Characterization of bulk metallic glasses by microscratch test under Rockwell C diamond indenter and progressive normal load

Influence of sliding velocity on microscratch response of carbohydrate polymers by Berkovich indenter

(2022) Ming Liu et al.   POLYMER TESTING

Understanding of fracture conditions and material response in a model TiN film/stainless steel substrate system – A cross-sectional scratch test study

(2022) Guizhi Wu et al.   SURFACE & COATINGS TECHNOLOGY

Damage behavior and removal mechanism of different yarn orientations 2.5D SiCf/SiC composites under single-abrasive scratch test

(2022) Zikang Zhang et al.   CERAMICS INTERNATIONAL

Determination of the fracture energy of rocks from size effect tests: Application to shales and carbonate rocks

(2022) Gilles Pijaudier-Cabot et al.   ENGINEERING FRACTURE MECHANICS

Scratch-induced deformation and damage behavior of doped diamond-like carbon films under progressive normal load of Vickers indenter

(2022) Ming Liu et al.   THIN SOLID FILMS

Micro-fracture behavior of a single-aggregated cBN grain and its relation to material removal in high-speed grinding of Ti–6Al–4V alloys

(2022) Biao Zhao et al.   Journal of Manufacturing Processes

Micromechanical properties of Dy3+ ion-doped (Lu Y1-)3Al5O12 (x = 0, 1/3, 1/2) single crystals by indentation and scratch tests

(2022) Ming Liu et al.   CERAMICS INTERNATIONAL

An experimental investigation of brittle failure mechanisms in scratch tests of rock

(2022) He Zhang et al.   ENGINEERING FRACTURE MECHANICS

Analysis of crack initiation load and stress field in double scratching of single crystal gallium nitride

(2022) Qianqing Jiang et al.   ENGINEERING FRACTURE MECHANICS

Comparison of shale fracture toughness obtained from scratch test and nanoindentation test

(2022) Kouqi Liu et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Effect of thermal ageing on the scratch resistance of natural-fibre-reinforced epoxy composites

(2021) Solomon Ugochukwu et al.   COMPOSITE STRUCTURES

Multi-phase modeling of SiC particle removal mechanism in ultrasonic vibration–assisted scratching of SiCp/Al composites

(2021) Wei Zheng et al.   The International Journal of Advanced Manufacturing Technology

Study of wear performance and tribological characterization of AlTiN PVD coatings with different Al/Ti ratios during ultra-high speed turning of stainless steel 304

(2021) Qianxi He et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Corrosion fatigue lifetime assessment of high-speed railway axle EA4T steel with artificial scratch

(2021) Yanan Hu et al.   ENGINEERING FRACTURE MECHANICS

Strengthening mechanism of fracture properties by nano materials for cementitious materials subject to early-age frost attack

(2021) Ya Wei et al.   CEMENT & CONCRETE COMPOSITES

Towards understanding the scratchability in functional glasses

(2021) S. Kasimuthumaniyan et al.   CERAMICS INTERNATIONAL

In situ study on the bending strain field of a Zr-based bulk metallic glass with notch

(2021) Lunyong Zhang et al.   MATERIALS CHARACTERIZATION

Improving the tribological performances of PDA + PTFE nanocomposite coatings by hot compaction

(2021) Sujan K Ghosh et al.   TRIBOLOGY TRANSACTIONS

Micromechanical and microstructure characterization of BaO-Sm2O3–5TiO2 ceramic with addition of Al2O3

(2021) Ming Liu et al.   CERAMICS INTERNATIONAL

Study on the Adhesion Properties of Graphene and Hexagonal Boron Nitride Monolayers in Multilayered Micro-devices by Scratch Adhesion Test

(2021) Evgeni Ivanov et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Theoretical modeling and experimental analysis of single-grain scratching mechanism of fused quartz glass

(2021) Bin Lin et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Tribological characteristics of Ti-based bulk metallic glass via deep cryogenic-cycling treatment

(2021) Qian Jia et al.   MATERIALS CHARACTERIZATION

Influence of Sample Tilt and Applied Load on Microscratch Behavior of Copper Under a Spherical Diamond Indenter

(2021) Ming Liu   TRIBOLOGY LETTERS

Acoustic Emission Characterization of Transgranular Cracks in WC–Co Cemented Carbides During a One-way Scratch

(2021) M. Yahiaoui et al.   TRIBOLOGY LETTERS

Bending fatigue behavior of thin Zr61Ti2Cu25Al12 bulk metallic glass beams for compliant mechanisms application

(2021) Diao-Feng Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter

(2021) Weihai Huang et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Size Effect of CeO2 Particle on Nanoscale Single-Asperity Sliding Friction

(2021) Ning Xu et al.   TRIBOLOGY LETTERS

Comparison of Microscratch Responses of Metals Between Berkovich and Rockwell C Indenters Under Progressive Normal Force

(2021) Ming Liu et al.   TRIBOLOGY LETTERS

Critical bending load of CFRP panel with shallow surface scratch determined by a tensile strength model

(2020) Bingyan Yuan et al.   COMPOSITES SCIENCE AND TECHNOLOGY

New FeNiCrMo(P, C, B) high-entropy bulk metallic glasses with unusual thermal stability and corrosion resistance

(2020) Yanhui Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Experimental and Numerical Investigation on the Effect of Scratch Direction on Material Removal and Friction Characteristic in BK7 Scratching

(2020) Wei Wang et al.   Materials

Shear punching of bulk metallic glasses under low stress

(2020) Fei Sun et al.   MATERIALS & DESIGN

High-strength and ductile ultrafine-grained Al–Y–Ni–Co alloy for high-temperature applications

(2020) Tianbing He et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Corrosive wear behaviors and mechanisms of a biocompatible Fe-based bulk metallic glass

(2020) Nengbin Hua et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Effect of B4C reinforcement on microstructure, residual stress, toughening and scratch resistance of (Hf, Zr)B2 ceramics

(2020) Shipra Bajpai et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Cold joining to fabricate large size metallic glasses by the ultrasonic vibrations

(2020) Xin Li et al.   SCRIPTA MATERIALIA

Basic creep and fracture response of fine recycled aggregate concrete

(2020) Ange-Therese Akono et al.   CONSTRUCTION AND BUILDING MATERIALS

On the shear-affected zone of shear bands in bulk metallic glasses

(2020) Farnaz A. Davani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Ti Content and Annealing on Fracture Toughness and Scratch Resistance of Electroless Ni-P-Ti Coatings

(2020) Zhi Li et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

On the formation of shear bands in a metallic glass under tailored complex stress fields

(2020) S.H. Chen et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Dry wear behavior and mechanism of a Fe-based bulk metallic glass: description by Hertzian contact calculation and finite-element method simulation

(2020) Nengbin Hua et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Investigation of nanomechanical deformation behavior in plasma sprayed Fe-based amorphous/ nanocrystalline composite coating via multi-scale indentation and nanotribology

(2020) Anil Kumar et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Scratch behavior of polycarbonate by Rockwell C diamond indenter under progressive loading

(2020) Ming Liu et al.   POLYMER TESTING

Study on Damage of 4H-SiC Single Crystal through Indentation and Scratch Testing in Micro–Nano Scales

(2020) Peng Chai et al.   Applied Sciences-Basel

Lattice Discrete Particle Modeling of Size Effect in Slab Scratch Tests

(2020) Lin Han et al.   JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME

Microstructure and mechanical properties of Zr55Cu30Al10Ni5 amorphous alloy with high-energy states produced by strip casting

(2020) C.Y. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Corrosion protection of NiNb metallic glass coatings for 316SS by magnetron sputtering

(2020) L. Jiang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

In Situ Micromechanical Characterization of Metallic Glass Microwires under Torsional Loading

(2019) S. Fan et al.   EXPERIMENTAL MECHANICS

Microstructure and Wear Behaviors of Plasma-Sprayed FeCrNiMoCBSi Coating with Nano-Grain Dispersed Amorphous Phase in Reciprocating Sliding Contact

(2019) Baosen Zhang et al.   TRIBOLOGY TRANSACTIONS

Deformation behavior and dominant abrasion micro mechanisms of tempering steel with varying carbon content under controlled scratch testing

(2019) F. Pöhl et al.   WEAR

Experimental Analysis and Wear Prediction Model for Unfilled Polymer–Polymer Sliding Contacts

(2019) Vikram Ramesh et al.   TRIBOLOGY TRANSACTIONS

Contact Area and Shear Stress in Repeated Single-Asperity Sliding of Steel on Polymer

(2019) Xian-Qiang Pei et al.   TRIBOLOGY LETTERS

Summary of the properties and benefits of glass mechanically frosted with an abrasive brush

(2019) Michal Starý et al.   CONSTRUCTION AND BUILDING MATERIALS

Tribological characterization of jaspilite by linear scratch test

(2019) R.V. Magnol et al.   WEAR

A Novel In Situ Experiment to Investigate Wear Mechanisms in Biomaterials

(2019) N. Alderete et al.   EXPERIMENTAL MECHANICS

Scratch‐induced yielding and ductile fracture in silicate glasses probed by nanoindentation

(2019) Shigeki Sawamura et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

An Experimental Study to Reduce the Fracture Pressure of High Strength Rocks Using a Novel Thermochemical Fracturing Approach

(2019) Zeeshan Tariq et al.   GEOFLUIDS

Microstructure and nanomechanical properties of Zr-based bulk metallic glass composites fabricated by laser rapid prototyping

(2019) Hong Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Micro-fracture mechanism of polycrystalline CBN grain during single grain scratching tests based on fractal dimension analysis

(2019) Yejun Zhu et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Scratching-induced surface characteristics and material removal mechanisms in rotary ultrasonic surface machining of CFRP

(2019) Hui Wang et al.   ULTRASONICS

Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites

(2019) M.J.M. Ridzuan et al.   Journal of Materials Research and Technology-JMR&T

Characterization on the yield stress and interfacial coefficient of friction of glasses from scratch tests

(2019) HaiTao Liu et al.   CERAMICS INTERNATIONAL

Transformation of fracture mechanism and damage behavior of ceramic-matrix composites during nano-scratching

(2019) Jie Chen et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Sliding of a diamond sphere on K9 glass under progressive load

(2019) Ming Liu et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Microstructure, mechanical properties and corrosion performance of Fe44Cr15Mo14Co7C10B5Si5 thin film metallic glass deposited by DC magnetron sputtering

(2019) Ali Obeydavi et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Micromechanical characterization of hard phases by means of instrumented indentation and scratch testing

(2019) J. Kimm et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The role of nanoscale strain-induced defects in the sharp increase of low-temperature toughness in low-carbon and low-alloy steels

(2019) V.E. Panin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of scratching speed on phase transformations in high-speed scratching of monocrystalline silicon

(2019) Bing Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Analysis of instrumented scratch hardness and fracture toughness properties of laser surface alloyed tribological coatings

(2018) Debjit Misra et al.   CERAMICS INTERNATIONAL

Friction and fracture characteristics of engineered crumb-rubber concrete at microscopic lengthscale

(2018) Ange-Therese Akono et al.   CONSTRUCTION AND BUILDING MATERIALS

Introducing Heterogeneity into the Micro-Scratch Test Fracture Toughness Relation for Brittle Particle Composites

(2018) S. Al Wakeel et al.   EXPERIMENTAL MECHANICS

Correlations between the wear resistance and properties of bulk metallic glasses

(2018) Zhenlong Liao et al.   INTERMETALLICS

Lateral deformation and defect resistance of compacted silica glass: Quantification of the scratching hardness of brittle glasses

(2018) Shigeki Sawamura et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

On the fracture toughness of bulk metallic glasses under Berkovich nanoindentation

(2018) H. Guo et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Mechanical, electrical and thermal properties of ZrC-ZrB 2 -SiC ternary eutectic composites prepared by arc melting

(2018) Rong Tu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Evolution of structure and mechanical properties of hard yet fracture resistant W‐B‐C coatings with varying C/W ratio

(2018) M. Alishahi et al.   SURFACE & COATINGS TECHNOLOGY

Effect of multi-interfacial structure on fracture resistance of composite TiSiN/Ag/TiSiN multilayer coating

(2018) Chaoqun Dang et al.   THIN SOLID FILMS

Friction and wear of PEEK in continuous sliding and unidirectional scratch tests

(2018) Leyu Lin et al.   TRIBOLOGY INTERNATIONAL

Investigation of nano-scale scratch and stick-slip behaviors of polycarbonate using atomic force microscopy

(2018) Jie Liu et al.   TRIBOLOGY INTERNATIONAL

FEM Modeling on Scratch Behavior of Multiphase Polymeric Systems

(2018) Vijay Kisan Chandelia et al.   TRIBOLOGY LETTERS

Scratching an Al/Si Interface: Molecular Dynamics Study of a Composite Material

(2018) Zhibo Zhang et al.   TRIBOLOGY LETTERS

Suppressing scratch-induced brittle fracture in silicon by geometric design modification of the abrasive grits

(2018) Andrii M. Kovalchenko et al.   Journal of Materials Research and Technology-JMR&T

Effect of annealing induced crystalline evolution on the scratch resistance of polylactide

(2018) Longfei Yi et al.   TRIBOLOGY INTERNATIONAL

Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests

(2018) Yuanchen Li et al.   CERAMICS INTERNATIONAL

An In Situ Method for Simultaneous Friction Measurements and Imaging of Interfacial Tribochemical Film Growth in Lubricated Contacts

(2018) N. N. Gosvami et al.   TRIBOLOGY LETTERS

Effects of Normal Load on the Coefficient of Friction by Microscratch Test of Copper with a Spherical Indenter

(2018) Chenghui Gao et al.   TRIBOLOGY LETTERS

Analytical model of friction behavior during polymer scratching with conical tip

(2018) Chengkai Jiang et al.   Friction

Investigation into nanoscratching mechanical performance of metallic glass multilayers with improved nano-tribological properties

(2018) Qing Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Discussion on the interpretation of scratch tests with size effect law

(2017) Yaneng Zhou   ENGINEERING FRACTURE MECHANICS

Reply to “Discussion on the Fracture mechanics interpretation of the scratch test by Akono et al.”

(2017) Ange-Therese Akono   ENGINEERING FRACTURE MECHANICS

Misinterpretation of friction as fracture in shallow scratch tests with classical and universal size effect laws

(2017) Yaneng Zhou   ENGINEERING FRACTURE MECHANICS

In situ scratch testing and abrasion simulation of WC/Co

(2017) Mark Gee et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Microstructure–toughness relationships in calcium aluminate cement–polymer composites using instrumented scratch testing

(2017) Kevin Anderson et al.   JOURNAL OF MATERIALS SCIENCE

Quantitative analysis of scratch-induced microabrasion on silica glass

(2017) Elham Moayedi et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Microstructural and geomechanical analysis of Bakken shale at nanoscale

(2017) Kouqi Liu et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Simultaneous Identification of Rock Strength and Fracture Properties Via Scratch Test

(2017) Xianqun He et al.   ROCK MECHANICS AND ROCK ENGINEERING

Assessment of Mudrock Brittleness with Micro-scratch Testing

(2017) Luis Alberto Hernandez-Uribe et al.   ROCK MECHANICS AND ROCK ENGINEERING

Discrete Element Modeling of Micro-scratch Tests: Investigation of Mechanisms of CO2 Alteration in Reservoir Rocks

(2017) Zhuang Sun et al.   ROCK MECHANICS AND ROCK ENGINEERING

Atomistic Insights on the Wear/Friction Behavior of Nanocrystalline Ferrite During Nanoscratching as Revealed by Molecular Dynamics

(2017) A. T. AlMotasem et al.   TRIBOLOGY LETTERS

Rate-independent fracture toughness of gray and black kerogen-rich shales

(2017) Pooyan Kabir et al.   Acta Geotechnica

CO2 -induced chemo-mechanical alteration in reservoir rocks assessed via batch reaction experiments and scratch testing

(2017) Michael Aman et al.   Greenhouse Gases-Science and Technology

Investigating the Wear Behavior of Fe-Based Amorphous Coatings under Nanoscratch Tests

(2017) Yixuan Wu et al.   Metals

Molecular dynamics simulation of nanotribology properties of CuZr metallic glasses

(2016) Cheng-Da Wu   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Rebuttal: Shallow and deep scratch tests as powerful alternatives to assess the fracture properties of quasi-brittle materials

(2016) Ange-Therese Akono et al.   ENGINEERING FRACTURE MECHANICS

Fracture mechanics of sharp scratch strength of polycrystalline alumina

(2016) Robert F. Cook   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Direct atomic-scale evidence for shear–dilatation correlation in metallic glasses

(2016) Yun-Jiang Wang et al.   SCRIPTA MATERIALIA

Progressive shear band propagation in metallic glasses under compression

(2015) R.T. Qu et al.   ACTA MATERIALIA

Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges

(2015) M. Sebastiani et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Rebuttal: Shallow wide groove scratch tests do not give fracture toughness

(2015) Jeen-Shang Lin et al.   ENGINEERING FRACTURE MECHANICS

Strain-rate-dependent deformation behavior in a Ti-based bulk metallic glass composite upon dynamic deformation

(2015) J. Bai et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Biodegradable Mg–Zn–Ca–Sr bulk metallic glasses with enhanced corrosion performance for biomedical applications

(2015) Haifei Li et al.   MATERIALS & DESIGN

Modeling the ductile–brittle failure mode transition in rock cutting

(2014) Yaneng Zhou et al.   ENGINEERING FRACTURE MECHANICS

Discussion: Strength-to-fracture scaling in scratching

(2014) Ange-Therese Akono et al.   ENGINEERING FRACTURE MECHANICS

Finite element analysis of large contact deformation of an elastic–plastic sinusoidal asperity and a rigid flat

(2014) Ming Liu   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

First-principles study of graphyne on SiO2

(2013) Z. Liu   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Can scratch tests give fracture toughness?

(2013) Jeen-Shang Lin et al.   ENGINEERING FRACTURE MECHANICS

Corrosion behavior and mechanical properties of Mg–Zn–Ca amorphous alloys

(2013) Fengxiang Qin et al.   INTERMETALLICS

Strengthening and toughening of Mg-based bulk metallic glass via in-situ formed B2-type AgMg phase

(2013) Shao-Gang Wang et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Cast defects induced sample-size dependency on compressive strength and fracture toughness of Mg–Cu–Ag–Gd bulk metallic glass

(2012) Shao-Gang Wang et al.   INTERMETALLICS

Experimental determination of the fracture toughness via microscratch tests: Application to polymers, ceramics, and metals

(2012) Ange-Therese Akono et al.   JOURNAL OF MATERIALS RESEARCH

The scratch test for strength and fracture toughness determination of oil well cements cured at high temperature and pressure

(2011) Franz-Josef Ulm et al.   CEMENT AND CONCRETE RESEARCH

Investigations of compressive strength on Cu-Hf-Al bulk metallic glasses: Compositional dependence of malleability and Weibull statistics

(2011) Peng Jia et al.   INTERMETALLICS

Deformation and fracture behavior of corrosion-resistant, potentially biocompatible, Ti40Zr10Cu38Pd12 bulk metallic glass

(2011) J. Fornell et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Wear behaviors of bulk metallic glass alloy and hardened steel having the same hardness value

(2011) D.H. Kwon et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mg-based bulk metallic glasses: Elastic properties and their correlations with toughness and glass transition temperature

(2011) Shao-Gang Wang et al.   JOURNAL OF MATERIALS RESEARCH

Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass

(2011) J. Fornell et al.   Journal of the Mechanical Behavior of Biomedical Materials

A damage-tolerant glass

(2011) Marios D. Demetriou et al.   NATURE MATERIALS

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization

(2010) Qiang He et al.   ACTA MATERIALIA

Mechanical performance of metallic glasses during nanoscratch tests

(2010) Yongjiang Huang et al.   INTERMETALLICS

The fracture toughness of bulk metallic glasses

(2010) Jian Xu et al.   JOM

Improving plasticity and toughness of Cu-Zr-Y-Al bulk metallic glasses via compositional tuning towards the CuZr

(2010) Yong Shen et al.   JOURNAL OF MATERIALS RESEARCH

Shape Memory Bulk Metallic Glass Composites

(2010) Douglas C. Hofmann   SCIENCE

Hf–Cu–Ni–Al bulk metallic glasses: Optimization of glass-forming ability and plasticity

(2009) Li Zhang et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Study of scratching Mg-based BMG using nanoindenter with Berkovich probe

(2009) C.T. Pan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Notch toughness of Cu-based bulk metallic glasses

(2009) Peng Jia et al.   SCRIPTA MATERIALIA

Micro-scratch study of a magnetron-sputtered Zr-based metallic-glass film

(2009) F.X. Liu et al.   SURFACE & COATINGS TECHNOLOGY

Indentation and friction of Zr-based bulk metallic glasses on nano-scale

(2008) M.Z. Ma et al.   MATERIALS LETTERS