A novel use of hybrid Cryo-MQL system in improving the tribological characteristics of additively manufactured 316 stainless steel against 100 Cr6 alloy

Measurement and Analysis of Sustainable Indicators in Machining of ARMOX 500T Armor Steel

(2022) Mustafa Kuntoğlu   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Tribological and Corrosion Behavior of High Pressure Cold Sprayed Duplex 316 L Stainless Steel

(2022) Alessandro M. Ralls et al.   TRIBOLOGY INTERNATIONAL

Investigation of the performance of cermet tools in the turning of Haynes 25 superalloy under gaseous N2 and hybrid nanofluid cutting environments

(2022) Şenol Şirin   Journal of Manufacturing Processes

Experimental investigation on the effect of dry and multi-jet cryogenic cooling on the machinability and hole accuracy of CFRP composites

(2022) Chetan Agrawal et al.   Journal of Materials Research and Technology-JMR&T

Characteristics, High Temperature Wear and Oxidation Behavior of Boride Layer Grown on Nimonic 80A Ni-based Superalloy

(2021) Ali Günen et al.   SURFACE & COATINGS TECHNOLOGY

Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy

(2021) Üsame Ali Usca et al.   Materials

FEM analysis of thermal and residual stress profile in selective laser melting of 316L stainless steel

(2021) Saad Waqar et al.   Journal of Manufacturing Processes

Low-temperature aluminizing influence on degradation of nimonic 80A surface: Microstructure, wear and high temperature oxidation behaviors

(2021) Azmi Erdogan et al.   Surfaces and Interfaces

Friction maps and wear maps of Ag/MoS2/WS2 nanocomposite with different sliding speed and normal force

(2021) Xin Zhang et al.   TRIBOLOGY INTERNATIONAL

Development of tribological maps on borided AISI 316L stainless steel under ball-on-flat wet sliding conditions

(2021) R.A. García-León et al.   TRIBOLOGY INTERNATIONAL

Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718

(2021) Mohd Danish et al.   TRIBOLOGY INTERNATIONAL

The Effects of MQL and Dry Environments on Tool Wear, Cutting Temperature, and Power Consumption during End Milling of AISI 1040 Steel

(2021) Emin Salur et al.   Metals

Effects of hybrid nanofluids on machining performance in MQL-milling of Inconel X-750 superalloy

(2021) Şenol Şirin et al.   Journal of Manufacturing Processes

Numerical and experimental investigations of built orientation dependent Johnson–Cook model for selective laser melting manufactured AlSi10Mg

(2021) Murat Aktürk et al.   Journal of Materials Research and Technology-JMR&T

Verification of Johnson-Cook parameters of ferritic stainless steel by drilling process: experimental and finite element simulations

(2020) Mehmet Erdi Korkmaz   Journal of Materials Research and Technology-JMR&T

Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique

(2020) Navneet Khanna et al.   Journal of Materials Research and Technology-JMR&T

Microstructure evolution and wear behavior of titanium alloy under cryogenic dry sliding wear condition

(2020) Zeju Weng et al.   MATERIALS CHARACTERIZATION

Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel

(2020) Oğuzhan Öndin et al.   TRIBOLOGY INTERNATIONAL

Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties

(2020) Radoslaw W. Maruda et al.   TRIBOLOGY INTERNATIONAL

Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel

(2020) Saad Waqar et al.   RAPID PROTOTYPING JOURNAL

Numerical investigation of thermal behavior and melt pool morphology in multi-track multi-layer selective laser melting of the 316L steel

(2020) Saad Waqar et al.   The International Journal of Advanced Manufacturing Technology

Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions

(2020) R.A. García-León et al.   MATERIALS LETTERS

Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining

(2020) Chetan Agrawal et al.   TRIBOLOGY INTERNATIONAL

Tribological behavior of WC-6Co against Ti–6Al–4V alloy under novel cryogenic ethanol-ester oil dry-ice hybrid lubri-cooling

(2020) Muhammad Jamil et al.   TRIBOLOGY INTERNATIONAL

Determination and Verification of Johnson–Cook Parameters for 430 Ferritic Steels via Different Gage Lengths

(2019) Mehmet Erdi Korkmaz   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting

(2019) Tianlin Zhong et al.   MATERIALS & DESIGN

Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy

(2019) Şenol Şirin et al.   TRIBOLOGY INTERNATIONAL

Tribological performance of selective laser melted 316L stainless steel

(2018) Hua Li et al.   TRIBOLOGY INTERNATIONAL

Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions

(2017) Radoslaw W. Maruda et al.   WEAR

Prediction of sliding speed and normal force effects on friction and wear rate evolution in a dry oscillating-fretting PTFE/Ti-6Al-4V contact

(2017) S. Toumi et al.   WEAR

Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy

(2016) Murat Sarıkaya et al.   JOURNAL OF CLEANER PRODUCTION

Tribology of selective laser melting processed parts: Stainless steel 316L under lubricated conditions

(2016) Y. Zhu et al.   WEAR

Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25

(2015) Murat Sarıkaya et al.   JOURNAL OF CLEANER PRODUCTION

Experimental investigation on tribological behaviour of Al-TiCp composite under sliding wear conditions

(2015) Sravan Kumar Josyula et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel

(2013) Y. Sun et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting

(2013) Chunze Yan et al.   MATERIALS & DESIGN

Wear characteristics of titanium alloy Ti54 for cryogenic sliding applications

(2010) N.S.M. El-Tayeb et al.   TRIBOLOGY INTERNATIONAL

Wear maps for low temperature carburised 316L austenitic stainless steel sliding against alumina

(2009) L. J. O'Donnell et al.   SURFACE ENGINEERING

Wear and corrosion behaviours of extruded Al–12Si–XMg alloys

(2008) Hayrettin Ahlatci   MATERIALS LETTERS