Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens

Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses

(2020) Tianyun Yao et al.   COMPOSITES PART B-ENGINEERING

The effect of in-plane layer orientation on mixed-mode I-II fracture behavior of 3D-printed poly-carbonate specimens

(2020) Bahador Bahrami et al.   ENGINEERING FRACTURE MECHANICS

Mode I and II fracture toughness investigation of Laser-Sintered Polyamide

(2020) Emanoil Linul et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Mode I Fracture Toughness of Polyamide and Alumide Samples obtained by Selective Laser Sintering Additive Process

(2020) Dan Ioan Stoia et al.   Polymers

The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimens

(2020) Majid R. Ayatollahi et al.   ENGINEERING FRACTURE MECHANICS

Laser-based additively manufactured polymers: a review on processes and mechanical models

(2020) Roberto Brighenti et al.   Journal of Materials Science

Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering

(2019) Dan Stoia et al.   Materials

Four-point bending tests for the fracture properties of concrete

(2019) Yangyang Yin et al.   ENGINEERING FRACTURE MECHANICS

PA12 Powder Recycled from SLS for FDM

(2019) Li Feng et al.   Polymers

Mechanical and morphological characterization of spherical cell porous structures manufactured using FDM process

(2019) N. Ben Ali et al.   ENGINEERING FRACTURE MECHANICS

Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

(2019) Wang et al.   Polymers

Analysis of PLA Geometric Properties Processed by FFF Additive Manufacturing: Effects of Process Parameters and Plate-Extruder Precision Motion

(2019) Eustaquio García Plaza et al.   Polymers

Fracture load prediction under mixed mode I + II using a stress based method for brittle materials tested with the asymmetric four-point bend specimen

(2019) M.R.M. Aliha et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Correlations between Process Parameters and Outcome Properties of Laser-Sintered Polyamide

(2019) Dan Ioan Stoia et al.   Polymers

Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses

(2019) Yu Zhao et al.   MATERIALS & DESIGN

Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup

(2019) Josef Kiendl et al.   COMPOSITES PART B-ENGINEERING

Mode I J-integral of extruded polystyrene measured by the four-point single-edge notched bending test

(2019) Hiroshi Yoshihara et al.   ENGINEERING FRACTURE MECHANICS

Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

(2018) Florian Arbeiter et al.   POLYMER TESTING

Mode II fracture characterization of wood using the Four-Point End-Notched Flexure (4ENF) test

(2018) M.F.S.F. de Moura et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis

(2018) Adrián Rodríguez-Panes et al.   Materials

Static assessment of plain/notched polylactide (PLA) 3D-printed with different infill levels: Equivalent homogenised material concept and Theory of Critical Distances

(2018) Adnan A. Ahmed et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts

(2017) Jason T. Cantrell et al.   RAPID PROTOTYPING JOURNAL

Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens

(2017) S.M.J. Razavi et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review

(2016) Shady Farah et al.   ADVANCED DRUG DELIVERY REVIEWS

Mathematical modeling and FDM process parameters optimization using response surface methodology based on Q-optimal design

(2016) Omar Ahmed Mohamed et al.   APPLIED MATHEMATICAL MODELLING

Experimental and numerical crack paths in PUR foams

(2016) Liviu Marsavina et al.   ENGINEERING FRACTURE MECHANICS

On the I-II mixed mode fracture of granite using four-point bend specimen

(2016) C. Wang et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques

(2016) Michael Dawoud et al.   Journal of Manufacturing Processes

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

(2015) Omar A. Mohamed et al.   Advances in Manufacturing

On the use of an anti-symmetric four-point bend specimen for mode II fracture experiments

(2011) M. R. AYATOLLAHI et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Bimaterial Four Point Bend Specimen with Sub-Interface Crack

(2010) Liviu Marsavina et al.   INTERNATIONAL JOURNAL OF FRACTURE