Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

(2022) Kaveh Edalati et al.   Materials Research Letters

Controlling the Young’s modulus of a ß-type Ti-Nb alloy via strong texturing by LPBF

(2022) Stefan Pilz et al.   MATERIALS & DESIGN

Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales

(2021) Víctor Tuninetti et al.   Metals

Determining elastic anisotropy of textured polycrystals using resonant ultrasound spectroscopy

(2021) Jordan A. Evans et al.   Journal of Materials Science

Influence of residual stress and texture on the resonances of polycrystalline metals

(2021) Christopher M. Kube et al.   JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA

Production of Ultrafine-Grained Titanium with Suitable Properties for Dental Implant Applications by RS-ECAP Process

(2020) Mehdi Abbasi et al.   METALS AND MATERIALS INTERNATIONAL

Microstructure and tensile anisotropy of pure Ti processed by up-scaled RD-ECAP

(2020) Yanxia Gu et al.   MATERIALS CHARACTERIZATION

Microstructure and Texture Evolution in a Post-dynamic Recrystallized Titanium During Annealing, Monotonic and Cyclic Loading

(2020) P.-C. Zhao et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

EBSD analysis of grain-refinement mechanisms operating during equal-channel angular pressing of commercial-purity titanium

(2019) G.S. Dyakonov et al.   ACTA MATERIALIA

Elastic constants of β-Ti15Mo

(2019) Jitka Nejezchlebová et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fe-stabilized duplex α/β microstructure containing γ titanium hydride in Ti grade 2 obtained by volumetrically incomplete phase transition

(2019) K. Tesař et al.   MATERIALS CHARACTERIZATION

Effect of severe plastic deformation on the damping behavior of titanium

(2019) S.V. Sajadifar et al.   MATERIALS LETTERS

Fracture Strength and Osseointegration of an Ultrafine-Grained Titanium Mini Dental Implant after Macromorphology Optimization

(2019) Yulu Wu et al.   ACS Biomaterials-Science & Engineering

High-cycle-fatigue induced continuous grain growth in ultrafine-grained titanium

(2019) P. Zhao et al.   ACTA MATERIALIA

Ultrafine‐Grained Titanium‐Based Alloys: Structure and Service Properties for Engineering Applications

(2019) Irina P. Semenova et al.   ADVANCED ENGINEERING MATERIALS

On the complementarity between resistivity measurement and ultrasonic measurement for in-situ characterization of phase transitions in Ti-alloys

(2018) J. Nejezchlebová et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of pre-annealing deformation on the recrystallized texture and grain boundary misorientation in commercial pure titanium

(2018) Ying Wang et al.   MATERIALS CHARACTERIZATION

TiO 2 nanotubes grown on Ti substrates with different microstructure

(2018) Hanna Sopha et al.   MATERIALS RESEARCH BULLETIN

Effects of processing conditions on microstructure and mechanical properties of equal-channel-angular-pressed titanium

(2018) M. Shaat   MATERIALS SCIENCE AND TECHNOLOGY

Characterization of the Microstructure, Local Macro-Texture and Residual Stress Field of Commercially Pure Titanium Grade 2 Prepared by CONFORM ECAP

(2018) Gergely Németh et al.   Metals

Enhancement of the corrosion resistance and mechanical properties of nanocrystalline titanium by low-temperature annealing

(2018) Agata Sotniczuk et al.   CORROSION SCIENCE

Mechanical and magnetic properties of semi-Heusler/light-metal composites consolidated by spark plasma sintering

(2017) Martin Koller et al.   MATERIALS & DESIGN

The effect of athermal and isothermal ω phase particles on elasticity of β -Ti single crystals

(2016) Jitka Nejezchlebová et al.   ACTA MATERIALIA

In vitro and in vivo studies of ultrafine-grain Ti as dental implant material processed by ECAP

(2016) Baili An et al.   Materials Science & Engineering C-Materials for Biological Applications

Ambient-temperature nanoindentation creep in ultrafine-grained titanium processed by ECAP

(2016) Xiaoyan Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Scaling up Segal's principle of Equal-Channel Angular Pressing

(2016) Stephanie Frint et al.   MATERIALS & DESIGN

A Numerical Investigation of the Effect of Cubic Crystals Orientation on the Indentation Modulus

(2015) A. Materna et al.   ACTA PHYSICA POLONICA A

The microstructural evolution and thermo-mechanical behavior of UFG Ti processed via equal channel angular pressing

(2015) Christopher S. Meredith et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and anisotropy of the mechanical properties in commercially pure titanium after equal channel angular pressing with back pressure at room temperature

(2015) A. Jäger et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Determination of All 21 Independent Elastic Coefficients of Generally Anisotropic Solids by Resonant Ultrasound Spectroscopy: Benchmark Examples

(2014) P. Sedlák et al.   EXPERIMENTAL MECHANICS

An ultrasonic internal friction study of ultrafine-grained AZ31 magnesium alloy

(2014) Martin Koller et al.   JOURNAL OF MATERIALS SCIENCE

Cryogenic equal channel angular pressing of commercially pure titanium: microstructure and properties

(2014) A. V. Podolskiy et al.   JOURNAL OF MATERIALS SCIENCE

Electron backscatter diffraction analysis of the crack development induced by uniaxial tension in commercially pure titanium

(2014) K. Tesař et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing

(2014) Roberto B. Figueiredo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature

(2014) Xicheng Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Stored energy and recrystallization kinetics of ultrafine grained titanium processed by severe plastic deformation

(2013) K. Hajizadeh et al.   PHYSICA B-CONDENSED MATTER

Sensitivity of deformation twinning to grain size in titanium and magnesium

(2011) Alireza Ghaderi et al.   ACTA MATERIALIA

Continuous ECAP process design for manufacturing a microstructure-refined bolt

(2011) Young Gwan Jin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium

(2011) Majid Hoseini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Recrystallization kinetics of ultrafine-grained Ni studied by dilatometry

(2010) Bernd Oberdorfer et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Strong crystal size effect on deformation twinning

(2010) Qian Yu et al.   NATURE

The ω-phase formation in titanium upon deformation under pressure

(2010) V. I. Zel’dovich et al.   PHYSICS OF METALS AND METALLOGRAPHY

Application of ultrasonic methods to determine elastic anisotropy of polycrystalline copper processed by equal-channel angular pressing

(2009) Hanuš Seiner et al.   ACTA MATERIALIA

Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic techniques—A comparative study

(2008) P. Majumdar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Bulk submicrocrystalline ω-Ti produced by high-pressure torsion straining

(2008) Y TODAKA et al.   SCRIPTA MATERIALIA