Degradation response of mode I and mode III fracture resistance of sandstone under wetting–drying cycles with an acidic solution

True Mode $$\mathrm {III}$$ Fracturing of Rocks: An Axially Double-Edge Notched Brazilian Disk Test

(2022) Bahador Bahrami et al.   ROCK MECHANICS AND ROCK ENGINEERING

Effect of coupled thermal-chemical on the mixed mode I-II fracture characteristic of sandstone

(2022) Zhiqiang Gan et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Experimental investigation on mixed mode I-III fracture characteristics of sandstone corroded by periodic acid solution

(2021) Zhiqiang Gan et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Mechanical characteristics and freezing-thawing degradation mechanism for mortar samples under sodium sulfate solutions attack

(2021) Tielin Han et al.   Arabian Journal of Geosciences

Fracture properties of sandstone degradation under the action of drying–wetting cycles in acid and alkaline environments

(2020) Hong Liang et al.   Arabian Journal of Geosciences

Shear Strength of Rock Fractures Under Dry, Surface Wet and Saturated Conditions

(2020) Bo Li et al.   ROCK MECHANICS AND ROCK ENGINEERING

Laboratory investigation of the mode-I fracture of sandstone caused by a combination of freeze-thaw cycles and chemical solutions

(2020) Tielin Han et al.   Bulletin of Engineering Geology and the Environment

Combined effects of salts and wetting–drying cycles on granite weathering

(2020) Fei Zhao et al.   Bulletin of Engineering Geology and the Environment

Investigation of fracture process zone properties of mode I fracture in heat-treated granite through digital image correlation

(2020) Jinwen Wu et al.   ENGINEERING FRACTURE MECHANICS

Fracture behavior and damage mechanisms of sandstone subjected to wetting-drying cycles

(2020) Xin Cai et al.   ENGINEERING FRACTURE MECHANICS

Effect of wetting–drying cycles on mode I and mode II fracture toughness of sandstone in natural (pH = 7) and acidic (pH = 3) environments

(2020) Arash Dehestani et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

An extended maximum tangential strain energy density criterion considering T‐stress for combined mode I–III brittle fracture

(2020) Wen Hua et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Experimental Investigation of the Physical Properties and Microstructure of Slate under Wetting and Drying Cycles Using Micro-CT and Ultrasonic Wave Velocity Tests

(2020) Junwei Ma et al.   SENSORS

On the comparison of two mixed-mode I + III fracture test specimens

(2020) A. Bahmani et al.   ENGINEERING FRACTURE MECHANICS

Experimental Study on Mixed Mode Fracture Behavior of Sandstone under Water–Rock Interactions

(2019) Wen Hua et al.   Processes

Effect of wetting and drying cycles on microstructure of rock based on SEM

(2019) Xiaojie Yang et al.   Environmental Earth Sciences

Thickness effect on the mode III fracture resistance and fracture path of rock using ENDB specimens

(2019) Jamal Bidadi et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Seasonal Variability of Mineral Formation in Microbial Mats Subjected to Drying and Wetting Cycles in Alkaline and Hypersaline Sedimentary Environments

(2018) Ó. Cabestrero et al.   AQUATIC GEOCHEMISTRY

Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement

(2018) Ahmad Mansourian et al.   CONSTRUCTION AND BUILDING MATERIALS

Dynamic tensile properties of sandstone subjected to wetting and drying cycles

(2018) Zilong Zhou et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental study on the permeability characteristics of sandstone in different chemical solutions

(2018) Huayan Yao et al.   KSCE Journal of Civil Engineering

Quantifying Microstructural Damage of Sandstone after Hydrochemical Corrosion

(2018) Tielin Han et al.   International Journal of Geomechanics

Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen

(2018) M.R.M. Aliha et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of wetting-drying cycles on the pore structure and mechanical properties of mudstone from Simian Mountain

(2018) Yunfeng Zhao et al.   CONSTRUCTION AND BUILDING MATERIALS

Combined effects of salt, cyclic wetting and drying cycles on the physical and mechanical properties of sandstone

(2018) Qiang Sun et al.   ENGINEERING GEOLOGY

Effect of Dry-Wet Cycling on the Mechanical Properties of Rocks: A Laboratory-Scale Experimental Study

(2018) Xiaojie Yang et al.   Processes

Evaluating long-term strength of rock under changing environments from air to water

(2017) Yoshitaka Nara et al.   ENGINEERING FRACTURE MECHANICS

Influence of cyclic wetting and drying on physical and dynamic compressive properties of sandstone

(2017) Zilong Zhou et al.   ENGINEERING GEOLOGY

Physical and Mechanical Properties of Marble under the Combined Effects of Chemical Solutions and Freeze–Thaw Cycles

(2017) Tielin Han et al.   GEOTECHNICAL TESTING JOURNAL

Experimental investigation on the effect of wetting-drying cycles on mixed mode fracture toughness of sandstone

(2017) Wen Hua et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Rock Fracture Toughness Study Under Mixed Mode I/III Loading

(2017) M. R. M. Aliha et al.   ROCK MECHANICS AND ROCK ENGINEERING

Geometric and fractal analysis of dynamic cracking patterns subjected to wetting-drying cycles

(2017) Ce Wang et al.   SOIL & TILLAGE RESEARCH

Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation

(2017) A. Bahmani et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Study on fracture behavior of HMA mixtures under mixed mode I/III loading

(2016) S. Pirmohammad et al.   ENGINEERING FRACTURE MECHANICS

Effect of cyclic wetting and drying on the pure mode II fracture toughness of sandstone

(2016) Wen Hua et al.   ENGINEERING FRACTURE MECHANICS

A novel test specimen for investigating the mixed mode I+III fracture toughness of hot mix asphalt composites – Experimental and theoretical study

(2016) M.R.M. Aliha et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Fracture assessment of polymethyl methacrylate using sharp notched disc bend specimens under mixed mode I + III loading

(2016) M. R. M. Aliha et al.   Physical Mesomechanics

Fracturing and Damage to Sandstone Under Coupling Effects of Chemical Corrosion and Freeze–Thaw Cycles

(2016) Tielin Han et al.   ROCK MECHANICS AND ROCK ENGINEERING

Effects of Wetting and Cyclic Wetting–Drying on Tensile Strength of Sandstone with a Low Clay Mineral Content

(2016) Zhihong Zhao et al.   ROCK MECHANICS AND ROCK ENGINEERING

Influence of Water Content on Mechanical Properties of Rock in Both Saturation and Drying Processes

(2016) Zilong Zhou et al.   ROCK MECHANICS AND ROCK ENGINEERING

Effect of Chemical Corrosion on the Mechanical Characteristics of Parent Rocks for Nuclear Waste Storage

(2016) Tielin Han et al.   Science and Technology of Nuclear Installations

Macro/Microtesting and Damage and Degradation of Sandstones under Dry-Wet Cycles

(2016) Xinrong Liu et al.   Advances in Materials Science and Engineering

Fracture assessment of polymethyl methacrylate using sharp notched disc bend specimens under mixed mode I + III loading

(2016) M. R. M. Aliha et al.   Physical Mesomechanics

Numerical analysis of a new mixed mode I/III fracture test specimen

(2015) M.R.M. Aliha et al.   ENGINEERING FRACTURE MECHANICS

Deformation and shear strength of rockfill materials composed of soft siltstones subjected to stress, cyclical drying/wetting and temperature variations

(2015) B.Y. Zhang et al.   ENGINEERING GEOLOGY

The influence of cyclic wetting and drying on the fracture toughness of sandstone

(2015) Wen Hua et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Determination of mode III fracture toughness for different materials using a new designed test configuration

(2015) M.R.M. Aliha et al.   MATERIALS & DESIGN

Strength and failure characteristics of Jurassic Red-Bed sandstone under cyclic wetting–drying conditions

(2014) Zhenhua Zhang et al.   GEOPHYSICAL JOURNAL INTERNATIONAL

Mechanical properties of Qinling biotite granite after high temperature treatment

(2014) Shi Liu et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Investigation of the effects of wetting–drying and freezing–thawing cycles on some physical and mechanical properties of selected ignimbrites

(2013) A. Özbek   Bulletin of Engineering Geology and the Environment

An effective means for evaluating mixed-mode I/III stress intensity factors using single-edge notch beam specimen

(2013) Babak Ahmadi-Moghadam et al.   JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN

The Mechanical Properties of Mudstone at High Temperatures: an Experimental Study

(2013) Lianying Zhang et al.   ROCK MECHANICS AND ROCK ENGINEERING

Water Saturation Effects on the Brazilian Tensile Strength of Gypsum and Assessment of Cracking Processes Using High-Speed Video

(2013) Louis Ngai Yuen Wong et al.   ROCK MECHANICS AND ROCK ENGINEERING

Influence of relative humidity on fracture toughness of rock: Implications for subcritical crack growth

(2012) Yoshitaka Nara et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

The influence of fabric and water content on selected rock mechanical parameters of travertine, examples from Hungary

(2010) Á. Török et al.   ENGINEERING GEOLOGY

Effects of relative humidity and temperature on subcritical crack growth in igneous rock

(2010) Yoshitaka Nara et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Effects of humidity and temperature on subcritical crack growth in sandstone

(2010) Yoshitaka Nara et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Experimental sandstone weathering using different wetting and drying moisture amplitudes

(2007) P. D. Sumner et al.   EARTH SURFACE PROCESSES AND LANDFORMS