Fracture Performance of Cementitious Composites Based on Quaternary Blended Cements

Experimental Study on Effect of Coarse Aggregate Volume Fraction on Mode I and Mode II Fracture Behavior of Concrete

(2022) Yanwei Chen et al.   Journal of Advanced Concrete Technology

Effect of supplementary cementitious materials on properties of 3D printed conventional and alkali-activated concrete: A review

(2022) Mehrab Nodehi et al.   AUTOMATION IN CONSTRUCTION

Particle size distribution of aggregate effects on the reinforcing roles of carbon nanotubes in enhancing concrete ITZ

(2022) Yuan Gao et al.   CONSTRUCTION AND BUILDING MATERIALS

A comprehensive review on properties of sustainable concrete using volcanic pumice powder ash as a supplementary cementitious material

(2022) Ali S. Alqarni   CONSTRUCTION AND BUILDING MATERIALS

Research on the fracture mechanical performance of basalt fiber nano-CaCO3 concrete based on DIC technology

(2022) Huiheng Lian et al.   CONSTRUCTION AND BUILDING MATERIALS

Research on energy dissipation and damage evolution of dynamic splitting failure of basalt fiber reinforced concrete

(2022) Huanzhen Xie et al.   CONSTRUCTION AND BUILDING MATERIALS

Fatigue life estimating for chloride attacked RC beams using the S-N curve combined with mesoscale simulation of chloride ingress

(2022) Jieqiong Wu et al.   INTERNATIONAL JOURNAL OF FATIGUE

Portland and Belite Cement Hydration Acceleration by C-S-H Seeds with Variable w/c Ratios

(2022) Alejandro Morales-Cantero et al.   Materials

Experimental evaluation on mechanical and thermal insulation properties of shotcrete under constant‐variable temperature

(2022) Lianjun Chen et al.   Structural Concrete

Effect of α: Phase Nano Al2O3 and Rice Husk Ash in Cement Mortar

(2022) Alexander Gladwin Alex et al.   Advances in Civil Engineering

A simple method for determining independent fracture toughness and tensile strength of rock

(2022) Junfeng Guan et al.   International Journal of Mining Science and Technology

Influence of CSH grown in situ on steel slag powder on the performance of fresh and hardened cement pastes

(2022) Feifei Zhou et al.   CONSTRUCTION AND BUILDING MATERIALS

Determination method and prediction model of fracture and strength of recycled aggregate concrete at different curing ages

(2022) Shanshan Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Fatigue behavior of concrete: A literature review on the main relevant parameters

(2022) Fatima Zahraa Kachkouch et al.   CONSTRUCTION AND BUILDING MATERIALS

A design method for determining fracture toughness and tensile strength pertinent to concrete sieving curve

(2022) Junfeng Guan et al.   ENGINEERING FRACTURE MECHANICS

Energy evolution and failure characteristics of red sandstone under discontinuous multilevel fatigue loading

(2022) Ju Wang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Effect of ultrafine mineral admixtures on the rheological properties of fresh cement paste: A review

(2022) Fanghui Han et al.   Journal of Building Engineering

Graphene coated sand for smart cement composites

(2022) Dong Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of precast beam deflections resulting in cracks in curtain walls

(2022) Maciej Wardach et al.   ENGINEERING FAILURE ANALYSIS

Cement Matrix Modified by Mesoporous Silica of the MCM-41 Structure Type: Early-Age Properties and Microstructure Evolution

(2022) Maciej Szeląg et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Study of tensile crack growth in rock-like materials under punch shear test

(2022) Jinwei Fu et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Radiological characteristics of Self-Compacting Concretes incorporating fly ash, silica fume, and slag

(2022) H. Alperen Bulut et al.   Journal of Building Engineering

Effect of C–S–H seed/PCE nanocomposites and triisopropanolamine on portland cement properties: Hydration kinetic and strength

(2022) Haoxin Li et al.   Journal of Building Engineering

Investigation of mechanical properties of PVA fiber-reinforced cementitious composites under the coupling effect of wet-thermal and chloride salt environment

(2022) Peng Zhang et al.   Case Studies in Construction Materials

Pozzolanic characterization of waste newspaper ash as a supplementary cementing material of concrete cylinders

(2022) Leong Sing Wong et al.   Case Studies in Construction Materials

Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing

(2021) Grzegorz Ludwik Golewski et al.   Materials

Early Hydration Heat of Calcium Sulfoaluminate Cement with Influences of Supplementary Cementitious Materials and Water to Binder Ratio

(2021) Jun Zhang et al.   Materials

Macroscopic and microscopic analyses on mechanical performance of metakaolin/fly ash based geopolymer mortar

(2021) Peng Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Advantages and shortcomings of the utilization of recycled wastes as aggregates in structural concretes

(2021) Sérgio Miraldo et al.   CONSTRUCTION AND BUILDING MATERIALS

Green Concrete Based on Quaternary Binders with Significant Reduced of CO2 Emissions

(2021) Grzegorz Ludwik Golewski   Energies

Recycling of rice husk waste for a sustainable concrete: A critical review

(2021) Bassam A. Tayeh et al.   Journal of Cleaner Production

Rheology of Cement Pastes with Siliceous Fly Ash and the CSH Nano-Admixture

(2021) Bartosz Szostak et al.   Materials

Study on Reduction Effect of Vibration Propagation due to Internal Explosion Using Composite Materials

(2021) Sangwoo Park et al.   International Journal of Concrete Structures and Materials

Efficient mitigation of high-speed train vibrations on adjacent reinforced concrete buildings

(2021) Alexandros Lyratzakis et al.   CONSTRUCTION AND BUILDING MATERIALS

Interfacial properties of geopolymer mortar and concrete substrate: Effect of polyvinyl alcohol fiber and nano-SiO2 contents

(2021) Zhen Gao et al.   CONSTRUCTION AND BUILDING MATERIALS

Strengthening the very early-age structure of cementitious composites with coal fly ash via incorporating a novel nanoadmixture based on C-S-H phase activators

(2021) Grzegorz Ludwik Golewski et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of T-stress on mixed mode I/II fracture of composite materials: Reinforcement isotropic solid model in combination with maximum shear stress theory

(2021) Mahdi Fakoor et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Application of the C-S-H Phase Nucleating Agents to Improve the Performance of Sustainable Concrete Composites Containing Fly Ash for Use in the Precast Concrete Industry

(2021) Grzegorz Ludwik Golewski et al.   Materials

Mechanical properties and prediction of fracture parameters of geopolymer/alkali-activated mortar modified with PVA fiber and nano-SiO2

(2020) Peng Zhang et al.   CERAMICS INTERNATIONAL

Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition

(2020) Grzegorz Ludwik Golewski   Energies

Properties of Fibrous Concrete Made with Plastic Optical Fibers from E-Waste

(2020) Zbigniew Suchorab et al.   Materials

Influence of Fly Ash Additive on the Properties of Concrete with Slag Cement

(2020) Anna Szcześniak et al.   Materials

Nanoparticle-reinforced building materials with applications in civil engineering

(2020) Peng Zhang et al.   Advances in Mechanical Engineering

On the effect of internal friction on torsional and axial cyclic loading

(2020) M. Mehdizadeh et al.   INTERNATIONAL JOURNAL OF FATIGUE

Estimation of the optimum content of fly ash in concrete composite based on the analysis of fracture toughness tests using various measuring systems

(2019) Grzegorz Ludwik Golewski   CONSTRUCTION AND BUILDING MATERIALS

Strength and transport characteristics of volcanic pumice powder based high strength concrete

(2019) Abdullah M. Zeyad et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of expanded polystyrene synthetic particles on the fracture parameters, brittleness and mechanical properties of concrete

(2018) Iman M. Nikbin et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Poisson’s Ratio of Closed-Cell Aluminium Foams

(2018) Jaroslav Kováčik et al.   Materials

Probabilistic micromechanical damage model for mixed mode I/II fracture investigation of composite materials

(2018) Nabi Mehri Khansari et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Effect of fly ash addition on the fracture toughness of plain concrete at third model of fracture

(2017) Grzegorz Ludwik GOLEWSKI   Journal of Civil Engineering and Management

High tech startup creation for energy efficient built environment

(2017) F. Pacheco-Torgal   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading

(2017) Grzegorz Ludwik Golewski   STRUCTURAL ENGINEERING AND MECHANICS

Sorptivity of self-compacting concrete containing fly ash and silica fume

(2016) H.Y. Leung et al.   CONSTRUCTION AND BUILDING MATERIALS

Fracture behavior of fly ash concrete containing silica fume

(2016) Peng Zhang et al.   STRUCTURAL ENGINEERING AND MECHANICS

Effect of silica fume on fracture properties of high-performance concrete containing fly ash

(2012) Peng Zhang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS

Effect of recycled PET in the fracture mechanics of polymer mortar

(2011) J.M.L. Reis et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of fly ash concrete modified with hydrated lime and silica fume

(2009) S.A. Barbhuiya et al.   CONSTRUCTION AND BUILDING MATERIALS