Microstructural characteristics and tribological behavior of an additively manufactured Ti-6Al-4V alloy under direct aging and solution-aging treatments

Flow behavior and dynamic transformation of bimodal TC17 titanium alloy during high strain rate hot compression

(2022) Yangbo Yu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions

(2022) Jinlong Su et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and room-temperature tensile property of Ti-5.7Al-4.0Sn-3.5Zr-0.4Mo-0.4Si-0.4Nb-1.0Ta-0.05C with near equiaxed β grain fabricated by laser directed energy deposition technique

(2021) MengCheng Deng et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Improvements in tribological and anticorrosion performance of porous Ti-6Al-4V via PEO coating

(2021) C. Garcia-Cabezón et al.   Friction

Dislocation hardening and phase transformation-induced high ductility in Ti-6Al-4V with a heterogeneous martensitic microstructure under tensile load

(2021) Hao Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation behavior of α2 phase and its influence on mechanical properties of binary Ti-8Al alloy

(2021) Sabry S. Youssef et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Sliding speed influence on the tribo-corrosion behaviour of Ti6Al4V alloy in simulated body fluid

(2021) Righdan Namus et al.   TRIBOLOGY INTERNATIONAL

Effect of heat treatment on microstructure and tribological behavior of Ti–6Al–4V alloys fabricated by selective laser melting

(2021) Jiang Ju et al.   TRIBOLOGY INTERNATIONAL

Effect of Heat Treatment on the Wear Properties of Selective Laser Melted Ti–6Al–4V Alloy Under Different Loads

(2021) Lu Yao et al.   Acta Metallurgica Sinica-English Letters

Superior strength-ductility in laser aided additive manufactured high-strength steel by combination of intrinsic tempering and heat treatment

(2021) Chaolin Tan et al.   Virtual and Physical Prototyping

Progress and perspectives in laser additive manufacturing of key aeroengine materials

(2021) Chaolin Tan et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Insights into the wear behaviour of electron beam melted Ti–6Al–4V alloy in the as-built and the heat-treated conditions

(2021) Deepak Sharma et al.   Journal of Manufacturing Processes

Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy

(2021) Jinlong Su et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures

(2020) B. Callegari et al.   MATERIALS CHARACTERIZATION

Corrosion-wear behavior of a biocompatible magnesium matrix composite in simulated body fluid

(2020) Jinlong Su et al.   Friction

Advancement of tribological properties of Ti–6Al–4V alloy fabricated by selective laser melting

(2020) Auezhan Amanov   TRIBOLOGY INTERNATIONAL

Unravelling the precipitation evolutions of AZ80 magnesium alloy during non-isothermal and isothermal processes

(2020) Longqing Tang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Electrochemical corrosion and anisotropic tribological properties of bioinspired hierarchical morphologies on Ti-6Al-4V fabricated by laser texturing

(2019) Yong Xu et al.   TRIBOLOGY INTERNATIONAL

Tribology of Ti6Al4V: A review

(2019) Jibin T Philip et al.   Friction

A tribological investigation of SLM fabricated TC4 titanium alloy with carburization pre-treatment

(2019) Wenlong Yang et al.   CERAMICS INTERNATIONAL

Effect of dislocation distribution on the yield stress in ferritic steel under identical dislocation density conditions

(2019) Yuki Tanaka et al.   SCRIPTA MATERIALIA

Effect of load on friction and wear behaviors of alumina matrix ceramic guideway materials

(2018) Changxia Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characterization of the Isothermal Precipitation Kinetics of an Al-Zn-Mg-Cu Alloy

(2018) Fulin Jiang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Additive manufacturing of Ti6Al4V alloy: A review

(2018) Shunyu Liu et al.   MATERIALS & DESIGN

Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy

(2017) Fei Weng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improving the wear and corrosion resistance of Ti–6Al–4V alloy by deposition of TiSiN nanocomposite coating with pulsed-DC PACVD

(2017) Farid Movassagh-Alanagh et al.   WEAR

Effects of working gas on wear and corrosion resistances of cold sprayed Ti-6Al-4V coatings

(2016) N.W. Khun et al.   SURFACE & COATINGS TECHNOLOGY

Effects of sliding velocity on tribo-oxides and wear behavior of Ti–6Al–4V alloy

(2015) X.X. Li et al.   TRIBOLOGY INTERNATIONAL

Dry Sliding Wear Behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy

(2014) L. Wang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Severe-to-Mild Wear Transition of Titanium Alloys as a Function of Temperature

(2014) L. Wang et al.   TRIBOLOGY LETTERS

The Influence of Precipitation of Alpha2 on Properties and Microstructure in TIMETAL 6-4

(2012) Zhiwei Wu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Wear Characteristics of Ti-6Al-4V Alloy at 20–400°C

(2012) X. H. Cui et al.   TRIBOLOGY TRANSACTIONS

Tribo-layer and its role in dry sliding wear of Ti–6Al–4V alloy

(2012) Y.S. Mao et al.   WEAR

Experimental study of friction in sheet metal forming

(2011) L. Figueiredo et al.   WEAR