Effects of Sm element addition on the workability and microstructure evolution of Mg-Gd-Y-Zr alloy during hot deformation
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effects of Sm element addition on the workability and microstructure evolution of Mg-Gd-Y-Zr alloy during hot deformation
Authors
Keywords
-
Journal
MATERIALS & DESIGN
Volume 230, Issue -, Pages 111962
Publisher
Elsevier BV
Online
2023-04-28
DOI
10.1016/j.matdes.2023.111962
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Prediction of True Stress at Hot Deformation of High Manganese Steel by Artificial Neural Network Modeling
- (2023) Alexander Yu. Churyumov et al. Materials
- {10–12} twinning relationship in Mg-Gd-Y(-Sn)-Zr alloys under uniaxial compression at room temperature
- (2022) Qian Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of Gd on the recrystallisation, texture and mechanical properties of Mg alloy
- (2022) Jun Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of grain size on the yield stress and microscopic mechanism of a near-α titanium alloy during non-superplastic hot deformation
- (2022) Jie Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior and microstructure evolution of Mg-Gd-Y(-Sm)-Zr alloys
- (2022) Hao Pang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Solid state recycling of Mg–Gd–Y–Zn–Zr alloy chips by isothermal sintering and equal channel angular pressing
- (2022) Yanbo Pei et al. Journal of Magnesium and Alloys
- Investigation of hot extruded GW84 alloy on high temperature tensile properties and microstructure evolution
- (2021) Lipeng Yan et al. Journal of Materials Research and Technology-JMR&T
- Effect of thermo-mechanical processing parameters on the dynamic restoration mechanism in an Mg-4Y-2Nd-1Sm-0.5Zr alloy during hot compression
- (2021) Yunwei Gui et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression
- (2021) Qian Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior and dynamic precipitation characteristics of Mg-Gd-Nd(-Sm)-Zr alloys
- (2021) Ziyi Chen et al. Journal of Materials Research and Technology-JMR&T
- Microstructure Evolution and Dynamic Precipitation Behavior of Mg–10Gd–4Y–1Sm–0.5Zr Alloy During Backward Hot Extrusion
- (2020) L. P. Yan et al. METALS AND MATERIALS INTERNATIONAL
- Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review
- (2020) Qun Luo et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation
- (2020) Yonggang Sun et al. MATERIALS CHARACTERIZATION
- Hot deformation characteristics and dynamic recrystallization mechanisms of a Co–Ni-based superalloy
- (2020) Lingxiao Ouyang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Ag Addition on the Hot Deformation, Constitutive Equations and Processing Maps of a Hot Extruded Mg-Gd-Y Alloy
- (2020) A. Rezaei et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Constitutive modeling of flow behavior and processing maps of Mg–8.1 Gd–4.5Y–0.3Zr alloy
- (2020) Xiangsheng Xia et al. Journal of Magnesium and Alloys
- Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg–9.80Gd–3.78Y–1.12Sm–0.48Zr alloy
- (2020) Yunwei Gui et al. Journal of Magnesium and Alloys
- Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys
- (2020) B.N. Du et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Anti-phase boundary energy of β series precipitates in Mg-Y-Nd system
- (2020) Yanlin Guo et al. SCRIPTA MATERIALIA
- Microstructure and mechanical properties of Mg-Gd-Y-Sm-Al alloy and analysis of grain refinement and strengthening mechanism
- (2019) Xiaoya Chen et al. JOURNAL OF RARE EARTHS
- Effects of thermomechanical processing on the microstructure, texture and mechanical properties of a Mg-Gd-based alloy
- (2019) Changping Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration
- (2019) Qiuyan Huang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effects of accumulative rolling reduction on the microstructure characteristic and mechanical properties of Mg-Gd-Y-Zn-Zr sheets processed by hot rolling
- (2019) Bing Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Re-recognition of the aging precipitation behavior in the Mg–Sm binary alloy
- (2019) Hongbo Xie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature
- (2019) Yu Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion
- (2018) M.G. Jiang et al. ACTA MATERIALIA
- Dynamic recrystallization behavior and microstructural evolution of Mg alloy AZ31 through high-speed rolling
- (2018) Jeong Hun Lee et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Anomalous effects of strain rate on the room-temperature ductility of a cast Mg-Gd-Y-Zr alloy
- (2018) J.L. Li et al. ACTA MATERIALIA
- Hot deformation behavior and processing workability of a Ni-based alloy
- (2018) Zhipeng Wan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy during equal channel angular pressing
- (2018) Bing Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy
- (2017) R. Alizadeh et al. JOURNAL OF MATERIALS SCIENCE
- Constitutive Analysis and Hot Deformation Behavior of Fine-Grained Mg-Gd-Y-Zr Alloys
- (2017) R. Alizadeh et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Evolution of LPSO Phases and Their Effect on Dynamic Recrystallization in a Mg-Gd-Y-Zn-Zr Alloy
- (2017) Xiao-jie Zhou et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy
- (2016) S.S. Satheesh Kumar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Enhanced mechanical properties and rolling formability of fine-grained Mg–Gd–Zn–Zr alloy produced by equal-channel angular pressing
- (2015) Fumin Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dynamic precipitation in a Mg–Gd–Y–Zr alloy during hot compression
- (2015) Hongchao Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions
- (2014) M. Bugnet et al. ACTA MATERIALIA
- First-principles study of generalized-stacking-fault (GSF) energy in Mg with Al and Zn alloyings
- (2013) Cheng Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The effects of grain size on the hot deformation and processing map for 7075 aluminum alloy
- (2013) Yongbiao Yang et al. MATERIALS & DESIGN
- Dynamic recrystallization behavior and hot workability of Mg–2.0Zn–0.3Zr–0.9Y alloy by using hot compression test
- (2013) Bin-Jiang Lv et al. MATERIALS & DESIGN
- Hot deformation and processing maps of as-extruded Mg–9.8Gd–2.7Y–0.4Zr Mg alloy
- (2013) H. Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation
- (2013) Yu Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of doping atoms on the generalized stacking-fault energies of Mg alloys from first-principles calculations
- (2013) Cheng Wang et al. SCRIPTA MATERIALIA
- A study of the heterogeneity of plastic deformation in IF steel by EBSD
- (2012) Nathalie Allain-Bonasso et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture development in friction stir welds
- (2011) R W Fonda et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of plastic deformation on precipitation behavior and tensile fracture behavior of Mg-Gd-Y-Zr alloy
- (2011) Dan LIN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
- (2010) S. Sandlöbes et al. ACTA MATERIALIA
- Hot compression deformation behavior and processing parameters of a cast Mg–Gd–Y–Zr alloy
- (2010) Li Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation
- (2009) S.W. Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Sm on the microstructure, mechanical properties and creep behavior of Mg–0.5Zn–0.4Zr based alloys
- (2009) Jiang Zheng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: Anisotropy of hot workability
- (2007) Y.V.R.K. Prasad et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now