Fluidization and bubbling behavior of potash particles in a deep fluidized bed

Correlation for predicting minimum fluidization velocity with different size distributions and bed inventories at elevated temperature in gas-solid fluidized bed

(2022) Krittin Korkerd et al.   ADVANCED POWDER TECHNOLOGY

A Review on Fast Tomographic Imaging Techniques and Their Potential Application in Industrial Process Control

(2022) Uwe Hampel et al.   SENSORS

Application of electrical capacitance tomography in circulating fluidised beds – A review

(2020) Haigang Wang et al.   APPLIED THERMAL ENGINEERING

CFD-DEM study of gas-solid flow regimes in a Wurster type fluidized bed with experimental validation by electrical capacitance tomography

(2020) H.Q. Che et al.   CHEMICAL ENGINEERING JOURNAL

Characterization of gas–solid fluidization in fluidized beds with different particle size distributions by analyzing pressure fluctuations in wind caps

(2018) Huawei Jiang et al.   CHEMICAL ENGINEERING JOURNAL

Models for Predicting Average Bubble Diameter and Volumetric Bubble Flux in Deep Fluidized Beds

(2018) Cornelius E. Agu et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Real-Time Magnetic Resonance Imaging of Bubble Behavior and Particle Velocity in Fluidized Beds

(2018) Alexander Penn et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Estimation of Bubble Properties in Bubbling Fluidized Bed Using ECVT Measurements

(2018) Vaibhav Agrawal et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Bubble size and bubble rise velocity estimation by means of electrical capacitance tomography within gas-solids fluidized beds

(2018) Xiaoxu Li et al.   MEASUREMENT

Improved models for predicting bubble velocity, bubble frequency and bed expansion in a bubbling fluidized bed

(2018) Cornelius Emeka Agu et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

Bubbling fluidized bed characterization using Electrical Capacitance Volume Tomography (ECVT)

(2013) Justin M. Weber et al.   POWDER TECHNOLOGY

Moisture distribution and hydrodynamics of wet granules during fluidized-bed drying characterized with volumetric electrical capacitance tomography

(2012) Ville Rimpiläinen et al.   CHEMICAL ENGINEERING SCIENCE

Electrical Capacitance Volume Tomography Imaging of Three-Dimensional Flow Structures and Solids Concentration Distributions in a Riser and a Bend of a Gas–Solid Circulating Fluidized Bed

(2012) Fei Wang et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

A comparison of magnetic resonance imaging and electrical capacitance tomography: An air jet through a bed of particles

(2012) T.C. Chandrasekera et al.   POWDER TECHNOLOGY

Fast forward problem solver for image reconstruction by nonlinear optimization in electrical capacitance tomography

(2010) Waldemar Smolik   FLOW MEASUREMENT AND INSTRUMENTATION

Online measurement and control of solids moisture in fluidised bed dryers

(2009) H.G. Wang et al.   CHEMICAL ENGINEERING SCIENCE

Mass Transfer Coefficient for Drying of Moist Particulate in a Bubbling Fluidized Bed

(2008) Y. T. Makkawi et al.   CHEMICAL ENGINEERING & TECHNOLOGY

Characterisation of fluidised bed granulation processes using in-situ Raman spectroscopy

(2008) G.M. Walker et al.   CHEMICAL ENGINEERING SCIENCE