Ultra-high strength Mg-9Gd-4Y-0.5Zr alloy with bi-modal structure processed by traditional extrusion

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

(2016) Xiaopei Li et al.   SCRIPTA MATERIALIA

High ductility of a bi-modal Mg-7wt.%Y alloy at low temperature prepared by high pressure boriding and semi-solid extrusion

(2016) Hui Fu et al.   MATERIALS & DESIGN

Texture enhancement during grain growth of magnesium alloy AZ31B

(2015) J.J. Bhattacharyya et al.   ACTA MATERIALIA

Effect of duplex grain size distributions on long term stress-rupture life at 600°C/450MPa of Nimonic 80A

(2015) Yulai Xu et al.   MATERIALS & DESIGN

Improving the plasticity and strength of Fe–Nb–B ultrafine eutectic composite

(2015) Jeong Tae Kim et al.   MATERIALS & DESIGN

Effect of intermediate annealing on the microstructure and mechanical property of ZK60 magnesium alloy produced by twin roll casting and hot rolling

(2015) Hongmei Chen et al.   MATERIALS CHARACTERIZATION

Improving strength and ductility of Mg–Gd–Y–Zn–Zr alloy simultaneously via extrusion, hot rolling and ageing

(2015) Chao Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Significantly enhanced the ductility of the fine-grained Al–Zn–Mg–Cu alloy by strain-induced precipitation

(2015) Yujing Lang et al.   MATERIALS & DESIGN

Bi-modally structured pure aluminum for enhanced strength and ductility

(2015) Amal M.K. Esawi et al.   MATERIALS & DESIGN

The effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part

(2014) Javad Rajabi et al.   MATERIALS & DESIGN

High yield strength bulk Ti based bimodal ultrafine eutectic composites with enhanced plasticity

(2014) Dinesh K. Misra et al.   MATERIALS & DESIGN

Effects of Gd concentration on microstructure, texture and tensile properties of Mg–Zn–Gd alloys subjected to large strain hot rolling

(2014) Jun Luo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and mechanical properties of high performance Mg–6Gd–3Y–2Nd–0.4Zr alloy by indirect extrusion and aging treatment

(2014) Xuan Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strength enhancement of Mg–3Gd–1Zn alloy by cold rolling

(2013) Di WU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructure and strengthening mechanism of a thermomechanically treated Mg–10Gd–3Y–1Sn–0.5Zr alloy

(2012) L. Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and properties of Mg-12Gd-3Y-0.5Zr alloys processed by ECAP and extrusion

(2011) Rong Zhu et al.   JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION

Enhancement of ductility in high strength Mg-Gd-Y-Zr alloy

(2011) Lei GAO et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression

(2010) Tao Peng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and strengthening mechanisms of a cast Mg–1.48Gd–1.13Y–0.16Zr (at.%) alloy

(2009) L. Gao et al.   JOURNAL OF MATERIALS SCIENCE

Investigation of aluminum-based nanocomposites with ultra-high strength

(2009) Y. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING