Optimization of key quality indicators in material extrusion 3D printing of acrylonitrile butadiene styrene: The impact of critical process control parameters on the surface roughness, dimensional accuracy, and porosity

Key parameters controlling surface quality and dimensional accuracy: a critical review of FFF process

(2022) John Kechagias et al.   MATERIALS AND MANUFACTURING PROCESSES

The effects of FFF 3D printing parameters on energy consumption

(2022) N. Vidakis et al.   MATERIALS AND MANUFACTURING PROCESSES

A multi-parametric process evaluation of the mechanical response of PLA in FFF 3D printing

(2022) J. D. Kechagias et al.   MATERIALS AND MANUFACTURING PROCESSES

Eliminating voids and reducing mechanical anisotropy in fused filament fabrication parts by adjusting the filament extrusion rate

(2022) Jafar Ghorbani et al.   Journal of Manufacturing Processes

Quality Control in 3D Printing: Accuracy Analysis of 3D-Printed Models of Patient-Specific Anatomy

(2021) Bernhard Dorweiler et al.   Materials

Gaining a better understanding of the extrusion process in fused filament fabrication 3D printing: a review

(2021) Bahaa Shaqour et al.   The International Journal of Advanced Manufacturing Technology

Void reduction in fused filament fabrication (FFF) through in situ nozzle-integrated compression rolling of deposited filaments

(2021) Darshan Ravoori et al.   Virtual and Physical Prototyping

A review on voids of 3D printed parts by fused filament fabrication

(2021) Yubo Tao et al.   Journal of Materials Research and Technology-JMR&T

Mechanical and Electrical Properties Investigation of 3D-Printed Acrylonitrile–Butadiene–Styrene Graphene and Carbon Nanocomposites

(2020) N. Vidakis et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes

(2020) Nectarios Vidakis et al.   Sustainability

Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing

(2020) Ahmed Elkaseer et al.   Applied Sciences-Basel

Mechanical Properties of 3D-Printed Acrylonitrile–Butadiene–Styrene TiO2 and ATO Nanocomposites

(2020) Nectarios Vidakis et al.   Polymers

The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites

(2020) Nectarios Vidakis et al.   Micromachines

Morphology and mechanical properties of poly (acrylonitrile‐butadiene‐styrene)/multi‐walled carbon nanotubes nanocomposite specimens prepared by fused deposition modeling

(2020) Mohammad Razavi‐Nouri et al.   POLYMER COMPOSITES

Effects of porosity on the mechanical properties of additively manufactured components: a critical review

(2020) Ahmad Y Al-Maharma et al.   Materials Research Express

Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts

(2019) Sunpreet Singh et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Energy consumption optimization with geometric accuracy consideration for fused filament fabrication processes

(2019) Wenmeng Tian et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Surface roughness of 3D printed materials: Comparing physical measurements and human perception

(2019) Jess Hartcher-O’Brien et al.   Materials Today Communications

Improving the forming quality of fused filament fabrication parts by applied vibration

(2019) Shijie Jiang et al.   RAPID PROTOTYPING JOURNAL

Materials with enhanced adhesive properties based on acrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF)

(2019) A.S. de León et al.   MATERIALS & DESIGN

Acrylonitrile Butadiene Styrene and Polypropylene Blend with Enhanced Thermal and Mechanical Properties for Fused Filament Fabrication

(2019) Muhammad Harris et al.   Materials

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

(2018) Tuan D. Ngo et al.   COMPOSITES PART B-ENGINEERING

Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament

(2018) Bai Huang et al.   POLYMER ENGINEERING AND SCIENCE

Dimensional metrology with X-ray CT: A comparison with CMM measurements on internal features and compliant structures

(2018) Herminso Villarraga-Gómez et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Quality control issues in 3D-printing manufacturing: a review

(2018) Hsin-Chieh Wu et al.   RAPID PROTOTYPING JOURNAL

Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process

(2018) Nahal Aliheidari et al.   MATERIALS & DESIGN

Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method

(2018) Ala’aldin Alafaghani et al.   Journal of Manufacturing Processes

A study of parametric calibration for low cost 3D printing: Seeking improvement in dimensional quality

(2017) Leonardo Santana et al.   MATERIALS & DESIGN

Improved Surface Quality in 3D Printing by Optimizing the Printing Direction

(2016) W. M. Wang et al.   COMPUTER GRAPHICS FORUM

On the Strain Rate Sensitivity of Abs and Abs Plus Fused Deposition Modeling Parts

(2016) A. Vairis et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective

(2016) Hedi Nouri et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Towards in-process x-ray CT for dimensional metrology

(2016) Jason M Warnett et al.   MEASUREMENT SCIENCE and TECHNOLOGY

Factors Affecting Dimensional Accuracy of 3-D Printed Anatomical Structures Derived from CT Data

(2015) Kent M. Ogden et al.   JOURNAL OF DIGITAL IMAGING

Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer

(2015) Garrett W. Melenka et al.   RAPID PROTOTYPING JOURNAL

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

(2015) Brian N. Turner et al.   RAPID PROTOTYPING JOURNAL

Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering

(2014) Arghavan Farzadi et al.   PLoS One