Bio-lubricants from vegetable oils: Characterization, modifications, applications and challenges – Review
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Bio-lubricants from vegetable oils: Characterization, modifications, applications and challenges – Review
Authors
Keywords
-
Journal
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
Volume 182, Issue -, Pages 113413
Publisher
Elsevier BV
Online
2023-06-07
DOI
10.1016/j.rser.2023.113413
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants
- (2022) Leonardo I. Farfan-Cabrera et al. MOLECULES
- A critical review on liquid superlubricitive technology for attaining ultra-low friction
- (2022) Anil Dhanola et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Evaluation of physicochemical, tribological and oxidative stability properties of chemically modified rice bran and karanja oils as viable lubricant base stocks for industrial applications
- (2022) Sneha Edla et al. TRIBOLOGY INTERNATIONAL
- A review on properties, challenges and commercial aspects of eco-friendly biolubricants productions
- (2022) Uzair Ahmad et al. CHEMOSPHERE
- A review on bio-based feedstock, synthesis, and chemical modification to enhance tribological properties of biolubricants
- (2022) Santosh Kumar Kurre et al. INDUSTRIAL CROPS AND PRODUCTS
- Lubrication of textured journal bearing by using vegetable oil: A review of approaches, challenges, and opportunities
- (2021) Z. Rasep et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Single-Cell Oils from Oleaginous Microorganisms as Green Bio-Lubricants: Studies on Their Tribological Performance
- (2021) Alok Patel et al. Energies
- Challenges and opportunities of marine propulsion with alternative fuels
- (2021) Meng-Choung Chiong et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Tribological Investigation on the Friction and Wear Behaviors of Biogenic Lubricating Greases in Steel–Steel Contact
- (2020) Nazli Acar et al. Applied Sciences-Basel
- An Overview of the Biolubricant Production Process: Challenges and Future Perspectives
- (2020) Juan Antonio Cecilia et al. Processes
- Chemical and rheological assessment of produced biolubricants from different vegetable oils
- (2020) N.K. Attia et al. FUEL
- Green Metalworking Fluids for sustainable machining applications: A review
- (2020) K.C Wickramasinghe et al. JOURNAL OF CLEANER PRODUCTION
- Improve the thermal conductivity of 10w40-engine oil at various temperature by addition of Al2O3/Fe2O3 nanoparticles
- (2019) Mohsen Tahmasebi Sulgani et al. JOURNAL OF MOLECULAR LIQUIDS
- Recent developments and prospectives of acid-base and redox catalytic processes by metal oxides
- (2019) Jacques C. Védrine APPLIED CATALYSIS A-GENERAL
- Investigation of the thermal degradation of the biolubricant through TG-FTIR and characterization of the biodiesel – Pequi (Caryocar brasiliensis) as energetic raw material
- (2019) Elano Nery Ferreira et al. FUEL
- Risk Assessment for Metalworking Fluids and Respiratory Outcomes
- (2019) Robert M. Park Safety and Health at Work
- Investigation of epoxidation of used cooking oils with homogeneous and heterogeneous catalysts
- (2019) Maria Kurańska et al. JOURNAL OF CLEANER PRODUCTION
- Biolubricants through renewable hydrocarbons: A perspective for new opportunities
- (2019) Calvin K. Ho et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Synthesis of Trimethylolpropane Esters by Base‐Catalyzed Transesterification
- (2019) Jieyu Nie et al. EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY
- Physicochemical and tribological properties of microalgae oil as biolubricant for hydrogen-powered engine
- (2019) Mei Yee Cheah et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Comparative evaluation of lubricant properties of biodegradable blend of coconut and mustard oil
- (2019) Ayamannil Sajeeb et al. JOURNAL OF CLEANER PRODUCTION
- Nonedible vegetable oil-based cutting fluids for machining processes – a review
- (2019) Rahul Katna et al. MATERIALS AND MANUFACTURING PROCESSES
- A Simple Pseudo-Homogeneous Reversible Kinetic Model for the Esterification of Different Fatty Acids with Methanol in the Presence of Amberlyst-15
- (2018) Mauro Banchero et al. Energies
- Improved production of biolubricants from soybean oil and different polyols via esterification reaction catalyzed by immobilized lipase from Candida rugosa
- (2018) Elisa D.C. Cavalcanti et al. FUEL
- Environmentally friendly functional fluids from renewable and sustainable sources-A review
- (2018) Jagadeesh K. Mannekote et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- A review on the chemistry, production, and technological potential of bio-based lubricants
- (2018) N.A. Zainal et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Tribological behavior of biolubricant base stocks and additives
- (2018) Chung-Hung Chan et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Improving engine oil lubrication in light-duty vehicles by using of dispersing MWCNT and ZnO nanoparticles in 5W50 as viscosity index improvers (VII)
- (2018) Mohammad Hemmat Esfe et al. APPLIED THERMAL ENGINEERING
- Biolubricant production from edible and novel indigenous vegetable oils: mainstream methodology, and prospects and challenges in Iran
- (2018) Masoud Dehghani Soufi et al. Biofuels Bioproducts & Biorefining-Biofpr
- The tribological performances of Super Olein as fluid lubricant using four-ball tribotester
- (2018) P. Zulhanafi et al. TRIBOLOGY INTERNATIONAL
- A review on bio-based lubricants and their applications
- (2017) A.Z. Syahir et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
- (2017) Shuming Guo et al. JOURNAL OF CLEANER PRODUCTION
- Friction and wear response of vegetable oils and their blends with mineral engine oil in a reciprocating sliding contact at severe contact conditions
- (2017) Adli Bahari et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Sustainability of a non-edible vegetable oil based bio-lubricant for automotive applications: A review
- (2017) Yashvir Singh et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- A methodological review on bio-lubricants from vegetable oil based resources
- (2017) Tirth M. Panchal et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Microalgae biomass production for a biorefinery system: Recent advances and the way towards sustainability
- (2017) L. Moreno-Garcia et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Improved thermo-oxidative stability of structurally modified waste cooking oil methyl esters for bio-lubricant application
- (2016) Venu Babu Borugadda et al. JOURNAL OF CLEANER PRODUCTION
- Development of biolubricants from vegetable oils via chemical modification
- (2016) Josiah McNutt et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Modern advancements in lubricating grease technology
- (2016) Piet M. Lugt TRIBOLOGY INTERNATIONAL
- Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant
- (2015) Chen Boshui et al. APPLIED SURFACE SCIENCE
- Influence of structural modification on lubricant properties of sal fat-based lubricant base stocks
- (2015) K. Kamalakar et al. INDUSTRIAL CROPS AND PRODUCTS
- New hydraulic biolubricants based on passion fruit and moringa oils and their epoxy
- (2015) Maria Susana Silva et al. INDUSTRIAL CROPS AND PRODUCTS
- Evaluation of physiochemical and tribological properties of rice bran oil – biodegradable and potential base stoke for industrial lubricants
- (2015) S. Rani et al. INDUSTRIAL CROPS AND PRODUCTS
- Lubricant properties of biodegradable rubber tree seed (Hevea brasiliensis Muell. Arg) oil
- (2015) Amith Aravind et al. INDUSTRIAL CROPS AND PRODUCTS
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- A review of biolubricants in drilling fluids: Recent research, performance, and applications
- (2015) Dina Kania et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- The synthesis of bio-lubricant based oil by hydrolysis and non-catalytic of palm oil mill effluent (POME) using lipase
- (2015) M.T.S Syaima et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- A review of processing and machinery for Jatropha curcas L. fruits and seeds in biodiesel production: Harvesting, shelling, pretreatment and storage
- (2015) Bo Yuan Lim et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Formation and tribological properties of hollow sphere-like nano-MoS2 precipitated in TiO2 particles
- (2015) Z.Y. Xu et al. TRIBOLOGY INTERNATIONAL
- Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles
- (2015) M. Gulzar et al. TRIBOLOGY INTERNATIONAL
- Frictional Behavior of a Wet Clutch Using Blends of Automatic Transmission Fluid (ATF) and Biolubricant (JatrophaOil) in a Pin-on-Disk Tester
- (2015) Leonardo Israel Farfán-Cabrera et al. TRIBOLOGY TRANSACTIONS
- Evaluation of the tribological and thermo-physical properties of coconut oil added with MoS 2 nanoparticles at elevated temperatures
- (2015) Chacko Preno Koshy et al. WEAR
- Synthesis of Epoxidized Canola Oil Using a Sulfated-SnO2 Catalyst
- (2014) Asish K. R. Somidi et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Synthesis of Epoxy Jatropha Oil and its Evaluation for Lubricant Properties
- (2014) Arukali Sammaiah et al. Journal of Oleo Science
- Biodiesel from vegetable oils
- (2014) Titipong Issariyakul et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- The prospects of biolubricants as alternatives in automotive applications
- (2014) H.M. Mobarak et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- The Formation of Tribofilms of MoS2 Nanotubes on Steel and DLC-Coated Surfaces
- (2014) M. Kalin et al. TRIBOLOGY LETTERS
- Tribological Properties of Engine Oil with Carbon Nano-horns as Nano-additives
- (2014) V. Zin et al. TRIBOLOGY LETTERS
- Rheological and Tribological Characterization of a New Acylated Chitosan–Based Biodegradable Lubricating Grease: A Comparative Study with Traditional Lithium and Calcium Greases
- (2014) R. Sánchez et al. TRIBOLOGY TRANSACTIONS
- Synthesis of bio-lubricant from epoxy canola oil using sulfated Ti-SBA-15 catalyst
- (2013) Rajesh V. Sharma et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant
- (2013) N.W.M. Zulkifli et al. ENERGY
- Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil)
- (2013) M. Shahabuddin et al. INDUSTRIAL CROPS AND PRODUCTS
- Comparative study of tribological properties of trimethylolpropane-based biolubricants derived from methyl oleate and canola biodiesel
- (2013) Phani K. Sripada et al. INDUSTRIAL CROPS AND PRODUCTS
- Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools
- (2013) Sunday Albert Lawal et al. JOURNAL OF CLEANER PRODUCTION
- Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
- (2013) Mohd Sayuti et al. JOURNAL OF CLEANER PRODUCTION
- Effect of amorphous/recycled polypropylene ratio on thermo-mechanical properties of blends for lubricant applications
- (2013) J.E. Martín-Alfonso et al. POLYMER TESTING
- Tribological behaviour of polymeric materials in water-lubricated contacts
- (2013) A Golchin et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions
- (2013) S.M. Alves et al. TRIBOLOGY INTERNATIONAL
- Morphological Influence of Molybdenum Disulfide on the Tribological Properties of Rapeseed Oil
- (2013) Ze Yin Xu et al. TRIBOLOGY LETTERS
- PTFE based nano-lubricants
- (2013) Mukesh Kumar Dubey et al. WEAR
- Synthesis and characterization of calcium methoxide as heterogeneous catalyst for trimethylolpropane esters conversion reaction
- (2012) Hassan Masood et al. APPLIED CATALYSIS A-GENERAL
- Influence of fatty acid composition on chemical changes in blends of sunflower oils during thermoxidation and frying
- (2012) Susana Marmesat et al. FOOD CHEMISTRY
- Kinetic study of jatropha biolubricant from transesterification of jatropha curcas oil with trimethylolpropane: Effects of temperature
- (2012) Mohamad Faiz Mukhtar Gunam Resul et al. INDUSTRIAL CROPS AND PRODUCTS
- Experimental evaluation on the tribological properties of coconut oil by the addition of CuO nanoparticles
- (2012) Manu Varghese Thottackkad et al. International Journal of Precision Engineering and Manufacturing
- Investigation of polyacrylates copolymers as lube oil viscosity index improvers
- (2012) Salah A. Mohamad et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Compressibilities and viscosities of reference and vegetable oils for their use as hydraulic fluids and lubricants
- (2011) Teresa Regueira et al. GREEN CHEMISTRY
- The physicochemical and tribological properties of oleic acid based triester biolubricants
- (2011) Nadia Salih et al. INDUSTRIAL CROPS AND PRODUCTS
- Potential non-edible oil resources as biodiesel feedstock: An Indian perspective
- (2011) Ashwani Kumar et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Development of ecofriendly/biodegradable lubricants: An overview
- (2011) Ponnekanti Nagendramma et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Antiwear properties of carbon-coated copper nanoparticles used as an additive to a polyalphaolefin
- (2011) J.L. Viesca et al. TRIBOLOGY INTERNATIONAL
- Simulation of dense granular flows: Comparison with experiments
- (2010) Riccardo Artoni et al. CHEMICAL ENGINEERING SCIENCE
- Biolubricants: Raw materials, chemical modifications and environmental benefits
- (2010) Jumat Salimon et al. EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY
- Viscosity modification of different vegetable oils with EVA copolymer for lubricant applications
- (2010) L.A. Quinchia et al. INDUSTRIAL CROPS AND PRODUCTS
- Investigation of Wear Performance of Canola Oil Containing Boric Acid under Boundary Friction Condition
- (2010) HAYRETTIN DUZCUKOGLU et al. TRIBOLOGY TRANSACTIONS
- Frictional Characteristics of IF-WS2Nanoparticles in Simulated Engine Conditions
- (2010) BURAK GULLAC et al. TRIBOLOGY TRANSACTIONS
- Viscosity Modification of High-Oleic Sunflower Oil with Polymeric Additives for the Design of New Biolubricant Formulations
- (2009) L. A. Quinchia et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Film-forming properties and traction of non- functionalized polyalkylmethacrylate solutions under transition from elastohydrodynamic lubrication to thin-film lubrication
- (2009) M Muraki et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Synthesis of alkyl-branched fatty acids
- (2008) Ursula Biermann et al. EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY
- Synthesis and physical properties of mono-estolides with varying chain lengths
- (2008) Steven C. Cermak et al. INDUSTRIAL CROPS AND PRODUCTS
- Lubricant Base Stock Potential of Chemically Modified Vegetable Oils
- (2008) Sevim Z. Erhan et al. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started