The effects of engine design and operating parameters on the performance of a diesel engine fueled with diesel-biodiesel blends

Performance analysis and optimization of irreversible Dual–Atkinson cycle engine (DACE) with heat transfer effects under maximum power and maximum power density conditions

(2016) Guven Gonca   APPLIED MATHEMATICAL MODELLING

The influences of the engine design and operating parameters on the performance of a turbocharged and steam injected diesel engine running with the Miller cycle

(2016) Guven Gonca et al.   APPLIED MATHEMATICAL MODELLING

Thermodynamic analysis and performance maps for the irreversible Dual–Atkinson cycle engine (DACE) with considerations of temperature-dependent specific heats, heat transfer and friction losses

(2016) Guven Gonca   ENERGY CONVERSION AND MANAGEMENT

Theoretical and experimental study on the performance of a diesel engine fueled with diesel–biodiesel blends

(2016) Guven Gonca et al.   RENEWABLE ENERGY

Effects of Equivalence Ratio and Mean Piston Speed on Performance of an Irreversible Dual Cycle

(2016) R. Ebrahimi   ACTA PHYSICA POLONICA A

Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters

(2015) Guven Gonca et al.   APPLIED ENERGY

Comprehensive performance analyses and optimization of the irreversible thermodynamic cycle engines (TCE) under maximum power (MP) and maximum power density (MPD) conditions

(2015) Guven Gonca et al.   APPLIED THERMAL ENGINEERING

Application of the Miller cycle and turbo charging into a diesel engine to improve performance and decrease NO emissions

(2015) Guven Gonca et al.   ENERGY

Combustion and emissions of compression ignition in a direct injection diesel engine fueled with pentanol

(2015) Li Li et al.   ENERGY

Investigation of the effects of renewable diesel fuels on engine performance, combustion, and emissions

(2015) Dolanimi Ogunkoya et al.   FUEL

Investigation of the influences of steam injection on the equilibrium combustion products and thermodynamic properties of bio fuels (biodiesels and alcohols)

(2015) Guven Gonca   FUEL

Investigation of Heat Transfer Influences on Performance of Air-Standard Irreversible Dual-Miller Cycle

(2015) Guven Gonca et al.   JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER

Simulation of performance and nitrogen oxide formation of a hydrogen-enriched diesel engine with the steam injection method

(2015) Guven Gonca et al.   Thermal Science

Influence of butanol addition to diesel–biodiesel blend on engine performance and particulate emissions of a stationary diesel engine

(2014) Zhi-Hui Zhang et al.   APPLIED ENERGY

Impact of nozzle holes configuration on fuel spray, wall impingement and NOx emission of a diesel engine for biodiesel–diesel blend (B20)

(2014) Subhash Lahane et al.   APPLIED THERMAL ENGINEERING

An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine

(2014) H.G. How et al.   ENERGY

Experimental investigation on the combustion, performance and pollutant emissions of biodiesel from animal fat residues on a direct injection diesel engine

(2014) Sary Awad et al.   ENERGY

The effects of steam injection on the performance and emission parameters of a Miller cycle diesel engine

(2014) Guven Gonca et al.   ENERGY

Possibility of using biodiesel from sunflower oil as an additive for the improvement of lubrication properties of low-sulfur diesel fuel

(2014) Milan Tomic et al.   ENERGY

Factors affecting biodiesel engine performance and exhaust emissions – Part I: Review

(2014) James Pullen et al.   ENERGY

Effects of fuels produced from fish and cooking oils on performance and emissions of a diesel engine

(2014) Rasim Behçet et al.   ENERGY

Development and experimental study on organic Rankine cycle system with single-screw expander for waste heat recovery from exhaust of diesel engine

(2014) Ye-Qiang Zhang et al.   ENERGY

Experimental and simulation investigation of the combustion characteristics and emissions using n -butanol/biodiesel dual-fuel injection on a diesel engine

(2014) Haifeng Liu et al.   ENERGY

Factors affecting biodiesel engine performance and exhaust emissions – Part II: Experimental study

(2014) James Pullen et al.   ENERGY

Effect of fuel oxygen on the energetic and exergetic efficiency of a compression ignition engine fuelled separately with palm and karanja biodiesels

(2014) Jibanananda Jena et al.   ENERGY

Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine

(2014) Hwai Chyuan Ong et al.   ENERGY

Theoretical and experimental investigation on effect of injection timing on NOx emission of biodiesel blend

(2014) S. Saravanan et al.   ENERGY

Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture

(2014) Özer Can   ENERGY CONVERSION AND MANAGEMENT

Performance and emissions of a diesel engine fueled by biodiesel–diesel, biodiesel–diesel-additive and kerosene–biodiesel blends

(2014) Murari Mohon Roy et al.   ENERGY CONVERSION AND MANAGEMENT

Effect of biodiesel blends on engine performance and exhaust emission for diesel dual fuel engine

(2014) R. Mohsin et al.   ENERGY CONVERSION AND MANAGEMENT

Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends

(2014) I.M. Rizwanul Fattah et al.   ENERGY CONVERSION AND MANAGEMENT

Diesel engine emissions and performance from blends of citrus sinensis biodiesel and diesel fuel

(2014) Gökhan Tüccar et al.   FUEL

Combustion and emissions characteristics of Diesel and soybean biodiesel over wide ranges of intake pressure and oxygen concentration in a compression–ignition engine at a light-load condition

(2014) Junghwan Kim et al.   FUEL

Finite-time thermodynamic modeling and analysis of an irreversible Miller cycle working on a four-stroke engine

(2014) Jiming Lin et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Biodiesel produced from crambe oil in Brazil—A study of performance and emissions in a diesel cycle engine generator

(2014) Helton Aparecido Rosa et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Performance Optimization of an Air-Standard Irreversible Dual-Atkinson Cycle Engine Based on the Ecological Coefficient of Performance Criterion

(2014) Guven Gonca et al.   TheScientificWorldJOURNAL

Performance maps for an air-standard irreversible Dual–Miller cycle (DMC) with late inlet valve closing (LIVC) version

(2013) Guven Gonca et al.   ENERGY

Use of water containing acetone–butanol–ethanol for NO x -PM (nitrogen oxide-particulate matter) trade-off in the diesel engine fueled with biodiesel

(2013) Yu-Cheng Chang et al.   ENERGY

Investigation of the effects of steam injection on performance and NO emissions of a diesel engine running with ethanol–diesel blend

(2013) Guven Gonca   ENERGY CONVERSION AND MANAGEMENT

Emissions, performance and cylinder pressure of diesel engine fuelled by biodiesel fuel

(2013) Mohamed Saied Shehata   FUEL

Effects of animal fat based biodiesel on a TDI diesel engine performance, combustion characteristics and particle number and size distribution emissions

(2013) Carmen C. Barrios et al.   FUEL

Heat transfer effects on the performance of an air-standard irreversible dual cycle

(2013) Yasin Ust et al.   INTERNATIONAL JOURNAL OF VEHICLE DESIGN

Performance and emission characteristics of biodiesel from different origins: A review

(2013) Niraj Kumar et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

A Study on Late Intake Valve Closing Miller Cycled Diesel Engine

(2012) Guven Gonca et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Performance and exhaust emission characteristics of a CI engine fueled with biodiesel (fish oil) with DEE as additive

(2012) C. Swaminathan et al.   BIOMASS & BIOENERGY

Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel

(2012) A.K. Hossain et al.   FUEL

Performance analysis of an irreversible Miller cycle with considerations of relative air–fuel ratio and stroke length

(2011) Rahim Ebrahimi   APPLIED MATHEMATICAL MODELLING

Thermodynamic modeling of performance of a Miller cycle with engine speed and variable specific heat ratio of working fluid

(2011) Rahim Ebrahimi   COMPUTERS & MATHEMATICS WITH APPLICATIONS

Crude palm oil fuel for diesel-engines: Experimental and ANN simulation approaches

(2011) T.F. Yusaf et al.   ENERGY

Performance and emission characteristics of a diesel engine fuelled with biodiesel–ethanol and biodiesel–methanol blends at elevated air temperatures

(2011) Nadir Yilmaz   FUEL

Review of biodiesel composition, properties, and specifications

(2011) S. Kent Hoekman et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil

(2010) M.A. Kalam et al.   ENERGY

Effects of mean piston speed, equivalence ratio and cylinder wall temperature on performance of an Atkinson engine

(2010) Rahim Ebrahimi   MATHEMATICAL AND COMPUTER MODELLING

Performance evaluation of a diesel engine fueled with methyl ester of castor seed oil

(2009) N.L. Panwar et al.   APPLIED THERMAL ENGINEERING

Effects of combustion efficiency on a Dual cycle

(2009) Osman Azmi Ozsoysal   ENERGY CONVERSION AND MANAGEMENT

Finite-time thermodynamic modeling and analysis for an irreversible Dual cycle

(2009) Yanlin Ge et al.   MATHEMATICAL AND COMPUTER MODELLING

The effects of preheated cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine

(2008) Murat Karabektas et al.   APPLIED THERMAL ENGINEERING

Finite-time thermodynamic modelling and analysis of an irreversible Otto-cycle

(2007) Yanlin Ge et al.   APPLIED ENERGY

Effects of heat loss as percentage of fuel’s energy, friction and variable specific heats of working fluid on performance of air standard Otto cycle

(2007) Jiann-Chang Lin et al.   ENERGY CONVERSION AND MANAGEMENT