Effect of forging temperature on the microstructure, subsequent aging precipitation behavior, and mechanical properties of Mg-Gd-Y-Zr-Ag alloy

Effects of Sm element addition on the workability and microstructure evolution of Mg-Gd-Y-Zr alloy during hot deformation

(2023) Yanbo Pei et al.   MATERIALS & DESIGN

Hydrogen storage performance and phase transformations in as-cast and extruded Mg-Ni-Gd-Y-Zn-Cu alloys

(2023) Hu Yao et al.   Journal of Materials Science & Technology

Effect of strain rate on dynamic recrystallization mechanism of Mg-Gd-Y-Sm-Zr alloy during hot compression

(2023) Yanbo Pei et al.   Journal of Materials Research and Technology-JMR&T

Kinetics of the hydrogen absorption and desorption processes of hydrogen storage alloys: A review

(2022) Qian Li et al.   International Journal of Minerals Metallurgy and Materials

Magnesium-Based Materials for Energy Conversion and Storage

(2022) Qian Li et al.   Journal of Magnesium and Alloys

Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength–ductility synergy

(2022) Shuaishuai Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Improved mechanical performance of double-pass extruded Mg-Gd-Er-Zr alloys with various rare earth contents

(2022) Adil Mansoor et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of aging treatment on the microstructure, fracture toughness and fracture behavior of the extruded Mg-7Gd-2Y–1Zn-0.5Zr alloy

(2022) Z.K. Ji et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhancing strength and ductility of low-cost rare earth Mg-5Y-Ni alloy containing LPSO phase fabricated via multi-pass rolling based on dislocation regulation and grain refinement

(2022) Yucheng Zhou et al.   MATERIALS CHARACTERIZATION

Highly improved creep resistance of hot-extruded Mg-0.9Mn-0.5Ce alloy by conventional forging

(2022) Yuxiu Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Achieving high strength-ductility in a wrought Mg–9Gd–3Y–0.5Zr alloy by modifying with minor La addition

(2021) Rui Ma et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Strength-ductility synergy in Mg98.3Y1.3Ni0.4 alloy processed by high temperature homogenization and rolling

(2021) Yucheng Zhou et al.   SCRIPTA MATERIALIA

Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy

(2021) Qian Zhang et al.   Journal of Materials Research and Technology-JMR&T

Thermodynamics and kinetics of hydriding and dehydriding reactions in Mg-based hydrogen storage materials

(2021) Qian Li et al.   Journal of Magnesium and Alloys

High strength and ductility Mg-8Gd-3Y-0.5Zr alloy with bimodal structure and nano-precipitates

(2020) Xiaoxiao Wei et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review

(2020) Qun Luo et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Mechanical properties and deformation mechanisms of a novel fine-grained Mg-Gd-Y-Ag-Zr-Ce alloy with high strength-ductility synergy

(2020) Xiaofei Cui et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Constitutive modeling of flow behavior and processing maps of Mg–8.1 Gd–4.5Y–0.3Zr alloy

(2020) Xiangsheng Xia et al.   Journal of Magnesium and Alloys

Quasi-in-situ observing the rare earth texture evolution in an extruded Mg-Zn-Gd alloy with bimodal microstructure

(2020) M.G. Jiang et al.   Journal of Magnesium and Alloys

Anti-phase boundary energy of β series precipitates in Mg-Y-Nd system

(2020) Yanlin Guo et al.   SCRIPTA MATERIALIA

Achieving exceptionally high strength in binary Mg-13Gd alloy by strong texture and substantial precipitates

(2020) R.G. Li et al.   SCRIPTA MATERIALIA

Dislocations-induced precipitates and their effect on mechanical properties of Mg-Gd-Y-Zr alloy

(2019) Chao You et al.   Journal of Magnesium and Alloys

Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloy

(2019) Ning Mo et al.   ACTA MATERIALIA

Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases

(2018) N. Tahreen et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

A 12R long-period stacking-ordered structure in a Mg-Ni-Y alloy

(2018) Cheng Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion

(2018) Yousf Islem Bourezg et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials

(2018) Ke Huang et al.   PROGRESS IN MATERIALS SCIENCE

A detailed HAADF-STEM study of precipitate evolution in Mg–Gd alloy

(2018) Yu Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure evolution and mechanical properties of a high strength Mg-11.7Gd-4.9Y-0.3Zr (wt%) alloy prepared by pre-deformation annealing, hot extrusion and ageing

(2017) Zijian Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution and mechanical properties of Mg-Gd-Y-Ag-Zr alloy fabricated by multidirectional forging and ageing treatment

(2017) Bizheng Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Insight into the kinetic mechanism of the first-step dehydrogenation of Mg(AlH 4 ) 2

(2017) Yuepeng Pang et al.   SCRIPTA MATERIALIA

Temperature effects on the mobility of pyramidal < c + a > dislocations in magnesium

(2017) Haidong Fan et al.   SCRIPTA MATERIALIA

Experimental investigation and thermodynamic calculation of the Mg–Ni–Y system (Y

(2015) Zhaolong Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Dynamic precipitation in a Mg–Gd–Y–Zr alloy during hot compression

(2015) Hongchao Xiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and mechanical properties of high performance Mg–6Gd–3Y–2Nd–0.4Zr alloy by indirect extrusion and aging treatment

(2014) Xuan Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite

(2012) Kunkun Deng et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The effect of grain size on the tensile and creep properties of Mg–2.6Nd–0.35Zn–xZr alloys at 250°C

(2012) Z.L. Ning et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation and Hardening in Magnesium Alloys

(2012) Jian-Feng Nie   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals

(2011) Adrien Chapuis et al.   ACTA MATERIALIA

Crystal plasticity analysis of texture development in magnesium alloy during extrusion

(2011) Tsuyoshi Mayama et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Microstructure and mechanical properties of Mg –2Gd –3Y –0.6Zr alloy upon conventional and hydrostatic extrusion

(2011) X. Li et al.   MATERIALS LETTERS

Improvement of fatigue properties by shot peening for Mg–10Gd–3Y alloys under different conditions

(2011) W.C. Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing

(2011) R.G. Li et al.   SCRIPTA MATERIALIA

Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy

(2010) Qudong Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hot compression deformation behavior and processing parameters of a cast Mg–Gd–Y–Zr alloy

(2010) Li Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correlation with Active Slip Modes

(2010) Y. B. Chun et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals

(2010) W.B. Hutchinson et al.   SCRIPTA MATERIALIA

Microstructure and mechanical properties of rolled Mg-12Gd-3Y-0.4Zr alloy sheets

(2010) Rong WANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Particle effects on recrystallization in magnesium–manganese alloys: Particle-stimulated nucleation

(2009) J.D. Robson et al.   ACTA MATERIALIA

Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: In situ neutron diffraction and EPSC modelling

(2008) O. Muránsky et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING