Mechanics of AlCuNiTi alloy orthogonal micro-cutting

Cyclic plasticity and deformation mechanism of AlCrCuFeNi high entropy alloy

(2023) Hoang-Giang Nguyen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High entropy alloy strengthening modelling

(2022) Chengwei Zang et al.   MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING

Cold welding of ultrathin metallic glass nanowires with side-to-side contact using molecular dynamics simulations

(2022) Yuhang Zhang et al.   Materials Today Communications

Integrating machine learning with mechanistic models for predicting the yield strength of high entropy alloys

(2022) Shunshun Liu et al.   JOURNAL OF APPLIED PHYSICS

Experimental and simulation study of ultrasonic elliptical vibration cutting SiCp/Al composites: chip formation and surface integrity study

(2022) Yongsheng Du et al.   Journal of Materials Research and Technology-JMR&T

Molecular dynamics simulation on crystal defects of single-crystal silicon during elliptical vibration cutting

(2022) Changlin Liu et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Microstructure evolution and corrosion mechanism of laser cladded Zr-Cu-Ni-Al in-situ metallic glass matrix composite coatings

(2021) Liwei Hu et al.   SURFACE & COATINGS TECHNOLOGY

Machining mechanism and deformation behavior of high-entropy alloy under elliptical vibration cutting

(2021) Dinh-Quan Doan et al.   INTERMETALLICS

Thermal annealing effect on the corrosion resistance of AlCuNiTiZr high entropy alloy films in sulfuric acid solution

(2021) Kai Huang et al.   THIN SOLID FILMS

Improved mechanical properties and corrosion resistance of Zr-Cu-Al-Ni-Ti bulk metallic glass by Fe substitution for Ni

(2021) Hongqi Shi et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Characterization and Properties of CuZrAlTiNiSi High Entropy Alloy Coating Obtained By Mechanical Alloying and Vacuum Hot-Pressing Sintering

(2020) Zihan Han et al.   JOM

Design of Novel Non-equiatomic Cu-Ni-Al-Ti Composite Medium-Entropy Alloys

(2020) Gökhan Polat et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Nanotribological characteristics and strain hardening of amorphous Cu64Zr36/ crystalline Cu nanolaminates

(2020) Dinh-Quan Doan et al.   TRIBOLOGY INTERNATIONAL

Effects of grain and twin boundary on friction and contact characteristics of CuZrAl nanocrystallines

(2020) Dinh-Quan Doan et al.   APPLIED SURFACE SCIENCE

Effects of flaw shape and size on fracture toughness and destructive mechanism inside Ni15Al70Co15 metallic glass

(2020) Thi-Xuyen Bui et al.   COMPUTATIONAL MATERIALS SCIENCE

Model interatomic potentials for Fe–Ni–Cr–Co–Al high-entropy alloys

(2020) Diana Farkas et al.   JOURNAL OF MATERIALS RESEARCH

High-entropy alloys by mechanical alloying: A review

(2019) Mayur Vaidya et al.   JOURNAL OF MATERIALS RESEARCH

Influence of elliptical vibration on the behavior of silicon during nanocutting

(2019) Houfu Dai et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy

(2019) Jing Su et al.   ACTA MATERIALIA

A novel design method for 3D elliptical vibration-assisted cutting mechanism

(2019) Chen Zhang et al.   MECHANISM AND MACHINE THEORY

Design and kinematic analysis of a novel decoupled 3D ultrasonic elliptical vibration assisted cutting mechanism

(2019) Chen Zhang et al.   ULTRASONICS

Structure–Property Relationships in Shape Memory Metallic Glass Composites

(2019) Daniel Şopu et al.   Materials

Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications

(2019) Shaojian Zhang et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Investigation of Cutting Force in Longitudinal-Torsional Ultrasonic-Assisted Milling of Ti-6Al-4V

(2019) Niu et al.   Materials

Frictional properties of surface textures fabricated on hardened steel by elliptical vibration diamond cutting

(2019) Jianguo Zhang et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

An atomic-level understanding of the friction and wear behaviors of Ti2AlN/TiAl composite via MD simulations

(2019) Xiuli Han et al.   TRIBOLOGY INTERNATIONAL

Tribological behavior of an amorphous Zr20Ti20Cu20Ni20Be20 high-entropy alloy studied using a nanoscratch technique

(2019) Y.Y. Zhao et al.   INTERMETALLICS

Nanoscratching of metallic glasses – An atomistic study

(2019) Karina E. Avila et al.   TRIBOLOGY INTERNATIONAL

Comparative investigation of tool wear mechanism and corresponding machined surface characterization in feed-direction ultrasonic vibration assisted milling of Ti–6Al–4V from dynamic view

(2019) Chenbing Ni et al.   WEAR

Residual stress and elastic recovery of imprinted Cu-Zr metallic glass films using molecular dynamic simulation

(2019) Dinh-Quan Doan et al.   COMPUTATIONAL MATERIALS SCIENCE

Investigation on surface morphology and crystalline phase deformation of Al80Li5Mg5Zn5Cu5 high-entropy alloy by ultra-precision cutting

(2019) Zhiyuan Huang et al.   MATERIALS & DESIGN

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

(2019) E.P. George et al.   ACTA MATERIALIA

Effects of planetary ball milling on AlCoCrFeNi high entropy alloys prepared by Spark Plasma Sintering: Experiments and molecular dynamics study

(2019) A. Fourmont et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Work hardening mechanism based on molecular dynamics simulation in cutting Ni–Fe–Cr series of Ni-based alloy

(2019) YiHang Fan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Modeling and simulation of the distribution of undeformed chip thicknesses in surface grinding

(2018) Yuzhou Zhang et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Wear and oxidation resistances of AlCrFeNiTi-based high entropy alloys

(2018) Zhi-Sheng Nong et al.   INTERMETALLICS

Microstructures and properties of equiatomic CuZr and CuZrAlTiNi bulk alloys fabricated by mechanical alloying and spark plasma sintering

(2017) Wenjuan Ge et al.   JOURNAL OF MATERIALS SCIENCE

Tool microstructure impact on the wear behavior of ferrite iron during nanoscratching: An atomic level simulation

(2017) A.T. AlMotasem et al.   WEAR

A study on the surface quality and brittle–ductile transition during the elliptical vibration-assisted nanocutting process on monocrystalline silicon via molecular dynamic simulations

(2017) Bo Zhu et al.   RSC Advances

Surface generation of freeform surfaces in diamond turning by applying double-frequency elliptical vibration cutting

(2016) Xiaoqin Zhou et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Tribological Properties of AlCrCuFeNi2 High-Entropy Alloy in Different Conditions

(2016) Yong Liu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of vibration frequency on vibration-assisted nano-scratch process of mono-crystalline copper via molecular dynamics simulation

(2016) Bo Zhu et al.   AIP Advances

Internal stress and its effect on mechanical strength of metallic glass nanowires

(2015) Qi Zhang et al.   ACTA MATERIALIA

Effect of iron content on the structure and mechanical properties of Al25Ti25Ni25Cu25 and (AlTi)60-xNi20Cu20Fex (x=15, 20) high-entropy alloys

(2015) É. Fazakas et al.   APPLIED SURFACE SCIENCE

Diamond machining of silicon: A review of advances in molecular dynamics simulation

(2015) Saurav Goel et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Correlation of microstructural and corrosion characteristics of quaternary shape memory alloys Cu–Al–Ni–X (X=Mn or Ti)

(2015) S.N. SAUD et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer

(2014) S.G. Ma et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Molecular dynamics simulation of nanoindentation of Fe3C and Fe4C

(2014) Saurav Goel et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

AlCoCrCuFeNi high entropy alloy cluster growth and annealing on silicon: A classical molecular dynamics simulation study

(2013) Lu Xie et al.   APPLIED SURFACE SCIENCE

Entropies in Alloy Design for High-Entropy and Bulk Glassy Alloys

(2013) Akira Takeuchi et al.   Entropy

Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing

(2013) Yan Wang et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Plastic activity in nanoscratch molecular dynamics simulations of pure aluminium

(2013) Till Junge et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strain localization in a nanocrystalline metal: Atomic mechanisms and the effect of testing conditions

(2013) Timothy J. Rupert   JOURNAL OF APPLIED PHYSICS

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V

(2013) Sandip Patil et al.   ULTRASONICS

Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding

(2012) Xing-Wu Qiu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Prediction of high-entropy stabilized solid-solution in multi-component alloys

(2012) X. Yang et al.   MATERIALS CHEMISTRY AND PHYSICS

Shape memory properties of highly textured Cu–Al–Ni–(Ti) alloys

(2012) C.E. Sobrero et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Structure identification methods for atomistic simulations of crystalline materials

(2012) Alexander Stukowski   MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING

Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools

(2011) Xinquan Zhang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The conflicts between strength and toughness

(2011) Robert O. Ritchie   NATURE MATERIALS

Analysis of regenerative chatter suppression with adding the ultrasonic elliptical vibration on the cutting tool

(2010) Chunxiang Ma et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Correlation between the elastic modulus and the intrinsic plastic behavior of metallic glasses: The roles of atomic configuration and alloy composition

(2009) Y.Q. Cheng et al.   ACTA MATERIALIA

Effect of thermal annealing on nanoimprinted Cu–Ni alloys using molecular dynamics simulation

(2009) Te-Hua Fang et al.   APPLIED SURFACE SCIENCE

Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting

(2009) Chandra Nath et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Effect of rare earth Y addition on the microstructure and mechanical properties of high entropy AlCoCrCuNiTi alloys

(2009) Zhaohua Hu et al.   MATERIALS & DESIGN

Molecular dynamics study on compressive strength of monocrystalline, nanocrystalline and amorphous Si mold for nanoimprint lithography

(2009) Kazuhiro Tada et al.   MICROELECTRONIC ENGINEERING

Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process

(2008) J.J. Zhang et al.   APPLIED SURFACE SCIENCE

Analysis of 3D elliptical vibration cutting with thin shear plane model

(2008) E. Shamoto et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer

(2008) W.J. Zong et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE