Splitting tensile strength of recycled tire steel fiber‐reinforced alkali‐activated slag concrete designed by Taguchi method

Development of fly ash and slag based high-strength alkali-activated foam concrete

(2022) Yifei Hao et al.   CEMENT & CONCRETE COMPOSITES

Experimental Analysis of Bearing Capacity of Basalt Fiber Reinforced Concrete Short Columns under Axial Compression

(2022) Xinzhong Wang et al.   Coatings

A review on alkali-activated slag concrete

(2021) Ismail Amer et al.   Ain Shams Engineering Journal

A Comprehensive Assessment of the Global Warming Potential of Geopolymer Concrete

(2021) Vahid Shobeiri et al.   JOURNAL OF CLEANER PRODUCTION

Evaluation of compressive and split tensile strength of slag based aluminosilicate geopolymer reinforced by waste polymeric materials using Taguchi method

(2021) Amirreza Khezrloo et al.   Materials Research Express

Mechanical properties, shrinkage, and heat evolution of alkali activated fly ash concrete

(2021) Kitipong Ruengsillapanun et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical and durability properties of alkali-activated fly ash concrete with increasing slag content

(2021) Timothy A Aiken et al.   CONSTRUCTION AND BUILDING MATERIALS

Analysis of the environmental impacts of alkali-activated concrete produced with waste glass-derived silicate activator – A LCA study

(2021) Isabella Bianco et al.   Journal of Cleaner Production

Application of DOE method in evaluating for split tensile strength of slag-based boroaluminosilicate geopolymers reinforced with steel fibers

(2021) Alireza Aghaie et al.   Journal of the Australian Ceramic Society

Experimental study on engineering properties of concrete reinforced with hybrid recycled tyre steel and polypropylene fibres

(2020) Hui Zhong et al.   JOURNAL OF CLEANER PRODUCTION

Multi-response optimization using Taguchi-Grey relational analysis for composition of fly ash-ground granulated blast furnace slag based geopolymer concrete

(2020) Jnyanendra Kumar Prusty et al.   CONSTRUCTION AND BUILDING MATERIALS

Physical & mechanical properties of fiber reinforced metakaolin-based geopolymer concrete

(2020) Amir Bahador Moradikhou et al.   CONSTRUCTION AND BUILDING MATERIALS

Characteristics of metakaolin-based geopolymer concrete for different mix design parameters

(2020) Abdulrahman Albidah et al.   Journal of Materials Research and Technology-JMR&T

Experimental study on circular steel tube-confined reinforced UHPC columns under axial loading

(2020) Jiangang Wei et al.   ENGINEERING STRUCTURES

Influences of Parameters on Slump Flow and Compressive Strength Properties of Aluminosilicate Based Flowable Geopolymer Concrete Using Taguchi Method

(2019) C. Jithendra et al.   Silicon

Optimization of mortars containing steel scale using Taguchi based grey relational analysis method

(2019) Erdinç Arıcı et al.   CONSTRUCTION AND BUILDING MATERIALS

Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability

(2019) Muhammad N.S. Hadi et al.   Journal of Building Engineering

Performance optimization of absorption refrigeration systems using Taguchi, ANOVA and Grey Relational Analysis methods

(2019) A.S. Canbolat et al.   JOURNAL OF CLEANER PRODUCTION

Engineering properties of crumb rubber alkali-activated mortar reinforced with recycled steel fibres

(2019) Hui Zhong et al.   JOURNAL OF CLEANER PRODUCTION

The recent progress of recycled steel fiber reinforced concrete

(2019) K.M. Liew et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterization and optimization of hardened properties of self-consolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers

(2018) M. Mastali et al.   COMPOSITES PART B-ENGINEERING

Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers

(2018) M. Mastali et al.   CONSTRUCTION AND BUILDING MATERIALS

Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature

(2018) Guohao Fang et al.   CONSTRUCTION AND BUILDING MATERIALS

Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites

(2018) Yazan Alrefaei et al.   CONSTRUCTION AND BUILDING MATERIALS

Fiber reinforced geopolymer from synergetic utilization of fly ash and waste tire

(2018) Gábor Mucsi et al.   JOURNAL OF CLEANER PRODUCTION

Engineering Properties of Ambient Cured Alkali-Activated Fly Ash–Slag Concrete Reinforced with Different Types of Steel Fiber

(2018) Nabeel A. Farhan et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Factors affecting the mechanical properties of alkali activated ground granulated blast furnace slag concrete

(2018) Ali A. Aliabdo et al.   CONSTRUCTION AND BUILDING MATERIALS

An experimental study on the corrosion susceptibility of Recycled Steel Fiber Reinforced Concrete

(2018) Cristina Frazão et al.   CEMENT & CONCRETE COMPOSITES

Application of recycled steel fibres in concrete elements subjected to fatigue loading

(2017)   Gradevinar

Conversion of local industrial wastes into greener cement through geopolymer technology: A case study of high-magnesium nickel slag

(2017) Zuhau Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Evaluation of hybrid steel fiber reinforcement in high performance geopolymer composites

(2017) X. Gao et al.   MATERIALS AND STRUCTURES

Split tensile strength of slag-based boroaluminosilicate geopolymer

(2017) Amirreza Khezrloo et al.   Journal of the Australian Ceramic Society

Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites

(2016) Navid Ranjbar et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of fly ash characteristics on delayed high-strength development of geopolymers

(2016) J.G. Jang et al.   CONSTRUCTION AND BUILDING MATERIALS

Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete

(2016) Iftekhair Ibnul Bashar et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance

(2016) Ali A. Aliabdo et al.   CONSTRUCTION AND BUILDING MATERIALS

High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber

(2016) Navid Ranjbar et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires

(2016) Ozkan Sengul   CONSTRUCTION AND BUILDING MATERIALS

Influence of recycled concrete aggregates on the flexural properties of reinforced alkali activated slag concrete

(2016) Parthiban Kathirvel et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of cement addition, solution resting time and curing characteristics on fly ash based geopolymer concrete performance

(2016) Ali A. Aliabdo et al.   CONSTRUCTION AND BUILDING MATERIALS

A comprehensive review on the applications of waste tire rubber in cement concrete

(2016) Blessen Skariah Thomas et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Split tensile strength of slag-based geopolymer composites reinforced with steel fibers: Application of Taguchi method in evaluating the effect of production parameters and their optimum condition

(2015) Mohammad-Javad Khalaj et al.   CERAMICS INTERNATIONAL

An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete

(2015) Enzo Martinelli et al.   CONSTRUCTION AND BUILDING MATERIALS

An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products

(2015) Wei Ken Part et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires

(2015) Kamran Aghaee et al.   MAGAZINE OF CONCRETE RESEARCH

Waste tire rubber in polymer blends: A review on the evolution, properties and future

(2015) S. Ramarad et al.   PROGRESS IN MATERIALS SCIENCE

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition

(2014) Pradip Nath et al.   CONSTRUCTION AND BUILDING MATERIALS

Cement and concrete as an engineering material: An historic appraisal and case study analysis

(2014) Colin R. Gagg   ENGINEERING FAILURE ANALYSIS

Failure mechanism of fibre reinforced concrete under splitting test using digital image correlation

(2014) Bensaid Boulekbache et al.   MATERIALS AND STRUCTURES

Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste

(2013) Sakonwan Hanjitsuwan et al.   CEMENT & CONCRETE COMPOSITES

Durability assessment of alkali activated slag (AAS) concrete

(2012) David W. Law et al.   MATERIALS AND STRUCTURES

Application of a weighted Grey-Taguchi method for optimizing recycled aggregate concrete mixtures

(2011) C.Y. Chang et al.   CEMENT & CONCRETE COMPOSITES

NaOH-activated ground fly ash geopolymer cured at ambient temperature

(2011) Kiatsuda Somna et al.   FUEL

Properties of fly ash geopolymer concrete designed by Taguchi method

(2011) Monita Olivia et al.   MATERIALS & DESIGN

Effect of binder content on the performance of alkali-activated slag concretes

(2010) Susan A. Bernal et al.   CEMENT AND CONCRETE RESEARCH

Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete

(2010) J. Wongpa et al.   MATERIALS & DESIGN