K. Hedberg et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Design-of-experiments application in machining titanium alloys for aerospace structural components
- (2015) Navneet Khanna et al. MEASUREMENT
- Experimental evaluation of polycrystalline diamond (PCD) tool geometries at high feed rate in milling of titanium alloy TC11
- (2014) Wei Ji et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power
- (2014) R. A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- End milling of stainless steel and titanium alloy in an oil mist environment
- (2014) Masato Okada et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining
- (2014) Yusuf Kaynak et al. MACHINING SCIENCE AND TECHNOLOGY
- Cutting force, tool life and surface integrity in milling of titanium alloy Ti-6Al-4V with coated carbide tools
- (2014) Wilma Polini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Experimental investigation of end milling of titanium alloys with polycrystalline diamond tools
- (2014) Wencheng Pan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
- (2013) G. Rotella et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Energy efficiency techniques in machining process: a review
- (2013) Zhang Yingjie INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Problems and solutions in machining of titanium alloys
- (2013) A. Pramanik INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review of Engineering Research in Sustainable Manufacturing
- (2013) Karl R. Haapala et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- On the effects of cutting speed and cooling methodologies in grooving operation of various tempers of β-titanium alloy
- (2013) Christian Machai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Cutting forces, friction coefficient and surface roughness in machining Ti-5Al-4V-0.6Mo-0.4Fe using carbide tool K313 under low pressure liquid nitrogen
- (2013) Tze Chuen Yap et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Comparison of Ti6Al4V machining forces and tool life for cryogenic versus conventional cooling
- (2013) Matteo Strano et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Interrupted machining analysis for Ti6Al4V and Ti5553 titanium alloys using physical vapor deposition (PVD)–coated carbide inserts
- (2013) Navneet Khanna et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Enhanced ultrasonically assisted turning of a β-titanium alloy
- (2013) Agostino Maurotto et al. ULTRASONICS
- Towards energy and resource efficient manufacturing: A processes and systems approach
- (2012) Joost R. Duflou et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On high-speed turning of a third-generation gamma titanium aluminide
- (2012) Fritz Klocke et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining
- (2012) R.A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy
- (2012) R.A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
- (2012) Thanongsak Thepsonthi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Optimization of Machining Parameters in Turning of Titanium (Grade-5) Alloy Using Response Surface Methodology
- (2012) S. R. Chauhan et al. MATERIALS AND MANUFACTURING PROCESSES
- Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)
- (2012) S. Ramesh et al. MEASUREMENT
- The response of the high strength Ti–10V–2Fe–3Al beta titanium alloy to laser assisted cutting
- (2012) R.A. Rahman Rashid et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An experimental investigation on effects of minimum quantity lubrication oil supply rate in high-speed end milling of Ti–6Al–4V
- (2012) Xiao Jiang Cai et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy
- (2012) Chandra Nath et al. Journal of Manufacturing Processes
- Wear mechanisms analysis for turning Ti-6Al-4V—towards the development of suitable tool coatings
- (2011) Syed H. Imran Jaffery et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
- (2011) M.J. Bermingham et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy
- (2011) S Sun et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil
- (2011) E A Rahim et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Investigation of cutting force and temperature of end-milling Ti–6Al–4V with different minimum quantity lubrication (MQL) parameters
- (2011) Z Q Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Influence of cutting edge radius on cutting forces in machining titanium
- (2010) C.-F. Wyen et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts
- (2010) M. Dhananchezian et al. CRYOGENICS
- Machining Ti–6Al–4V alloy with cryogenic compressed air cooling
- (2010) S. Sun et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Energy consumption reduction technology in manufacturing — A selective review of policies, standards, and research
- (2010) Cheol-Woo Park et al. International Journal of Precision Engineering and Manufacturing
- Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy
- (2010) S.M. Yuan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Analysis of ultrasonic-assisted drilling of Ti6Al4V
- (2009) J. Pujana et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining
- (2009) Chinmaya R. Dandekar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Transitioning to sustainable production – Part I: application on machining technologies
- (2009) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Use of nitrogen gas in high-speed milling of Ti-6Al-4V
- (2009) Ying-lin KE et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Parametric Investigation of Laser-Assisted Machining of Commercially Pure Titanium
- (2008) S. Sun et al. ADVANCED ENGINEERING MATERIALS
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of cryogenic cooling in machining processes
- (2008) Yakup Yildiz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW
- (2008) P. F. Zhang et al. MACHINING SCIENCE AND TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started