Influence of sliding velocity on microscratch response of carbohydrate polymers by Berkovich indenter

Multiscale analysis of the thermal degradation of polyamide 6,6: Correlating chemical structure to mechanical properties

(2021) M. Pliquet et al.   POLYMER DEGRADATION AND STABILITY

Towards understanding the scratchability in functional glasses

(2021) S. Kasimuthumaniyan et al.   CERAMICS INTERNATIONAL

Influence of Sample Tilt and Applied Load on Microscratch Behavior of Copper Under a Spherical Diamond Indenter

(2021) Ming Liu   TRIBOLOGY LETTERS

Tensile elongation at break for polymers related to Vickers hardness

(2020) Witold Brostow et al.   MATERIALS LETTERS

Scratch behavior of polycarbonate by Rockwell C diamond indenter under progressive loading

(2020) Ming Liu et al.   POLYMER TESTING

Mechanical properties of glassy polymers with controlled NP spatial organization

(2020) J. Jancar et al.   POLYMER TESTING

Probing athletics tracks degradation using a microscratch technique

(2020) Luca Andena et al.   POLYMER TESTING

Micromechanical performance of high-density polyethylene: Experimental and modeling approaches for HDPE and its alumina-nanocomposites

(2020) Viacheslav Balobanov et al.   POLYMER TESTING

Sliding of a diamond sphere on fused silica under ramping load

(2020) Ming Liu et al.   Materials Today Communications

Contact Area and Shear Stress in Repeated Single-Asperity Sliding of Steel on Polymer

(2019) Xian-Qiang Pei et al.   TRIBOLOGY LETTERS

Effect of Sample Tilt on Measurement of Friction Coefficient by Constant-Load Scratch Testing of Copper with a Spherical Indenter

(2019) Chenghui Gao et al.   JOURNAL OF TESTING AND EVALUATION

Tribological characterization of jaspilite by linear scratch test

(2019) R.V. Magnol et al.   WEAR

Mechanical response of three semi crystalline polymers under different stress states: Experimental investigation and modelling

(2019) João P. Manaia et al.   POLYMER TESTING

Sliding of a diamond sphere on K9 glass under progressive load

(2019) Ming Liu et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Scratch-tip-size effect and change of friction coefficient in nano / micro scratch tests using XFEM

(2018) Kwangmin Lee et al.   TRIBOLOGY INTERNATIONAL

Fundamental understanding of the deformation mechanism and corresponding behavior of RB-SiC ceramics subjected to nano-scratch in ambient temperature

(2018) Zhipeng Li et al.   APPLIED SURFACE SCIENCE

Investigation on friction behavior and processing depth prediction of polymer in nanoscale using AFM probe-based nanoscratching method

(2017) Yanquan Geng et al.   TRIBOLOGY INTERNATIONAL

Strain-rate sensitivity of scratch hardness and deformation mechanism in nanocrystalline Ni under micro-scratch testing

(2016) Rongtao Zhu et al.   JOURNAL OF MATERIALS SCIENCE

Microstructural changes and strain hardening effects in abrasive contacts at different relative velocities and temperatures

(2016) H. Rojacz et al.   MATERIALS CHARACTERIZATION

Microscopic fracture characterization of gas shale via scratch testing

(2016) Ange-Therese Akono et al.   MECHANICS RESEARCH COMMUNICATIONS

The influence of surface properties on sliding contact temperature and friction for polyetheretherketone (PEEK)

(2016) K.A. Laux et al.   POLYMER

Changes in the mechanical properties of laser-welded polymer specimens of polypropylene and polycarbonate through different sterilization procedures

(2016) Kai Holl et al.   POLYMER ENGINEERING AND SCIENCE

Steady-state scratch testing of polymers

(2016) B.R.K. Blackman et al.   POLYMER TESTING

Effects of ball burnishing on surface properties of low density polyethylene

(2016) Łukasz Janczewski et al.   TRIBOLOGY INTERNATIONAL

In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate

(2016) Jianwei Zhang et al.   TRIBOLOGY INTERNATIONAL

Investigation of the nanoscale elastic recovery of a polymer using an atomic force microscopy-based method

(2015) Yanquan Geng et al.   MEASUREMENT SCIENCE and TECHNOLOGY

An improved technique for characterizing the fracture toughness via scratch test experiments

(2014) Ange-Therese Akono et al.   WEAR

An experimental investigation of the scratch behaviour of polymers – 2: Influence of hard or soft fillers

(2014) Pinar Kurkcu et al.   WEAR

On the mechanism of material removal in nanometric cutting of metallic glass

(2013) Pengzhe Zhu et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Study of nanoscratching of polymers by using molecular dynamics simulations

(2013) DanDan Yuan et al.   Science China-Physics Mechanics & Astronomy

Effect of normal load and roughness on the nanoscale friction coefficient in the elastic and plastic contact regime

(2013) Aditya Kumar et al.   Beilstein Journal of Nanotechnology

Core/shell rubber toughened polyamide 6: an effective way to get good balance between toughness and yield strength

(2013) Dean Shi et al.   RSC Advances

Microscratch behavior of copper–graphite composites

(2012) Jin-Kun Xiao et al.   TRIBOLOGY INTERNATIONAL

Fracture scaling relations for scratch tests of axisymmetric shape

(2011) Ange-Therese Akono et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Microscratch resistance of ophthalmic coatings on organic lenses

(2011) J. Caro et al.   SURFACE & COATINGS TECHNOLOGY

Scratch deformations of poly(etheretherketone)

(2011) T. Iqbal et al.   WEAR

Scratching polycarbonate: A quantitative model

(2011) L.C.A. van Breemen et al.   WEAR

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization

(2010) Qiang He et al.   ACTA MATERIALIA

Mechanical performance of metallic glasses during nanoscratch tests

(2010) Yongjiang Huang et al.   INTERMETALLICS

AFM indentation method used for elastic modulus characterization of interfaces and thin layers

(2010) M. A. Monclus et al.   JOURNAL OF MATERIALS SCIENCE

Dry sliding and boundary lubrication performance of a UHMWPE/CNTs nanocomposite coating on steel substrates at elevated temperatures

(2010) M. Abdul Samad et al.   WEAR

Micro-scratch study of a magnetron-sputtered Zr-based metallic-glass film

(2009) F.X. Liu et al.   SURFACE & COATINGS TECHNOLOGY

Effects of sliding velocity and applied load on the tribological mechanism of amorphous poly-ether–ether–ketone (PEEK)

(2007) G. Zhang et al.   TRIBOLOGY INTERNATIONAL