标题
Sustainable machining of titanium alloys: A critical review
作者
关键词
-
出版物
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
Volume 231, Issue 14, Pages 2543-2560
出版商
SAGE Publications
发表日期
2016-03-01
DOI
10.1177/0954405416634278
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Optimization of machining parameters during micro-milling of Ti6Al4V titanium alloy and Inconel 718 materials using Taguchi method
- (2016) Emel Kuram et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Laser-assisted milling of Ti-6Al-4V with the consideration of surface integrity
- (2015) G. K. Hedberg et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Design-of-experiments application in machining titanium alloys for aerospace structural components
- (2015) Navneet Khanna et al. MEASUREMENT
- Experimental evaluation of polycrystalline diamond (PCD) tool geometries at high feed rate in milling of titanium alloy TC11
- (2014) Wei Ji et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power
- (2014) R. A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- End milling of stainless steel and titanium alloy in an oil mist environment
- (2014) Masato Okada et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining
- (2014) Yusuf Kaynak et al. MACHINING SCIENCE AND TECHNOLOGY
- Cutting force, tool life and surface integrity in milling of titanium alloy Ti-6Al-4V with coated carbide tools
- (2014) Wilma Polini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Experimental investigation of end milling of titanium alloys with polycrystalline diamond tools
- (2014) Wencheng Pan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
- (2013) G. Rotella et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Energy efficiency techniques in machining process: a review
- (2013) Zhang Yingjie INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Problems and solutions in machining of titanium alloys
- (2013) A. Pramanik INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review of Engineering Research in Sustainable Manufacturing
- (2013) Karl R. Haapala et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- On the effects of cutting speed and cooling methodologies in grooving operation of various tempers of β-titanium alloy
- (2013) Christian Machai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Cutting forces, friction coefficient and surface roughness in machining Ti-5Al-4V-0.6Mo-0.4Fe using carbide tool K313 under low pressure liquid nitrogen
- (2013) Tze Chuen Yap et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Comparison of Ti6Al4V machining forces and tool life for cryogenic versus conventional cooling
- (2013) Matteo Strano et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Interrupted machining analysis for Ti6Al4V and Ti5553 titanium alloys using physical vapor deposition (PVD)–coated carbide inserts
- (2013) Navneet Khanna et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Enhanced ultrasonically assisted turning of a β-titanium alloy
- (2013) Agostino Maurotto et al. ULTRASONICS
- Towards energy and resource efficient manufacturing: A processes and systems approach
- (2012) Joost R. Duflou et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On high-speed turning of a third-generation gamma titanium aluminide
- (2012) Fritz Klocke et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining
- (2012) R.A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy
- (2012) R.A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
- (2012) Thanongsak Thepsonthi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Optimization of Machining Parameters in Turning of Titanium (Grade-5) Alloy Using Response Surface Methodology
- (2012) S. R. Chauhan et al. MATERIALS AND MANUFACTURING PROCESSES
- Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)
- (2012) S. Ramesh et al. MEASUREMENT
- The response of the high strength Ti–10V–2Fe–3Al beta titanium alloy to laser assisted cutting
- (2012) R.A. Rahman Rashid et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An experimental investigation on effects of minimum quantity lubrication oil supply rate in high-speed end milling of Ti–6Al–4V
- (2012) Xiao Jiang Cai et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy
- (2012) Chandra Nath et al. Journal of Manufacturing Processes
- Wear mechanisms analysis for turning Ti-6Al-4V—towards the development of suitable tool coatings
- (2011) Syed H. Imran Jaffery et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
- (2011) M.J. Bermingham et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy
- (2011) S Sun et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil
- (2011) E A Rahim et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Investigation of cutting force and temperature of end-milling Ti–6Al–4V with different minimum quantity lubrication (MQL) parameters
- (2011) Z Q Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Influence of cutting edge radius on cutting forces in machining titanium
- (2010) C.-F. Wyen et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts
- (2010) M. Dhananchezian et al. CRYOGENICS
- Machining Ti–6Al–4V alloy with cryogenic compressed air cooling
- (2010) S. Sun et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Energy consumption reduction technology in manufacturing — A selective review of policies, standards, and research
- (2010) Cheol-Woo Park et al. International Journal of Precision Engineering and Manufacturing
- Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy
- (2010) S.M. Yuan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Analysis of ultrasonic-assisted drilling of Ti6Al4V
- (2009) J. Pujana et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining
- (2009) Chinmaya R. Dandekar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Transitioning to sustainable production – Part I: application on machining technologies
- (2009) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Use of nitrogen gas in high-speed milling of Ti-6Al-4V
- (2009) Ying-lin KE et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Parametric Investigation of Laser-Assisted Machining of Commercially Pure Titanium
- (2008) S. Sun et al. ADVANCED ENGINEERING MATERIALS
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of cryogenic cooling in machining processes
- (2008) Yakup Yildiz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW
- (2008) P. F. Zhang et al. MACHINING SCIENCE AND TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now