Methods for Improving the Lifetime Performance of Organic Photovoltaics with Low-Costing Encapsulation

Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes

(2015) Jens Adams et al.   Energy & Environmental Science

Outdoor Operational Stability of Indium-Free Flexible Polymer Solar Modules Over 1 Year Studied in India, Holland, and Denmark

(2014) Dechan Angmo et al.   ADVANCED ENGINEERING MATERIALS

Electron Barrier Formation at the Organic-Back Contact Interface is the First Step in Thermal Degradation of Polymer Solar Cells

(2014) I. T. Sachs-Quintana et al.   ADVANCED FUNCTIONAL MATERIALS

Evaporation-free inverted organic photovoltaics using a mixture of silver nanoparticle ink formulations for solution-processed top electrodes

(2014) Efthymios Georgiou et al.   APPLIED PHYSICS LETTERS

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

(2014) Thomas R. Andersen et al.   Energy & Environmental Science

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

(2014) Florian Machui et al.   Energy & Environmental Science

Investigating electrodes degradation in organic photovoltaics through reverse engineering under accelerated humidity lifetime conditions

(2014) Vasileios M. Drakonakis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions

(2014) Subarna Babu Sapkota et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Carbon: The Ultimate Electrode Choice for Widely Distributed Polymer Solar Cells

(2014) Gisele A. dos Reis Benatto et al.   Advanced Energy Materials

Comparison of UV-Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll-to-Roll Encapsulation Methods for Polymer Solar Cells

(2013) Markus Hösel et al.   ADVANCED ENGINEERING MATERIALS

25th Anniversary Article: Rise to Power - OPV-Based Solar Parks

(2013) Frederik C. Krebs et al.   ADVANCED MATERIALS

Synergistic effects of buffer layer processing additives for enhanced hole carrier selectivity in inverted Organic Photovoltaics

(2013) Achilleas Savva et al.   ORGANIC ELECTRONICS

Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules

(2013) Dechan Angmo et al.   ORGANIC ELECTRONICS

It is all in the Pattern-High-Efficiency Power Extraction from Polymer Solar Cells through High-Voltage Serial Connection

(2013) Peter Sommer-Larsen et al.   Energy Technology

Freely available OPV-The fast way to progress

(2013) Frederik C. Krebs et al.   Energy Technology

Surface-Initiated Poly(3-methylthiophene) as a Hole-Transport Layer for Polymer Solar Cells with High Performance

(2012) Liqiang Yang et al.   ACS Applied Materials & Interfaces

The Effect of Ageing on Exciton Dynamics, Charge Separation, and Recombination in P3HT/PCBM Photovoltaic Blends

(2012) Felix Deschler et al.   ADVANCED FUNCTIONAL MATERIALS

Solution Processed MoO3 Interfacial Layer for Organic Photovoltaics Prepared by a Facile Synthesis Method

(2012) Seiichiro Murase et al.   ADVANCED MATERIALS

Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications

(2012) Jens Meyer et al.   ADVANCED MATERIALS

Impact of unbalanced charge transport on the efficiency of normal and inverted solar cells

(2012) J. D. Kotlarski et al.   APPLIED PHYSICS LETTERS

Cooperative Assembly of Hydrogen-Bonded Diblock Copolythiophene/Fullerene Blends for Photovoltaic Devices with Well-Defined Morphologies and Enhanced Stability

(2012) Ying Lin et al.   CHEMISTRY OF MATERIALS

All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum

(2012) Thue T. Larsen-Olsen et al.   Energy & Environmental Science

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

(2012) Roland Rösch et al.   Energy & Environmental Science

Photon recycling across a ultraviolet-blocking layer by luminescence in polymer solar cells

(2012) Sebastian Engmann et al.   JOURNAL OF APPLIED PHYSICS

Photochemical stability of conjugated polymers, electron acceptors and blends for polymer solar cells resolved in terms of film thickness and absorbance

(2012) Thomas Tromholt et al.   JOURNAL OF MATERIALS CHEMISTRY

Stable organic photovoltaics using Ag thin film anodes

(2012) Soniya D. Yambem et al.   JOURNAL OF MATERIALS CHEMISTRY

Comparative studies of photochemical cross-linking methods for stabilizing the bulk hetero-junction morphology in polymer solar cells

(2012) Jon Eggert Carlé et al.   JOURNAL OF MATERIALS CHEMISTRY

Metal oxides for interface engineering in polymer solar cells

(2012) Song Chen et al.   JOURNAL OF MATERIALS CHEMISTRY

Effect of hole transporting layers on the performance of PCPDTBT : PCBM organic solar cells

(2012) J Kettle et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes

(2012) Jong-Su Yu et al.   Nanoscale

Solution processed WO3 layer for the replacement of PEDOT:PSS layer in organic photovoltaic cells

(2012) Hana Choi et al.   ORGANIC ELECTRONICS

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices – the ISOS-3 inter-laboratory collaboration

(2012) Birgitta Andreasen et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses – the ISOS-3 inter-laboratory collaboration

(2012) Gerardo Teran-Escobar et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

The use of polyurethane as encapsulating method for polymer solar cells—An inter laboratory study on outdoor stability in 8 countries

(2012) Roar R. Søndergaard et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Degradation mechanisms in organic solar cells: Localized moisture encroachment and cathode reaction

(2012) Xizu Wang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Ultrathin and lightweight organic solar cells with high flexibility

(2012) Martin Kaltenbrunner et al.   Nature Communications

Concentrated Light for Accelerated Photo Degradation of Polymer Materials

(2012) Morten V. Madsen et al.   Advanced Energy Materials

The Role of Electron Affinity in Determining Whether Fullerenes Catalyze or Inhibit Photooxidation of Polymers for Solar Cells

(2012) Eric T. Hoke et al.   Advanced Energy Materials

Change in Electronic States in the Accumulation Layer at Interfaces in a Poly(3-hexylthiophene) Field-Effect Transistor and the Impact of Encapsulation

(2011) Byoungnam Park et al.   ACS Applied Materials & Interfaces

Chemically Treating Poly(3-hexylthiophene) Defects to Improve Bulk Heterojunction Photovoltaics

(2011) Ziqi Liang et al.   ACS Applied Materials & Interfaces

Near-Infrared Azadipyrromethenes as Electron Donor for Efficient Planar Heterojunction Organic Solar Cells

(2011) Sibel Y. Leblebici et al.   ACS Applied Materials & Interfaces

Oligoselenophene Derivatives Functionalized with a Diketopyrrolopyrrole Core for Molecular Bulk Heterojunction Solar Cells

(2011) Katherine A. Mazzio et al.   ACS Applied Materials & Interfaces

Solution-Processed MoO3 Thin Films As a Hole-Injection Layer for Organic Solar Cells

(2011) Claudio Girotto et al.   ACS Applied Materials & Interfaces

Bulk Heterojunction Organic Photovoltaics Based on Carboxylated Polythiophenes and PCBM on Glass and Plastic Substrates

(2011) Brian J. Worfolk et al.   ADVANCED FUNCTIONAL MATERIALS

Degradation Effects Related to the Hole Transport Layer in Organic Solar Cells

(2011) Bernhard Ecker et al.   ADVANCED FUNCTIONAL MATERIALS

Efficient, Air-Stable Bulk Heterojunction Polymer Solar Cells Using MoOx as the Anode Interfacial Layer

(2011) Yanming Sun et al.   ADVANCED MATERIALS

Stability of Polymer Solar Cells

(2011) Mikkel Jørgensen et al.   ADVANCED MATERIALS

Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode

(2011) Mingdong Wang et al.   APPLIED PHYSICS LETTERS

The OE-A OPV demonstrator anno domini 2011

(2011) Frederik C. Krebs et al.   Energy & Environmental Science

Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment

(2011) Brian Azzopardi et al.   Energy & Environmental Science

Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb

(2011) Matthieu Manceau et al.   JOURNAL OF MATERIALS CHEMISTRY

Insights into the stability and thermal degradation of P3HT:C60 blended films for solar cell applications

(2011) David E. Motaung et al.   JOURNAL OF MATERIALS SCIENCE

Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells

(2011) Eszter Voroshazi et al.   ORGANIC ELECTRONICS

Degradation mechanisms in organic photovoltaic devices

(2011) Nadia Grossiord et al.   ORGANIC ELECTRONICS

Photochemical stability and photovoltaic performance of low-band gap polymers based on dithiophene with different bridging atoms

(2011) Martin Helgesen et al.   Polymer Chemistry

Influence of the microstructure on the photooxidative degradation of poly(3-hexylthiophene)

(2011) Aurélie Dupuis et al.   POLYMER DEGRADATION AND STABILITY

UV light protection through TiO2 blocking layers for inverted organic solar cells

(2011) Haiyan Sun et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Definition of encapsulation barrier requirements: A method applied to organic solar cells

(2011) S. Cros et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Fused thiophene/quinoxaline low band gap polymers for photovoltaic's with increased photochemical stability

(2011) Jon E. Carlé et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Enhanced performance and stability in polymer photovoltaic cells using lithium benzoate as cathode interfacial layer

(2011) Yaling Wang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Degradation mechanism of organic solar cells with aluminum cathode

(2011) Mingdong Wang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Consensus stability testing protocols for organic photovoltaic materials and devices

(2011) Matthew O. Reese et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics

(2011) Matthew T. Lloyd et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Recent development of the inverted configuration organic solar cells

(2011) Fujun Zhang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

The effect of barrier performance on the lifetime of small-molecule organic solar cells

(2011) Martin Hermenau et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules

(2011) David M. Tanenbaum et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells

(2011) Stephanie R. Dupont et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

High Efficiency Polymer Solar Cells with Long Operating Lifetimes

(2011) Craig H. Peters et al.   Advanced Energy Materials

Solution Processed Vanadium Pentoxide as Charge Extraction Layer for Organic Solar Cells

(2011) Kirill Zilberberg et al.   Advanced Energy Materials

The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices

(2011) David M. Tanenbaum et al.   RSC Advances

Using Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells

(2010) Frederik C. Krebs et al.   ACS Applied Materials & Interfaces

Ultra Fast and Parsimonious Materials Screening for Polymer Solar Cells Using Differentially Pumped Slot-Die Coating

(2010) Jan Alstrup et al.   ACS Applied Materials & Interfaces

Performance and Stability Improvement of P3HT:PCBM-Based Solar Cells by Thermally Evaporated Chromium Oxide (CrOx) Interfacial Layer

(2010) Mingdong Wang et al.   ACS Applied Materials & Interfaces

Quinacridone-Based Molecular Donors for Solution Processed Bulk-Heterojunction Organic Solar Cells

(2010) John Jun-An Chen et al.   ACS Applied Materials & Interfaces

Axial Thiophene−Boron(subphthalocyanine) Dyads and Their Application in Organic Photovoltaics

(2010) Clayton E. Mauldin et al.   ACS Applied Materials & Interfaces

Photoinduced Degradation of Polymer and Polymer-Fullerene Active Layers: Experiment and Theory

(2010) Matthew O. Reese et al.   ADVANCED FUNCTIONAL MATERIALS

For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%

(2010) Yongye Liang et al.   ADVANCED MATERIALS

High-efficiency inverted bulk heterojunction polymer solar cells with UV ozone-treated ultrathin aluminum interlayer

(2010) Hongmei Zhang et al.   APPLIED PHYSICS LETTERS

Reduced initial degradation of bulk heterojunction organic solar cells by incorporation of stacked fullerene and lithium fluoride interlayers

(2010) Kenji Kawano et al.   APPLIED PHYSICS LETTERS

Toward Stabilization of Domains in Polymer Bulk Heterojunction Films

(2010) Bobak Gholamkhass et al.   CHEMISTRY OF MATERIALS

Photodegradation of P3HT−A Systematic Study of Environmental Factors

(2010) Holger Hintz et al.   CHEMISTRY OF MATERIALS

Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative

(2010) Frederik C. Krebs et al.   Energy & Environmental Science

Effect of illumination and annealing on electrical properties of indium tin oxide/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)/poly(3-hexylthiophene)/Al device

(2010) Yeon-Il Lee et al.   JOURNAL OF APPLIED PHYSICS

Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell

(2010) Kion Norrman et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Upscaling of polymer solar cell fabrication using full roll-to-roll processing

(2010) Frederik C. Krebs et al.   Nanoscale

Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality

(2010) Andrew J. Medford et al.   OPTICS EXPRESS

Encapsulation of organic solar cells with ultrathin barrier layers deposited by ozone-based atomic layer deposition

(2010) Smita Sarkar et al.   ORGANIC ELECTRONICS

Oxygen doping of P3HT:PCBM blends: Influence on trap states, charge carrier mobility and solar cell performance

(2010) Julia Schafferhans et al.   ORGANIC ELECTRONICS

Sol–gel processed CuOx thin film as an anode interlayer for inverted polymer solar cells

(2010) Ming-Yi Lin et al.   ORGANIC ELECTRONICS

Highly efficient inverted poly(3-hexylthiophene): Methano-fullerene [6,6]-phenyl C71-butyric acid methyl ester bulk heterojunction solar cell with Cs2CO3 and MoO3

(2010) Yeon-Il Lee et al.   ORGANIC ELECTRONICS

Thermo-cleavable polymers: Materials with enhanced photochemical stability

(2010) Matthieu Manceau et al.   POLYMER DEGRADATION AND STABILITY

The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics

(2010) Mathilde R. Lilliedal et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells

(2010) Liying Yang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend

(2010) Matthieu Manceau et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Business, market and intellectual property analysis of polymer solar cells

(2010) Torben D. Nielsen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Thermally stable organic bulk heterojunction photovoltaic cells incorporating an amorphous fullerene derivative as an electron acceptor

(2010) Seul-Ong Kim et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A study of stabilization of P3HT/PCBM organic solar cells by photochemical active TiOx layer

(2010) Jiguang Li et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Degradation of semiconducting polymers by concentrated sunlight

(2010) Thomas Tromholt et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Light-induced degradation of the P3HT-based solar cells active layer

(2010) Matthieu Manceau et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Accelerated weathering testing principles to estimate the service life of organic PV modules

(2010) Olivier Haillant   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Thermocleavable Materials for Polymer Solar Cells with High Open Circuit Voltage—A Comparative Study

(2009) Thomas Tromholt et al.   ACS Applied Materials & Interfaces

Photocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics

(2009) Bumjoon J. Kim et al.   ADVANCED FUNCTIONAL MATERIALS

The effect of molybdenum oxide interlayer on organic photovoltaic cells

(2009) Do Young Kim et al.   APPLIED PHYSICS LETTERS

Transient photovoltaic behavior of air-stable, inverted organic solar cells with solution-processed electron transport layer

(2009) Chang Su Kim et al.   APPLIED PHYSICS LETTERS

A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies

(2009) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

Impact of contact evolution on the shelf life of organic solar cells

(2009) Matthew T. Lloyd et al.   JOURNAL OF MATERIALS CHEMISTRY

Phase Diagram of P3HT/PCBM Blends and Its Implication for the Stability of Morphology

(2009) Jun Zhao et al.   JOURNAL OF PHYSICAL CHEMISTRY B

Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties

(2009) Yongye Liang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Bulk heterojunction solar cells with internal quantum efficiency approaching 100%

(2009) Sung Heum Park et al.   Nature Photonics

All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps

(2009) Frederik C. Krebs   ORGANIC ELECTRONICS

Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes

(2009) Seungchan Han et al.   ORGANIC ELECTRONICS

The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered

(2009) Matthieu Manceau et al.   POLYMER DEGRADATION AND STABILITY

Light-induced degradation of the active layer of polymer-based solar cells

(2009) Agnès Rivaton et al.   POLYMER DEGRADATION AND STABILITY

Solar cell efficiency tables (Version 34)

(2009) Martin A. Green et al.   PROGRESS IN PHOTOVOLTAICS

Estimating the manufacturing cost of purely organic solar cells

(2009) Joseph Kalowekamo et al.   SOLAR ENERGY

Longterm stability of efficient inverted P3HT:PCBM solar cells

(2009) B. Zimmermann et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Large-area organic photovoltaic module—Fabrication and performance

(2009) Ritesh Tipnis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration

(2009) Frederik C. Krebs et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing

(2009) Frederik C. Krebs   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Thickness dependence and solution-degradation effect in poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester based solar cells

(2009) Hui Jin et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Water-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling

(2008) Kion Norrman et al.   ACS Applied Materials & Interfaces

Control of Electric Field Strength and Orientation at the Donor–Acceptor Interface in Organic Solar Cells

(2008) A. Liu et al.   ADVANCED MATERIALS

The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells

(2008) Jens A. Hauch et al.   APPLIED PHYSICS LETTERS

Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer

(2008) Steven K. Hau et al.   APPLIED PHYSICS LETTERS

Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer

(2008) Hua-Hsien Liao et al.   APPLIED PHYSICS LETTERS

Bulk Heterojunctions Based on Native Polythiophene

(2008) Suren A. Gevorgyan et al.   CHEMISTRY OF MATERIALS

Preparation of CaO as OLED getter material through control of crystal growth of CaCO3 by block copolymers in aqueous solution

(2008) Jae-Hyung Park et al.   MATERIALS RESEARCH BULLETIN

Printing Highly Efficient Organic Solar Cells

(2008) Claudia N. Hoth et al.   NANO LETTERS

A novel polymer nanotube composite for photovoltaic packaging applications

(2008) J Ravichandran et al.   NANOTECHNOLOGY

Thermal degradation mechanisms of PEDOT:PSS

(2008) E VITORATOS et al.   ORGANIC ELECTRONICS

p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells

(2008) M. D. Irwin et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells

(2008) Sabine Bertho et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Highly durable inverted-type organic solar cell using amorphous titanium oxide as electron collection electrode inserted between ITO and organic layer

(2008) Takayuki Kuwabara et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Durability of MDMO-PPV and MDMO-PPV: PCBM blends under illumination in the absence of oxygen

(2008) Sylvain Chambon et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime

(2008) Jens A. Hauch et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices

(2008) Matthew O. Reese et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Stability/degradation of polymer solar cells

(2008) Mikkel Jørgensen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS