Dynamic precipitation and deformation behaviors of a bimodal-grained WE43 alloy with enhanced mechanical properties

Achieving strength and ductility synergy via a nanoscale superlattice precipitate in a cast Mg-Y-Zn-Er alloy

(2023) Mingyu Fan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility

(2023) Mingdi Yu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy

(2022) Zhen-Ming Hua et al.   Materials Research Letters

A rolled Mg−8Al−0.5Zn−0.8Ce alloy with high strength-ductility synergy via engineering high-density low angle boundaries

(2022) Xiao Ma et al.   Journal of Magnesium and Alloys

Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength–ductility synergy

(2022) Shuaishuai Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility

(2022) Zhong-Zheng Jin et al.   Journal of Magnesium and Alloys

α-Mg/LPSO (Long-Period Stacking Ordered) phase interfaces as obstacles against dislocation slip in as-cast Mg-Zn-Y alloys

(2022) Tsuyoshi Mayama et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Superior mechanical properties and deformation mechanisms of a 304 stainless steel plate with gradient nanostructure

(2022) Y.T. Sun et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Characteristics of 〈a〉 screw dislocations and their slip on prismatic and pyramidal planes in pure α titanium from atomistic simulations

(2022) Ali Rida et al.   Materialia

Mechanical properties and deformation mechanism in Mg-Gd alloy laminate with dual-heterostructure grain size and texture

(2022) Shuaishuai Liu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing

(2022) Xinde Huang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy

(2022) Tong Wang et al.   Materials Research Letters

The effect of Zr on dynamic recrystallization during ECAP processing of Mg-Y-RE alloys

(2021) P. Minárik et al.   MATERIALS CHARACTERIZATION

Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles

(2021) Yong-Kang Li et al.   Journal of Magnesium and Alloys

Understanding the enhanced ductility of Mg-Gd with Ca and Zn microalloying by slip trace analysis

(2021) Jun Zhao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy

(2021) Zhen-Ming Hua et al.   SCRIPTA MATERIALIA

Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling

(2021) Yong-Kang Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

On the inhomogeneous deformation behavior of magnesium alloy beam subjected to bending

(2021) Ding Tang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

(2020) Hucheng Pan et al.   ACTA MATERIALIA

Effect of pre-deformation on microstructure and mechanical properties of WE43 magnesium alloy II: Aging at 250 and 300 °C

(2020) Y.H. Kang et al.   Journal of Magnesium and Alloys

Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg–Y sheets

(2020) D.D. Yin et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Improving ductility of a Mg alloy via non-basal slip induced by Ca addition

(2019) Gaoming Zhu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Perspective on hetero-deformation induced (HDI) hardening and back stress

(2019) Yuntian Zhu et al.   Materials Research Letters

Towards high ductility in magnesium alloys - The role of intergranular deformation

(2019) Jie Sun et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling

(2019) Saadi A. Habib et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effect of Zn addition on mechanical and corrosion properties of as-cast and as-extruded WE43 magnesium alloys

(2019) Yasin Subasi et al.   Materials Research Express

Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion

(2018) W.T. Sun et al.   ACTA MATERIALIA

Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis

(2018) C.M. Cepeda-Jiménez et al.   ACTA MATERIALIA

Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE43

(2018) J.J. Bhattacharyya et al.   ACTA MATERIALIA

Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy

(2018) Hailong Jia et al.   ACTA MATERIALIA

Achieving bimodal microstructure and enhanced tensile properties of Mg–9Al–1Zn alloy by tailoring deformation temperature during hard plate rolling (HPR)

(2018) Min Zha et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of secondary phase particles on thermal stability of ultra-fine grained Mg-4Y-3RE alloy prepared by equal channel angular pressing

(2018) Peter Minárik et al.   MATERIALS CHARACTERIZATION

Microstructural evolution and improvement in mechanical properties of extruded AZ31 alloy by combined addition of Ca and Y

(2018) Sang-Hoon Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Increasing strength and ductility of magnesium alloy WE43 by equal-channel angular pressing

(2018) N.S. Martynenko et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of rare earth element segregation on grain boundary energy and mobility in magnesium and ensuing texture weakening

(2018) Christopher D. Barrett et al.   SCRIPTA MATERIALIA

Secondary phase precipitation and thermally stable microstructure refinement induced by ECAP on Mg-Y-Nd (WN43) alloy

(2018) Marcello Cabibbo et al.   MATERIALS LETTERS

Effects of Gd solutes on hardness and yield strength of Mg alloys

(2018) Yuling Xu et al.   Progress in Natural Science-Materials International

The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys

(2018) Hang Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characteristic cyclic plastic deformation in ZK60 magnesium alloy

(2017) Shuai Dong et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effect of pre-deformation on microstructure and mechanical properties of WE43 magnesium alloy

(2017) Y.H. Kang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Exceptional mechanical properties of ultra-fine grain Mg-4Y-3RE alloy processed by ECAP

(2017) Peter Minárik et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation and fracture behavior of Mg alloy, WE43, after various aging heat treatments

(2017) J.J. Bhattacharyya et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr supersaturated solid solution prepared by high pressure torsion

(2017) W.T. Sun et al.   MATERIALS & DESIGN

In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures

(2016) H. Wang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effect of precipitate shape and orientation on Orowan strengthening of non-basal slip modes in hexagonal crystals, application to magnesium alloys

(2016) Fulin Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interfacial segregation induced by severe plastic deformation in a Mg–Zn–Y alloy

(2016) Dudekula Althaf Basha et al.   SCRIPTA MATERIALIA

Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing

(2015) Min Zha et al.   ACTA MATERIALIA

Effect of grain size on slip activity in pure magnesium polycrystals

(2015) C.M. Cepeda-Jiménez et al.   ACTA MATERIALIA

Improvement of corrosion resistance and biocompatibility of rare-earth WE43 magnesium alloy by neodymium self-ion implantation

(2015) Weihong Jin et al.   CORROSION SCIENCE

Strength and ductility optimization of Mg–Y–Nd–Zr alloy by microstructural design

(2015) N. Kumar et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Dislocation locking versus easy glide in titanium and zirconium

(2015) Emmanuel Clouet et al.   NATURE MATERIALS

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

(2015) Xiaolei Wu et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

A simulation study of β 1 precipitation on dislocations in an Mg–rare earth alloy

(2014) H. Liu et al.   ACTA MATERIALIA

Explaining texture weakening and improved formability in magnesium rare earth alloys

(2014) D. Griffiths   MATERIALS SCIENCE AND TECHNOLOGY

In situ neutron diffraction and polycrystal plasticity modeling of a Mg–Y–Nd–Zr alloy: Effects of precipitation on individual deformation mechanisms

(2013) S.R. Agnew et al.   ACTA MATERIALIA

Microstructure and mechanical properties of the hot-rolled Mg–Y–Nd–Zr alloy

(2013) Xiao Wang et al.   JOURNAL OF MATERIALS RESEARCH

Evolution of a honeycomb network of precipitates in a hot-rolled commercial Mg–Y–Nd–Zr alloy

(2013) D. Choudhuri et al.   PHILOSOPHICAL MAGAZINE LETTERS

Static recrystallization and mechanical properties of Mg–4Y–3RE magnesium alloy sheet processed by differential speed rolling at 823K

(2012) Xinsheng Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation and Hardening in Magnesium Alloys

(2012) Jian-Feng Nie   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The ignition temperature of Mg alloys WE43, AZ31 and AZ91

(2011) Ming Liu et al.   CORROSION SCIENCE

Biocorrosion properties of as-extruded Mg–Nd–Zn–Zr alloy compared with commercial AZ31 and WE43 alloys

(2011) Xiaobo Zhang et al.   MATERIALS LETTERS

Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy

(2011) W. Yuan et al.   SCRIPTA MATERIALIA

Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys

(2009) L. Gao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of T5 and T6 Tempers on a Hot-Rolled WE43 Magnesium Alloy

(2008) Kun Yu et al.   MATERIALS TRANSACTIONS

Strain hardening behaviour and the Taylor factor of pure magnesium

(2008) C.H. Cáceres et al.   PHILOSOPHICAL MAGAZINE

Review on Research and Development of Magnesium Alloys

(2008) Z YANG et al.   Acta Metallurgica Sinica-English Letters