Effect of post-process treatments on mechanical properties and surface characteristics of 3D printed short glass fiber reinforced PLA/TPU using the FDM process
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effect of post-process treatments on mechanical properties and surface characteristics of 3D printed short glass fiber reinforced PLA/TPU using the FDM process
Authors
Keywords
-
Journal
CIRP Journal of Manufacturing Science and Technology
Volume 41, Issue -, Pages 135-143
Publisher
Elsevier BV
Online
2022-12-30
DOI
10.1016/j.cirpj.2022.12.008
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Tensile, three-point bending and impact strength of 3D printed parts using PLA and recycled PLA filaments: A statistical investigation
- (2022) Gurcan Atakok et al. Journal of Materials Research and Technology-JMR&T
- An overview of fused deposition modelling (FDM): research, development and process optimisation
- (2021) Mohammadreza Lalegani Dezaki et al. RAPID PROTOTYPING JOURNAL
- Quality of Surface Texture and Mechanical Properties of PLA and PA-Based Material Reinforced with Carbon Fibers Manufactured by FDM and CFF 3D Printing Technologies
- (2021) Mohd Shahneel Saharudin et al. Polymers
- Influence of Infill Patterns Generated by CAD and FDM 3D Printer on Surface Roughness and Tensile Strength Properties
- (2021) Mohammadreza Lalegani Dezaki et al. Applied Sciences-Basel
- Chemical vapor treatment to improve surface finish of 3D printed polylactic acid (PLA) parts realized by fused filament fabrication
- (2021) Fulvio Lavecchia et al. Progress in Additive Manufacturing
- Effect of heat treatment on mechanical properties of 3D printed PLA
- (2021) N. Jayanth et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties enhancement in composite material structures of poly‐lactic acid/epoxy/milled glass fibers prepared by fused filament fabrication and solution casting
- (2021) Ammar Mustafa et al. POLYMER COMPOSITES
- A Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement
- (2021) Ariadna Chueca de Bruijn et al. Materials
- The Surface Characteristics, Microstructure and Mechanical Properties of PEEK Printed by Fused Deposition Modeling with Different Raster Angles
- (2021) Sasa Gao et al. Polymers
- Enhanced electrical conductivity of polymer nanocomposite based on edge-selectively functionalized graphene nanoplatelets
- (2020) Jaehyun Cho et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends
- (2020) Mohammadreza Nofar et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Surface Treatments with Dichloromethane to Eliminate Printing Lines on Polycarbonate Components Printed by Fused Deposition Modelling Technology
- (2020) Jorge Suárez-Macías et al. Materials
- FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
- (2020) Sachini Wickramasinghe et al. Polymers
- 3D printing technologies: techniques, materials, and post-processing
- (2020) Ilbey Karakurt et al. Current Opinion in Chemical Engineering
- Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers
- (2020) Arit Das et al. Additive Manufacturing
- Properties and role of interfaces in multimaterial 3D printed composites
- (2020) Laura Zorzetto et al. Scientific Reports
- Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts
- (2019) Sunpreet Singh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
- (2019) Zengguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties
- (2019) S.M. Fijul Kabir et al. COMPOSITE STRUCTURES
- Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts
- (2019) Ana P. Valerga Puerta et al. RAPID PROTOTYPING JOURNAL
- Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing
- (2019) Sunil Bhandari et al. Additive Manufacturing
- Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing
- (2018) Radoslaw A. Wach et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Abrasive flow finishing of FDM printed parts using a sustainable media
- (2018) Harlal S. Mali et al. RAPID PROTOTYPING JOURNAL
- Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
- (2017) Jasgurpreet Singh Chohan et al. RAPID PROTOTYPING JOURNAL
- Effect of crystalline forms (α′ and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties
- (2016) T. Tábi et al. EUROPEAN POLYMER JOURNAL
- Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength
- (2016) Ashu Garg et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development of rapid tooling using fused deposition modeling: a review
- (2016) Kamaljit Singh Boparai et al. RAPID PROTOTYPING JOURNAL
- Surface improvement of fused deposition modeling parts by barrel finishing
- (2015) Alberto Boschetto et al. RAPID PROTOTYPING JOURNAL
- The Effect of Mold Temperature on the Performance of Injection Molded Poly(lactic acid)-Based Bioplastic
- (2013) Ryan Vadori et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Five-Axis Machining and Burnishing of Complex Parts for the Improvement of Surface Roughness
- (2011) Luis N. López de Lacalle et al. MATERIALS AND MANUFACTURING PROCESSES
- Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling
- (2010) L.M. Galantucci et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Experimental study aiming to enhance the surface finish of fused deposition modeled parts
- (2009) L.M. Galantucci et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started