Biomechanical comparison of titanium alloy additively manufactured and conventionally manufactured plate-screw constructs

Evaluation of the Properties of 3D-Printed Ti Alloy Plates: In Vivo and In Vitro Comparative Experimental Study

(2023) Qi Wang et al.   Journal of Clinical Medicine

Evaluation of bimodal microstructures in selective-laser-melted and heat-treated Ti-6Al-4V

(2023) Tom McKenna et al.   MATERIALS & DESIGN

Accuracy of virtual surgical planning and custom three-dimensionally printed osteotomy and reduction guides for acute uni- and biapical correction of antebrachial deformities in dogs

(2022) Christina C. De Armond et al.   JAVMA-JOURNAL OF THE AMERICAN VETERINARY MEDICAL ASSOCIATION

Effects of Annealing and Solution Treatments on the Microstructure and Mechanical Properties of Ti6Al4V Manufactured by Selective Laser Melting

(2022) Hassanen Jaber et al.   Materials

Force plate analysis of ground reaction forces in relation to gait velocity of healthy Beagles

(2022) Tom Ichinohe et al.   AMERICAN JOURNAL OF VETERINARY RESEARCH

High cycle fatigue behavior of a selective laser melted Ti6Al4V alloy: Anisotropy, defects effect and life prediction

(2022) Zehui Jiao et al.   INTERNATIONAL JOURNAL OF FATIGUE

Biomaterials in Orthopedic Devices: Current Issues and Future Perspectives

(2022) Nina Filip et al.   Coatings

A Review of Research Progress in Selective Laser Melting (SLM)

(2022) Bingwei Gao et al.   Micromachines

Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates

(2021) Saurabh Kumar Gupta et al.   Journal of the Mechanical Behavior of Biomedical Materials

Bending properties of additively manufactured commercially pure titanium (CPTi) limited contact dynamic compression plate (LC-DCP) constructs: Effect of surface treatment

(2021) Seungjong Lee et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effect of heating treatment on the microstructural evolution and dynamic tensile properties of Ti-6Al-4V alloy produced by selective laser melting

(2021) Yang Liu et al.   Journal of Manufacturing Processes

Three-Dimensional-Printed Patient-Specific Osteotomy Guides, Repositioning Guides and Titanium Plates for Acute Correction of Antebrachial Limb Deformities in Dogs

(2020) Darren R. Carwardine et al.   VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY

Impaired bone quality characterized by apatite orientation under stress shielding following fixing of a fracture of the radius with a 3D printed Ti-6Al-4V custom-made bone plate in dogs

(2020) Keiichiro Mie et al.   PLoS One

Computer-Assisted Surgery Using 3D Printed Saw Guides for Acute Correction of Antebrachial Angular Limb Deformities in Dogs

(2019) Andrew Worth et al.   VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY

Limb‐sparing in dogs using patient‐specific, three‐dimensional‐printed endoprosthesis for distal radial osteosarcoma: A pilot study

(2019) Bernard Séguin et al.   Veterinary and Comparative Oncology

Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects

(2019) J.W. Pegues et al.   INTERNATIONAL JOURNAL OF FATIGUE

Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance

(2019) R. Molaei et al.   INTERNATIONAL JOURNAL OF FATIGUE

A 3-dimensional-printed patient-specific guide system for minimally invasive plate osteosynthesis of a comminuted mid-diaphyseal humeral fracture in a cat

(2018) Bill Oxley   VETERINARY SURGERY

Mechanical properties of 18 different AO bone plates and the clamp-rod internal fixation system tested on a gap model construct

(2018) R. Frei et al.   VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY

Open reduction and cranial bone plate fixation of fractures involving the distal aspect of the radius and ulna in miniature- and toy-breed dogs: 102 cases (2008–2015)

(2017) Rebecca De Arburn Parent et al.   JAVMA-JOURNAL OF THE AMERICAN VETERINARY MEDICAL ASSOCIATION

Clinical outcomes of patient-specific porous titanium endoprostheses in dogs with tumors of the mandible, radius, or tibia: 12 cases (2013–2016)

(2017) Jonathan P. Bray et al.   JAVMA-JOURNAL OF THE AMERICAN VETERINARY MEDICAL ASSOCIATION

Accuracy of a patient-specific 3D printed drill guide for placement of cervical transpedicular screws

(2017) Sinead E. Hamilton-Bennett et al.   VETERINARY SURGERY

Comparison of conventional reconstruction plate versus direct metal laser sintering plate: an in vitro mechanical characteristics study

(2017) Pusheng Xie et al.   Journal of Orthopaedic Surgery and Research

Bone plate-screw constructs for osteosynthesis – recommendations for standardized mechanical torsion and bending tests

(2017) Hendrik Schorler et al.   Biomedical Engineering-Biomedizinische Technik

Conventional bone plate fixation of distal radius and ulna fractures in toy breed dogs

(2016) JM Ramírez et al.   AUSTRALIAN VETERINARY JOURNAL

3D-printing techniques in a medical setting: a systematic literature review

(2016) Philip Tack et al.   Biomedical Engineering Online

Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research

(2016) P. Li et al.   INTERNATIONAL JOURNAL OF FATIGUE

Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting

(2016) Jingjing Yang et al.   MATERIALS & DESIGN

Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting

(2015) Haijun Gong et al.   MATERIALS & DESIGN

In VitroBiomechanical Comparison of 3.5 String of Pearl Plate Fixation to 3.5 Locking Compression Plate Fixation in a Canine Fracture Gap Model

(2014) Renee-Claire Malenfant et al.   VETERINARY SURGERY

Effect of plate working length on plate stiffness and cyclic fatigue life in a cadaveric femoral fracture gap model stabilized with a 12-hole 2.4 mm locking compression plate

(2013) Peini Chao et al.   BMC Veterinary Research

Mechanical behaviour of low-cost dynamic compression plates correlates with manufacturing quality standards

(2013) Edward Aluede et al.   INTERNATIONAL ORTHOPAEDICS

Comparison of temporospatial and kinetic variables of walking in small and large dogs on a pressure-sensing walkway

(2011) Jongmin Kim et al.   AMERICAN JOURNAL OF VETERINARY RESEARCH

Single cycle to failure in bending of three standard and five locking plates and plate constructs

(2011) C. A. Blake et al.   VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY

Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders

(2010) Luca Facchini et al.   RAPID PROTOTYPING JOURNAL

In Vitro Mechanical Comparison of 2.0 and 2.4 Limited-Contact Dynamic Compression Plates and 2.0 Dynamic Compression Plates of Different Thicknesses

(2010) Adam M. Strom et al.   VETERINARY SURGERY

An in vitro mechanical comparison of tibial plateau levelling osteotomy plates

(2009) D. Coker et al.   VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY

Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications

(2008) L.E. Murr et al.   Journal of the Mechanical Behavior of Biomedical Materials