Comparative study of the current-carrying tribological properties of carbon graphite composites with different hardnesses

Influence of Electric Current on the Temperature Rise and Wear Mechanism of Copper–Graphite Current-Carrying Friction Pair

(2022) Yuankai Zhou et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

On the Electric Contact Resistance

(2022) B. N. J. Persson   TRIBOLOGY LETTERS

Mechanical properties and wear resistance of direct energy deposited Fe–12Mn–5Cr–1Ni-0.4C steel deposited on spheroidal graphite cast iron

(2022) Young Keun Park et al.   Journal of Materials Research and Technology-JMR&T

Progress on Current-Carry Friction and Wear: An Overview from Measurements to Mechanism

(2022) Shuaibing Li et al.   Coatings

The current-carrying tribological properties of Cu/Graphene composites

(2021) Jing Zhao et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Effect of Rotation Speed on the Tribological and Conductive Behaviors of Rolling Current-Carrying Cu Pairs

(2021) Jiawei Li et al.   MATERIALS TRANSACTIONS

Experimental study on wear properties of wheel and rail materials with different hardness values

(2021) Y. Hu et al.   WEAR

Graphite Lubrication Mechanisms Under High Mechanical Load

(2021) C.E. Morstein et al.   WEAR

Effect of copper contents on the current-carrying wear properties of carbon brush under different temperatures conditions

(2021) Xinlong Liu et al.   Journal of Materials Research and Technology-JMR&T

Wear of Thin Coatings with Different Hardness by Probe Methods

(2020) V. A. Lapitskaya et al.   Journal of Surface Investigation-X-Ray Synchrotron and Neutron Techniques

Friction and wear properties of high temperature and low temperature sintered copper-graphite brushes at different ambient temperatures

(2020) Rutie Liu et al.   Journal of Materials Research and Technology-JMR&T

Amorphous carbon films doped with silver and chromium to achieve ultra-low interfacial electrical resistance and long-term durability in the application of proton exchange membrane fuel cells

(2019) Di Zhang et al.   CARBON

Effect of polarity and various contact pairing combinations of electrographite, polymer-bonded graphite and copper on the performance of sliding electrical contacts

(2019) Dejan Poljanec et al.   WEAR

Investigation of the influence of rail hardness on the wear of rail and wheel materials under dry conditions (ICRI wear mapping project)

(2019) R. Lewis et al.   WEAR

Superior mechanical properties of sulfonated graphene reinforced carbon-graphite composites

(2019) Chuanjun Tu et al.   CARBON

Dynamic changes of mechanical properties induced by friction in the Archard wear model

(2019) Yanfei Liu et al.   WEAR

Damage models of different hardness layers subjected to point contact

(2019) A. Trausmuth et al.   WEAR

Numerical prediction of tensile yield strength and micro hardness of Ti6Al4V alloy processed by constrained bending and straightening severe plastic deformation

(2019) Wambura Mwiryenyi Mwita et al.   Materials Research Express

Influence of reciprocating distance on the delamination wear of the carbon strip in pantograph–catenary system at high sliding-speed with strong electrical current

(2019) Hongjuan Yang et al.   ENGINEERING FAILURE ANALYSIS

Current density effect on current-carrying friction of amorphous carbon film

(2019) Kun Sun et al.   CARBON

Oxidation of polycrystalline copper films – Pressure and temperature dependence

(2018) Björn Maack et al.   THIN SOLID FILMS

Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

(2018) Martina Grandin et al.   TRIBOLOGY INTERNATIONAL

Erosive wear resistance evaluation with the hardness after strain-hardening and its application for a high-entropy alloy

(2018) Xiulin Ji et al.   WEAR

Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

(2018) M. Grandin et al.   WEAR

Three-body abrasive wear of hard coatings: Effects of hardness and roughness

(2018) Reza Gheisari et al.   THIN SOLID FILMS

Wear mechanisms and hardness thresholds under repeated impact contact loading

(2017) XiangHong Ren et al.   Science China-Technological Sciences

Effect of hardness, microstructure, normal load and abrasive size on friction and on wear behaviour of 35NCD16 steel

(2017) Céline Trevisiol et al.   WEAR

Effect of Speed on the Tribological Behavior of Fe–Cu–C Based Self Lubricating Composite

(2017) Sanjay Mohan Sharma et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

The effect of hardness distribution by carburizing on the elastic–plastic contact performance

(2016) Sheng-guang Zhang et al.   TRIBOLOGY INTERNATIONAL

On the Applicability of Miner’s Rule to Adhesive Wear

(2016) Saleh Akbarzadeh et al.   TRIBOLOGY LETTERS

Optimization of hardness ratio in rail–wheel friction pair

(2015) A. A. Razhkovskiy et al.   Journal of Friction and Wear

The influence of surface hardness on the fretting wear of steel pairs—Its role in debris retention in the contact

(2015) J.D. Lemm et al.   TRIBOLOGY INTERNATIONAL

Abrasive wear behavior of TiCN cermets under water-based slurries with different abrasives

(2013) Xiaoyong Ren et al.   TRIBOLOGY INTERNATIONAL

Size and load dependence of nanoscale electric contact resistance

(2013) Zhijiang Ye et al.   TRIBOLOGY INTERNATIONAL

Effect of hardness differential on metal-to-metal fretting damage

(2013) Kenneth G. Budinski   WEAR

The nature of friction: A critical assessment

(2013) Stephen Hsu et al.   Friction

Rail grade selection and friction management: a combined approach for optimising rail–wheel contact

(2012) R. Stock et al.   IRONMAKING & STEELMAKING

Effect of electrical current on tribological behavior of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy

(2012) Y.A. Wang et al.   TRIBOLOGY INTERNATIONAL

Towards the theory of hardness of materials

(2010) A. R. Oganov et al.   Journal of Superhard Materials

Sliding wear of weld layers with application to cane mill shaft rebuilding

(2010) J J Coronado et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding

(2010) Pradeep L. Menezes et al.   TRIBOLOGY LETTERS

Effect of Sliding Speed on Surface Modification and Tribological Behavior of Copper–Graphite Composite

(2010) Wenlin Ma et al.   TRIBOLOGY LETTERS

Influence of the spring stiffness on friction and wear behaviours of stainless steel/copper-impregnated metallized carbon couple with electrical current

(2009) T. Ding et al.   WEAR

Correlation of Yield Strength and Tensile Strength with Hardness for Steels

(2008) E.J. Pavlina et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE