Rheology of Cement Pastes with Siliceous Fly Ash and the CSH Nano-Admixture
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Rheology of Cement Pastes with Siliceous Fly Ash and the CSH Nano-Admixture
Authors
Keywords
-
Journal
Materials
Volume 14, Issue 13, Pages 3640
Publisher
MDPI AG
Online
2021-06-29
DOI
10.3390/ma14133640
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing
- (2021) Grzegorz Ludwik Golewski et al. Materials
- The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading
- (2021) Grzegorz Ludwik Golewski Energies
- Early Hydration Heat of Calcium Sulfoaluminate Cement with Influences of Supplementary Cementitious Materials and Water to Binder Ratio
- (2021) Jun Zhang et al. Materials
- Granite Powder vs. Fly Ash for the Sustainable Production of Air-Cured Cementitious Mortars
- (2021) Adrian Chajec Materials
- Properties of multi-layer renders with fly ash and boiler slag admixtures for salt-laden masonry
- (2021) Danuta Barnat-Hunek et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of magnesium slag as a mineral admixture on the performance of concrete
- (2021) Guangxiang Ji et al. CONSTRUCTION AND BUILDING MATERIALS
- Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length – Using the crack tip tracking (CTT) method – In the fracture toughness examinations under Mode II, through digital image correlation
- (2021) Grzegorz Ludwik Golewski CONSTRUCTION AND BUILDING MATERIALS
- Compressive behavior and microstructural analysis of low and high volume fly ash concrete containing recycled concrete aggregate
- (2021) Yimeng Wei et al. European Journal of Environmental and Civil Engineering
- Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method
- (2021) Grzegorz Ludwik Golewski MEASUREMENT
- Strain energy release rate in combination with reinforcement isotropic solid model (SERIS): A new mixed-mode I/II criterion to investigate fracture behavior of orthotropic materials
- (2021) Zahra Khaji et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Microstructure development and autogenous shrinkage of mortars with C-S-H seeding and internal curing
- (2020) Mateusz Wyrzykowski et al. CEMENT AND CONCRETE RESEARCH
- Effect of Sodium Sulfate and C–S–H Seeds on the Reaction of Fly Ash with Different Amorphous Alumina Contents
- (2020) Fubing Zou et al. ACS Sustainable Chemistry & Engineering
- Effect of accelerated curing regimes on high volume Fly ash mixtures in precast manufacturing plants
- (2020) Hayder H. Alghazali et al. CEMENT AND CONCRETE RESEARCH
- Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition
- (2020) Grzegorz Ludwik Golewski Energies
- Properties of Fibrous Concrete Made with Plastic Optical Fibers from E-Waste
- (2020) Zbigniew Suchorab et al. Materials
- Evaluation of Cracking Patterns in Cement Composites—From Basics to Advances: A Review
- (2020) Maciej Szeląg Materials
- The acceleration mechanism of nano-C-S-H particles on OPC hydration
- (2020) Fang Wang et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of Fly Ash Additive on the Properties of Concrete with Slag Cement
- (2020) Anna Szcześniak et al. Materials
- Properties of fresh and hardened fly ash/slag based geopolymer concrete: A review
- (2020) Peng Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Nanoparticle-reinforced building materials with applications in civil engineering
- (2020) Peng Zhang et al. Advances in Mechanical Engineering
- Impact of modified kenaf fibers on shrinkage and cracking of cement pastes
- (2020) Aofei Guo et al. CONSTRUCTION AND BUILDING MATERIALS
- Foamed concrete containing fly ash: Properties and application to backfilling
- (2020) Yong-gui Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Improvement of Strength Parameters of Cement Matrix with the Addition of Siliceous Fly Ash by Using Nanometric C-S-H Seeds
- (2020) Bartosz Szostak et al. Energies
- Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages
- (2020) Grzegorz Ludwik Golewski Materials
- On the effect of internal friction on torsional and axial cyclic loading
- (2020) M. Mehdizadeh et al. INTERNATIONAL JOURNAL OF FATIGUE
- Preparation of calcium silicate hydrate seeds by means of mechanochemical method and its effect on the early hydration of cement
- (2019) Boyuan Wang et al. Advances in Mechanical Engineering
- A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads
- (2019) Grzegorz Ludwik Golewski COMPOSITE STRUCTURES
- Enhancement of early-age strength of the high content fly ash blended cement paste by sodium sulfate and C–S–H seeds towards a greener binder
- (2019) Fubing Zou et al. JOURNAL OF CLEANER PRODUCTION
- Development and application of a highly durable precast prestressed concrete slab deck using fly ash concrete
- (2019) Tuan Minh Ha et al. Structure and Infrastructure Engineering
- The effect of synthesis conditions on the efficiency of C-S-H seeds to accelerate cement hydration
- (2018) G. Land et al. CEMENT & CONCRETE COMPOSITES
- Nucleation seeding with calcium silicate hydrate – A review
- (2018) Elisabeth John et al. CEMENT AND CONCRETE RESEARCH
- A failure analysis of concrete composites incorporating fly ash during torsional loading
- (2018) T. Sadowski et al. COMPOSITE STRUCTURES
- Effect of curing time on the fracture toughness of fly ash concrete composites
- (2018) Grzegorz Ludwik Golewski COMPOSITE STRUCTURES
- Poisson’s Ratio of Closed-Cell Aluminium Foams
- (2018) Jaroslav Kováčik et al. Materials
- Effect of fly ash addition on the fracture toughness of plain concrete at third model of fracture
- (2017) Grzegorz Ludwik GOLEWSKI Journal of Civil Engineering and Management
- Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading
- (2017) Grzegorz Ludwik Golewski STRUCTURAL ENGINEERING AND MECHANICS
- Numerical simulation of tensile failure of concrete using Particle Flow Code (PFC)
- (2016) Hadi Haeri et al. Computers and Concrete
- Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test
- (2016) Xinhua Cai et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical and time-dependent properties of high-volume fly ash concrete for structural use
- (2016) Jelena Dragaš et al. MAGAZINE OF CONCRETE RESEARCH
- EFFECT OF SLAG CEMENT ON DRYING SHRINKAGE OF CONCRETE
- (2015) Jiqiu Yuan et al. ACI MATERIALS JOURNAL
- Use of nanocrystal seeding chemical admixture in improving Portland cement strength development: application for precast concrete industry
- (2014) K. Owens et al. Advances in Applied Ceramics
- The performance of Fly ash and Metakaolin concrete at elevated temperatures
- (2014) Abid Nadeem et al. CONSTRUCTION AND BUILDING MATERIALS
- A REVIEW OF THE POSSIBLE APPLICATIONS OF NANOTECHNOLOGY IN REFRACTORY CONCRETE
- (2010) Valentin Antonovič et al. Journal of Civil Engineering and Management
- Influence of Nucleation Seeding on the Hydration Mechanisms of Tricalcium Silicate and Cement
- (2009) Jeffrey J. Thomas et al. Journal of Physical Chemistry C
- Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar
- (2007) P. Chindaprasirt et al. CONSTRUCTION AND BUILDING MATERIALS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started