Micro-Mechanical Characterisation of Hydrogen Embrittlement and Fatigue Crack Growth Behaviours in Metastable Austenitic Stainless Steels with Microstructure Refinement

High strength and high ductility of a severely deformed high-entropy alloy in the presence of hydrogen

(2023) Abbas Mohammadi et al.   CORROSION SCIENCE

Gradient-structured high-entropy alloy with improved combination of strength and hydrogen embrittlement resistance

(2022) Abbas Mohammadi et al.   CORROSION SCIENCE

Microstructure and defect effects on strength and hydrogen embrittlement of high-entropy alloy CrMnFeCoNi processed by high-pressure torsion

(2022) Abbas Mohammadi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparative Study of Shear Fracture between Fe-based Amorphous and Ultrafine-grained Alloys Using Micro-tensile Testing

(2022) Yuki Tampa et al.   ISIJ INTERNATIONAL

Comparative Study of Microstructure-sensitive Fatigue Crack Propagation in Coarse- and Fine-grained Microstructures between Stable and Metastable Austenitic Stainless Steels Using Miniature Specimen

(2021) Aya Matsushita et al.   ISIJ INTERNATIONAL

Strain rate sensitivity of hydrogen-assisted ε-martensitic transformation and associated hydrogen embrittlement in high-Mn steel

(2021) Chunxi Hao et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Enhanced resistance to fatigue crack propagation in metastable austenitic stainless steel by nanotwin bundles

(2021) Aya Matsushita et al.   SCRIPTA MATERIALIA

Study of basal and pyramidal slips in Mg-Y alloys using micro-pillar compression

(2020) Jing Wu et al.   PHILOSOPHICAL MAGAZINE

Temperature dependence of prismatic slip in a single-crystalline long-period stacking ordered Mg–Zn–Y alloy

(2020) Kosuke Takagi et al.   SCRIPTA MATERIALIA

Micro-mechanical characterisation of hydrogen embrittlement in nano-twinned metastable austenitic stainless steel

(2020) Shohei Ueki et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Hydrogen-assisted Crack Propagation in Pre-strained Twinning-induced Plasticity Steel: from Initiation at a Small Defect to Failure

(2020) Abbas Mohammadi et al.   ISIJ INTERNATIONAL

A review of experimental approaches to fracture toughness evaluation at the micro-scale

(2019) J. Ast et al.   MATERIALS & DESIGN

Scale law of complex deformation transitions of nanotwins in stainless steel

(2019) A. Y. Chen et al.   Nature Communications

Crystallographic Characterisation of Hydrogen-induced Twin Boundary Separation in Type 304 Stainless Steel Using Micro-tensile Testing

(2019) Shohei Ueki et al.   ISIJ INTERNATIONAL

Fatigue crack growth behaviour in single-colony lamellar structure of Ti–6Al–4V

(2019) Yoji Mine et al.   SCRIPTA MATERIALIA

A nanotwinned austenite stainless steel with high hydrogen embrittlement resistance

(2019) Y.H. Fan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Metallurgical Alchemy by Ultra-Severe Plastic Deformation via High-Pressure Torsion Process

(2019) Kaveh Edalati   MATERIALS TRANSACTIONS

Microstructure-sensitive fatigue crack growth in lath martensite of low carbon steel

(2019) Shohei Ueki et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Anisotropy of strength and plasticity in single-colony lamellar structure of Ti‒6Al‒4V alloy

(2019) Yoji Mine et al.   SCRIPTA MATERIALIA

Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales

(2018) G. Dehm et al.   ACTA MATERIALIA

Resistance to mechanically small fatigue crack growth in ultrafine grained interstitial-free steel fabricated by accumulative roll-bonding

(2018) X. Lin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Improved resistance to hydrogen environment embrittlement of warm-deformed 304 austenitic stainless steel in high-pressure hydrogen atmosphere

(2018) Xingyang Chen et al.   CORROSION SCIENCE

Effect of ultrafine grain refinement on hydrogen embrittlement of metastable austenitic stainless steel

(2017) Yoji Mine et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Plasticity and crack extension in single-crystalline long-period stacking ordered structures of Mg 85 Zn 6 Y 9 alloy under micro-bending

(2017) Yoji Mine et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing

(2017) Z.J. Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Role of nanotwins on fatigue crack growth resistance – Experiments and theory

(2016) Sertan Alkan et al.   INTERNATIONAL JOURNAL OF FATIGUE

FE analysis of hydrogen diffusion around a crack tip in an austenitic stainless steel

(2016) Yanfei Wang et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Hydrogen Embrittlement of Ultrafine-grained Austenitic Stainless Steels Processed by High-pressure Torsion at Moderate Temperature

(2016) Yoji Mine et al.   ISIJ INTERNATIONAL

Deformation behaviour of nano-twinned single crystals of an Fe–19Cr–16Ni austenitic alloy

(2016) Yoji Mine et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging

(2016) Yoji Mine et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain Measurement of Micrometre-Sized Structures under Tensile Loading by Using Scanning White-Light Interferometry

(2016) Takashi Ito et al.   MATERIALS TRANSACTIONS

Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile testing

(2016) Yoji Mine et al.   SCRIPTA MATERIALIA

Deformation of lamellar TiAl alloys by longitudinal twinning

(2016) Thomas Edward James Edwards et al.   SCRIPTA MATERIALIA

Critical grain size to limit the hydrogen-induced ductility drop in a metastable austenitic steel

(2015) Arnaud Macadre et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

High-pressure torsion of metastable austenitic stainless steel at moderate temperatures

(2015) Yoji Mine et al.   PHILOSOPHICAL MAGAZINE LETTERS

Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics

(2014) Zhe Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Modeling fatigue crack growth resistance of nanocrystalline alloys

(2013) Piyas B. Chowdhury et al.   ACTA MATERIALIA

Effect of strain-induced martensite on hydrogen embrittlement of austenitic stainless steels investigated by combined tension and hydrogen release methods

(2013) Lin Zhang et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Effect of Grain Size on Thermal and Mechanical Stability of Austenite in Metastable Austenitic Stainless Steel

(2013) Yoshikazu Matsuoka et al.   ISIJ INTERNATIONAL

Yield point elongation in fine-grained titanium

(2013) Zhiming Li et al.   MATERIALS LETTERS

Plastic anisotropy and associated deformation mechanisms in nanotwinned metals

(2012) Zesheng You et al.   ACTA MATERIALIA

Twinning and martensite in a 304 austenitic stainless steel

(2012) Y.F. Shen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Micro-tension behaviour of lath martensite structures of carbon steel

(2012) Yoji Mine et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hydrogen Effects on Ultrafine-Grained Steels Processed by High-Pressure Torsion

(2012) Yoji Mine et al.   MATERIALS TRANSACTIONS

Strengthening austenitic steels by using nanotwinned austenitic grains

(2012) K. Lu et al.   SCRIPTA MATERIALIA

Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles

(2011) F.K. Yan et al.   ACTA MATERIALIA

Hydrogen uptake in austenitic stainless steels by exposure to gaseous hydrogen and its effect on tensile deformation

(2011) Yoji Mine et al.   CORROSION SCIENCE

Nanomechanical insights into the deformation behavior of austenitic alloys with different stacking fault energies and austenitic stability

(2011) R.D.K. Misra et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Roles of grain boundaries in improving fracture toughness of ultrafine-grained metals

(2011) T. Shimokawa et al.   PHYSICAL REVIEW B

Deformation twinning in nanocrystalline materials

(2011) Y.T. Zhu et al.   PROGRESS IN MATERIALS SCIENCE

Dislocation–twin interactions in nanocrystalline fcc metals

(2010) Y.T. Zhu et al.   ACTA MATERIALIA

Effect of hydrogen on tensile behaviour of micrometre-sized specimen fabricated from a metastable austenitic stainless steel

(2010) Yoji Mine et al.   CORROSION SCIENCE

On the physical differences between tensile testing of type 304 and 316 austenitic stainless steels with internal hydrogen and in external hydrogen

(2010) C. San Marchi et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

(2010) S. Scheriau et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nano-grain evolution in austenitic stainless steel during multi-directional forging

(2010) Y. Nakao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of High-Pressure Torsion Processing and Annealing on Hydrogen Embrittlement of Type 304 Metastable Austenitic Stainless Steel

(2010) Yoji Mine et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Hydrogen on Tensile Properties of Ultrafine-Grained Type 310S Austenitic Stainless Steel Processed by High-Pressure Torsion

(2010) Yoji Mine et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of hydrogen on martensite formation in austenitic stainless steels in high-pressure torsion

(2009) Yoji Mine et al.   ACTA MATERIALIA

Effect of high-pressure torsion on hydrogen trapping in Fe–0.01mass% C and type 310S austenitic stainless steel

(2009) Yoji Mine et al.   ACTA MATERIALIA

Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels

(2009) Nobuo Nakada et al.   ACTA MATERIALIA

Hydrogen Delayed Fracture Properties and Internal Hydrogen Behavior of a Fe–18Mn–1.5Al–0.6C TWIP Steel

(2009) Kyoung Ho So et al.   ISIJ INTERNATIONAL

Recent developments in stainless steels

(2009) K.H. Lo et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

(2009) K. Lu et al.   SCIENCE

Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals

(2008) Z.-H. Jin et al.   ACTA MATERIALIA

Effects of hydrogen on fatigue crack growth behavior of austenitic stainless steels

(2008) T KANEZAKI et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY