Effect of in situ and furnace thermal annealing on the mechanical properties and sustainability of 3D printed carbon-peek composites

Process parameters effect on environmental sustainability of composites FFF technology

(2022) Iacopo Bianchi et al.   MATERIALS AND MANUFACTURING PROCESSES

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites

(2021) Dong Yang et al.   POLYMER TESTING

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach

(2021) Krzysztof Rodzeń et al.   Polymers

Modelling the stiffness of plastic springs manufactured via additive manufacturing

(2021) Enea Sacco et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

PEEK based cranial reconstruction using thermal assisted incremental sheet forming

(2021) Lin-feng Chen et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites

(2021) Krzysztof Rodzeń et al.   Polymers

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

(2020) Peng WANG et al.   Chinese Journal of Aeronautics

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

(2020) Peng Wang et al.   COMPOSITES PART B-ENGINEERING

Life cycle impact assessment of different manufacturing technologies for automotive CFRP components

(2020) Archimede Forcellese et al.   JOURNAL OF CLEANER PRODUCTION

An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation

(2019) Behnam Akhoundi et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

3D printing: a critical review of current development and future prospects

(2019) Md. Hazrat Ali et al.   RAPID PROTOTYPING JOURNAL

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

(2019) Peng Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

(2019) Cemile Basgul et al.   Journal of the Mechanical Behavior of Biomedical Materials

Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock

(2019) Xianglian Xiao et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Life Cycle Assessment of a Vanadium Redox Flow Battery

(2018) Selina Weber et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

(2017) Chuncheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Characterization of thermally annealed PEEK and CFR-PEEK composites: Structure-properties relationships

(2017) Marco Regis et al.   POLYMER DEGRADATION AND STABILITY

Failure investigation of fused deposition modelling parts fabricated at different raster angles under tensile and flexural loading

(2015) Ashu Garg et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Machining behaviour of three high-performance engineering plastics

(2014) Juan C Campos Rubio et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfilling

(2013) Robert A. Witik et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Build orientation analysis for minimum cost determination in FDM

(2011) D S Ingole et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Environmental impact analysis of composite use in car manufacturing

(2009) J.R. Duflou et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY