Micromechanical Modeling of AlSi10Mg Processed by Laser-Based Additive Manufacturing: From as-Built to Heat-Treated Microstructures

Heat treatment of aluminium alloys produced by laser powder bed fusion: A review

(2021) J. Fiocchi et al.   MATERIALS & DESIGN

Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy

(2021) X.X. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg

(2021) P. Van Cauwenbergh et al.   Scientific Reports

On the influence of build orientation on properties of friction stir welded Al–Si10Mg parts produced by selective laser melting

(2021) G. Moeini et al.   Journal of Materials Research and Technology-JMR&T

CuCrZr processed by laser powder bed fusion—Processability and influence of heat treatment on electrical conductivity, microstructure and mechanical properties

(2021) Thomas Wegener et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Crystal plasticity simulation of the macroscale and microscale stress–strain relations of additively manufactured AlSi10Mg alloy

(2021) X.X. Zhang et al.   COMPUTATIONAL MATERIALS SCIENCE

Effect of Grain Statistics on Micromechanical Modeling: The Example of Additively Manufactured Materials Examined by Electron Backscatter Diffraction

(2020) Abhishek Biswas et al.   ADVANCED ENGINEERING MATERIALS

SciPy 1.0: fundamental algorithms for scientific computing in Python

(2020) Pauli Virtanen et al.   NATURE METHODS

Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components

(2020) Ghazal Moeini et al.   Metals

Optimized reconstruction of the crystallographic orientation density function based on a reduced set of orientations

(2020) Abhishek Biswas et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Inverse Method to Determine Fatigue Properties of Materials by Combining Cyclic Indentation and Numerical Simulation

(2020) Hafiz Muhammad Sajjad et al.   Materials

On the structural integrity of Fe-36Ni Invar alloy processed by selective laser melting

(2020) T. Wegener et al.   Additive Manufacturing

On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure

(2020) S. Picak et al.   ACTA MATERIALIA

Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selected laser melting: Crystal plasticity modeling

(2020) Wenjie Zhang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Effect of Friction Stir Processing on Microstructure and Mechanical Properties of AlSi10Mg Aluminum Alloy Produced by Selective Laser Melting

(2019) Tao Yang et al.   JOM

Microstructure of selective laser melted AlSi10Mg alloy

(2019) Xihe Liu et al.   MATERIALS & DESIGN

Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components

(2019) Abhishek Biswas et al.   ADVANCED ENGINEERING MATERIALS

3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting

(2019) Nesma T. Aboulkhair et al.   PROGRESS IN MATERIALS SCIENCE

Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions

(2019) Lv Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing

(2019) Juan Guillermo Santos Macías et al.   SCRIPTA MATERIALIA

Parameterization of a Non-local Crystal Plasticity Model for Tempered Lath Martensite Using Nanoindentation and Inverse Method

(2019) Jenni K. Engels et al.   Frontiers in Materials

Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment

(2018) Le Zhou et al.   MATERIALS CHARACTERIZATION

Micromechanics modeling of metallic alloys 3D printed by selective laser melting

(2018) Mohsen Taheri Andani et al.   MATERIALS & DESIGN

The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity

(2018) Veerappan Prithivirajan et al.   MATERIALS & DESIGN

Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy

(2018) N.O. Larrosa et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Friction stir processing of AlSi10Mg parts produced by selective laser melting

(2018) Ahmed H. Maamoun et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy

(2018) Z.H. Xiong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM

(2017) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments

(2017) Naoki Takata et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strength and strain hardening of a selective laser melted AlSi10Mg alloy

(2017) B. Chen et al.   SCRIPTA MATERIALIA

Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting

(2017) Pauline Delroisse et al.   SCRIPTA MATERIALIA

Microstructure and strength of selectively laser melted AlSi10Mg

(2016) J. Wu et al.   ACTA MATERIALIA

Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

(2016) Jyoti Suryawanshi et al.   ACTA MATERIALIA

Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction

(2016) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical behavior of additive manufactured, powder-bed laser-fused materials

(2016) Todd M. Mower et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by selective laser melting: A computational framework

(2016) Arman Ahmadi et al.   MATERIALS & DESIGN

Multi-level modelling of mechanical anisotropy of commercial pure aluminium plate: Crystal plasticity models, advanced yield functions and parameter identification

(2015) K. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development

(2015) Noriko Read et al.   MATERIALS & DESIGN

On the influence of isotropic and kinematic hardening caused by strain gradients on the deformation behaviour of polycrystals

(2013) Anxin Ma et al.   PHILOSOPHICAL MAGAZINE

Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder

(2012) Lore Thijs et al.   ACTA MATERIALIA

Determination of plastic material properties by analysis of residual imprint geometry of indentation

(2012) Benjamin Schmaling et al.   JOURNAL OF MATERIALS RESEARCH

NIH Image to ImageJ: 25 years of image analysis

(2012) Caroline A Schneider et al.   NATURE METHODS

Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior

(2011) Erhard Brandl et al.   MATERIALS & DESIGN

Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm

(2011) Florian Bachmann et al.   ULTRAMICROSCOPY

Selective laser melting of aluminium components

(2010) Eleftherios Louvis et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications

(2009) F. Roters et al.   ACTA MATERIALIA

Effect of trace La addition on the microstructures and mechanical properties of A356 (Al–7Si–0.35Mg) aluminum alloys

(2009) Yu-Chou Tsai et al.   JOURNAL OF ALLOYS AND COMPOUNDS