Lab-made 3D-printed electrochemical sensors for tetracycline determination

Accurate determination of four tetracycline residues in chicken meat by isotope dilution-liquid chromatography/tandem mass spectrometry

(2023) Mohamed A. Gab-Allah et al.   JOURNAL OF CHROMATOGRAPHY A

Reduced graphene oxide/ZnO nanocomposite modified electrode for the detection of tetracycline

(2022) Ana Đurović et al.   JOURNAL OF MATERIALS SCIENCE

Electrochemical (Bio)Sensors Enabled by Fused Deposition Modeling-Based 3D Printing: A Guide to Selecting Designs, Printing Parameters, and Post-Treatment Protocols

(2022) Jéssica Santos Stefano et al.   ANALYTICAL CHEMISTRY

Sample preparation and antibiotic quantification in vinasse generated from sugarcane ethanol fuel production

(2022) Josiel José da Silva et al.   JOURNAL OF CHROMATOGRAPHY A

One-pot co-extraction of dispersive solid phase extraction employing iron-tannic nanoparticles assisted cloud point extraction for the determination of tetracyclines by high-performance liquid chromatography

(2022) Kamolrat Phomai et al.   TALANTA

Nanoporous gold microelectrode arrays using microchips: A highly sensitive and cost-effective platform for electroanalytical applications

(2022) Gilvana P. Siqueira et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Printing parameters affect the electrochemical performance of 3D-printed carbon electrodes obtained by fused deposition modeling

(2022) Raquel G. Rocha et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Preparation of fatty acid-based ternary deep eutectic solvents: Application for determination of tetracycline residue in water, honey and milk samples by using vortex-assisted microextraction

(2022) Muhammad Farooque Lanjwani et al.   FOOD CHEMISTRY

A 3D carbon black disposable electrochemical sensor modified with reduced graphene oxide used for the sensitive determination of levofloxacin

(2022) Thalles Pedrosa Lisboa et al.   NEW JOURNAL OF CHEMISTRY

Electrochemical methods for the determination of antibiotic residues in milk: A critical review

(2021) Lucas Vinícius de Faria et al.   ANALYTICA CHIMICA ACTA

Voltammetric determination of sulfanilamide using a cobalt phthalocyanine chitosan composite

(2021) Flaudiner Gomes de Moura Junior et al.   MONATSHEFTE FUR CHEMIE

New conductive filament ready-to-use for 3D-printing electrochemical (bio)sensors: Towards the detection of SARS-CoV-2

(2021) Jéssica Santos Stefano et al.   ANALYTICA CHIMICA ACTA

Voltammetric and spectrophotometric studies of toxic disinfection by-product 2,6-dichloro-1,4-benzoquinone and its behavior with DNA

(2021) Allan Carlos S. Aguiar et al.   CHEMICAL PAPERS

Rapid and sensitivity determination of macrolides antibiotics using disposable electrochemical sensor based on Super P carbon black and chitosan composite

(2021) William Barros Veloso et al.   MICROCHEMICAL JOURNAL

Flow-through amperometric methods for detection of the bioactive compound quercetin: performance of glassy carbon and screen-printed carbon electrodes

(2020) Geyse Adriana Corrêa Ribeiro et al.   JOURNAL OF SOLID STATE ELECTROCHEMISTRY

Additive-manufactured (3D-printed) electrochemical sensors: A critical review

(2020) Rafael M. Cardoso et al.   ANALYTICA CHIMICA ACTA

Batch injection analysis with electrochemical detection for the simultaneous determination of the diuretics furosemide and hydrochlorothiazide in synthetic urine and pharmaceutical samples

(2020) Eduardo Fonseca Silva et al.   MICROCHEMICAL JOURNAL

Complete Additively Manufactured (3D-Printed) Electrochemical Sensing Platform

(2019) Eduardo M. Richter et al.   ANALYTICAL CHEMISTRY

3D-printed flexible device combining sampling and detection of explosives

(2019) Rafael M. Cardoso et al.   SENSORS AND ACTUATORS B-CHEMICAL

Development of a highly sensitive xanthine oxidase-based biosensor for the determination of antioxidant capacity in Amazonian fruit samples

(2019) Magda Márcia Becker et al.   TALANTA

3D printing for electroanalysis: From multiuse electrochemical cells to sensors

(2018) Rafael M. Cardoso et al.   ANALYTICA CHIMICA ACTA

3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis

(2018) C. Lorena Manzanares Palenzuela et al.   ANALYTICAL CHEMISTRY

Batch-injection Analysis Better than ever: New Materials for Improved Electrochemical Detection and On-site Applications

(2018) Diego P. Rocha et al.   ELECTROANALYSIS

Electrochemical determination of tetracycline using AuNP-coated molecularly imprinted overoxidized polypyrrole sensing interface

(2018) Lavaraj Devkota et al.   ELECTROCHIMICA ACTA

Designing and fabrication of a novel sensitive electrochemical aptasensor based on poly (L-glutamic acid)/MWCNTs modified glassy carbon electrode for determination of tetracycline

(2018) Ali Benvidi et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

An overview of the main foodstuff sample preparation technologies for tetracycline residue determination

(2018) Michael Pérez-Rodríguez et al.   TALANTA

3D Printed Graphene Electrodes’ Electrochemical Activation

(2018) Michelle P. Browne et al.   ACS Applied Materials & Interfaces

Recent advances in sensors for tetracycline antibiotics and their applications

(2018) Xigui Liu et al.   TRAC-TRENDS IN ANALYTICAL CHEMISTRY

Recent Advances in Analytical Chemistry by 3D Printing

(2016) Bethany Gross et al.   ANALYTICAL CHEMISTRY

An amperometric FIA system with carrier recycling: an environmentally friendly approach for atenolol determination in pharmaceutical formulations

(2016) M. A. Franco et al.   Analytical Methods

Determination of Tetracycline on the Surface of a High- Performance Graphene Modified Screen-Printed Carbon Electrode in Milk and Honey Samples

(2016) Hayati Filik et al.   Current Nanoscience

Construction of an electrochemical sensing platform based on platinum nanoparticles supported on carbon for tetracycline determination

(2016) Ricardo T. Kushikawa et al.   SENSORS AND ACTUATORS B-CHEMICAL

Simple and clean determination of tetracyclines by flow injection analysis

(2016) Michael Pérez Rodríguez et al.   SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY

Development and application of an electrochemical sensor modified with multi-walled carbon nanotubes and graphene oxide for the sensitive and selective detection of tetracycline

(2015) Ademar Wong et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Simple and novel electrochemical sensor for the determination of tetracycline based on iron/zinc cations–exchanged montmorillonite catalyst

(2014) Tian Gan et al.   TALANTA

Strategies to avoid electrode fouling for nimesulide detection using unmodified electrodes

(2013) Iranaldo Santos da Silva et al.   Analytical Methods

Two simple and fast electrochemical methods for simultaneous determination of promethazine and codeine

(2013) Polyana Fernandes Pereira et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Pharmacokinetics and residues of tetracycline in crucian carp muscle using capillary electrophoresis on-line coupled with electrochemiluminescence detection

(2012) Biyang Deng et al.   FOOD CHEMISTRY

Determination of tetracycline in environmental water samples at a graphite-polyurethane composite electrode

(2012) Carolina M. F. Calixto et al.   JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY

Chemiluminescence Determination of Tetracyclines via Aluminum Sensitized Fluorescence

(2011) Panagiotis Anastasopoulos et al.   ANALYTICAL LETTERS

Overview on liquid chromatographic analysis of tetracycline residues in food matrices

(2011) Armağan Önal   FOOD CHEMISTRY

Magnetic solid phase extraction based on phenyl silica adsorbent for the determination of tetracyclines in milk samples by capillary electrophoresis

(2011) Israel S. Ibarra et al.   JOURNAL OF CHROMATOGRAPHY A

Tetracycline adsorption on montmorillonite: pH and ionic strength effects

(2007) M.E. Parolo et al.   APPLIED CLAY SCIENCE