Heat treatment of aluminium alloys produced by laser powder bed fusion: A review
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Heat treatment of aluminium alloys produced by laser powder bed fusion: A review
Authors
Keywords
Laser powder bed fusion, Selective laser melting, Aluminium alloys, Heat treatment, Microstructure, Mechanical behaviour
Journal
MATERIALS & DESIGN
Volume -, Issue -, Pages 109651
Publisher
Elsevier BV
Online
2021-03-11
DOI
10.1016/j.matdes.2021.109651
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Fabrication and Characterization of the Modified EV31-Based Metal Matrix Nanocomposites
- (2021) Seyed Kiomars Moheimani et al. Metals
- Influence of printing parameters on structures, mechanical properties and surface characterization of aluminium alloy manufactured using selective laser melting
- (2020) Rajkumar Subbiah et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhanced strength of the selective laser melted Al-Mg-Sc-Zr alloy by cold rolling
- (2020) Rulong Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys
- (2020) Leonhard Hitzler et al. Materials
- Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting
- (2020) S. Griffiths et al. ACTA MATERIALIA
- Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting
- (2020) Han Zhang et al. APPLIED SURFACE SCIENCE
- Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties
- (2020) F. Alghamdi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al–Mn–Sc alloy fabricated by selective laser melting
- (2020) Qingbo Jia et al. ACTA MATERIALIA
- Anisotropic corrosion behavior of Sc and Zr modified Al-Mg alloy produced by selective laser melting
- (2020) Dongdong Gu et al. CORROSION SCIENCE
- Effect of Al3(Sc, Zr) and Mg2Si precipitates on microstructure and tensile properties of selective laser melted Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy
- (2020) Jiang Bi et al. INTERMETALLICS
- Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy
- (2020) A. Tridello et al. INTERNATIONAL JOURNAL OF FATIGUE
- Manipulating the microstructure and tensile properties of selective laser melted Al–Mg-Sc-Zr alloy through heat treatment
- (2020) Rulong Ma et al. JOURNAL OF ALLOYS AND COMPOUNDS
- An additively manufactured Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy with high specific strength, good thermal stability and excellent corrosion resistance
- (2020) Jiang Bi et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion
- (2020) Jiang Bi et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Mechanical behavior and microstructure evolution of Al-Cu-Mg alloy produced by laser powder bed fusion: Effect of heat treatment
- (2020) Yang Qi et al. MATERIALS CHARACTERIZATION
- Effect of a New High-Pressure Heat Treatment on Additively Manufactured AlSi10Mg Alloy
- (2020) Marialaura Tocci et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Modulating the damping capacity of SLMed AlSi10Mg trough stress-relieving thermal treatments
- (2020) C. Colombo et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Relation between heat treatment processes and microstructural characteristics of 7075 Al alloy fabricated by SLM
- (2020) Jia-ying Hu et al. VACUUM
- A Review of Heat Treatments on Improving the Quality and Residual Stresses of the Ti–6Al–4V Parts Produced by Additive Manufacturing
- (2020) Óscar Teixeira et al. Metals
- Mechanical properties of AlSi10Mg lattice structures fabricated by selective laser melting
- (2020) Zhong-hua Li et al. MATERIALS & DESIGN
- Selective laser melting of high-strength primary AlSi9Cu3 alloy: Processability, microstructure, and mechanical properties
- (2020) J. Fiocchi et al. MATERIALS & DESIGN
- Processing parameters in laser powder bed fusion metal additive manufacturing
- (2020) J.P. Oliveira et al. MATERIALS & DESIGN
- Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles
- (2020) Qiyang Tan et al. ACTA MATERIALIA
- Corrosion of Al-3.5Cu-1.5 Mg–1Si alloy prepared by selective laser melting and heat treatment
- (2020) Pei Wang et al. INTERMETALLICS
- Mechanical Properties of SLM-Printed Aluminium Alloys: A Review
- (2020) Panneer Ponnusamy et al. Materials
- Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: New microstructure description indices and fracture mechanisms
- (2020) Qian Liu et al. ACTA MATERIALIA
- Microstructure and mechanical properties of a TiB2-modified Al–Cu alloy processed by laser powder-bed fusion
- (2020) P. Mair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Uncovering the roles of LaB6-nanoparticle inoculant in the AlSi10Mg alloy fabricated via selective laser melting
- (2020) Qiyang Tan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of different heat-treatment routes on the impact properties of an additively manufactured AlSi10Mg alloy
- (2020) Maverick Giovagnoli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterising the Microstructure of an Additively Built Al-Cu-Li Alloy
- (2020) Iris Raffeis et al. Materials
- Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM
- (2020) Peng Liu et al. Journal of Manufacturing Processes
- Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties
- (2020) C. Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Structure and mechanical properties of an advanced aluminium alloy AlSi10MgCu(Ce,Zr) produced by selective laser melting
- (2020) N.V. Dynin et al. MATERIALS LETTERS
- New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
- (2019) Alberta Aversa et al. Materials
- A new modification effect of eutectic Si in selective laser melted AlSi10Mg
- (2019) Jing Sun et al. MATERIALS SCIENCE AND TECHNOLOGY
- Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting
- (2019) Quanquan Han et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Statistical approach for electrochemical evaluation of the effect of heat treatments on the corrosion resistance of AlSi10Mg alloy by laser powder bed fusion
- (2019) M. Cabrini et al. ELECTROCHIMICA ACTA
- The influence of post‐heat treatments on the tensile strength and surface hardness of selectively laser‐melted AlSi10Mg
- (2019) S. Heilgeist et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Corrosion Behavior of Selective Laser Melted AlSi10Mg Alloy in NaCl Solution and Its Dependence on Heat Treatment
- (2019) Xin-Hui Gu et al. Acta Metallurgica Sinica-English Letters
- Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms
- (2019) Qingbo Jia et al. ACTA MATERIALIA
- Effects of Heat Treatments on Compressive Deformation Behaviors of Lattice‐Structured AlSi10Mg Alloy Fabricated by Selective Laser Melting
- (2019) Asuka Suzuki et al. ADVANCED ENGINEERING MATERIALS
- Improving fatigue performances of selective laser melted Al-7Si-0.6Mg alloy via defects control
- (2019) Jeremy H. Rao et al. INTERNATIONAL JOURNAL OF FATIGUE
- VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment
- (2019) A. Tridello et al. INTERNATIONAL JOURNAL OF FATIGUE
- Heat treatment influences densification and porosity of AlSi10Mg alloy thin-walled parts manufactured by selective laser melting technique
- (2019) Arfan Majeed et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Effect of solid solution plus double aging on microstructural characterization of 7075 Al alloys fabricated by selective laser melting (SLM)
- (2019) Siyu Sun et al. OPTICS AND LASER TECHNOLOGY
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- Towards a high strength aluminium alloy development methodology for selective laser melting
- (2019) Qingbo Jia et al. MATERIALS & DESIGN
- Fatigue crack growth behavior of a selective laser melted AlSi10Mg
- (2019) Maria Teresa Di Giovanni et al. ENGINEERING FRACTURE MECHANICS
- Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy
- (2019) Andrea Tridello et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Abnormal corrosion behavior of selective laser melted AlSi10Mg alloy induced by heat treatment at 300 °C
- (2019) Xinhui Gu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Development of a high strength Al–Zn–Si–Mg–Cu alloy for selective laser melting
- (2019) R. Casati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure evolution during selective laser melting of metallic materials: A review
- (2019) Xing Zhang et al. JOURNAL OF LASER APPLICATIONS
- Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
- (2019) J.P. Oliveira et al. PROGRESS IN MATERIALS SCIENCE
- Tribological properties of selective laser melted Al 12Si alloy
- (2019) Hemant J. Rathod et al. TRIBOLOGY INTERNATIONAL
- Metal additive manufacturing in the commercial aviation industry: A review
- (2019) Annamaria Gisario et al. JOURNAL OF MANUFACTURING SYSTEMS
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of build orientation on fracture and tensile behavior of A357 Al alloy processed by Selective Laser Melting
- (2019) João Teixeira Oliveira de Menezes et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Heat treatment effects on microstructure-residual stress for selective laser melting AlSi10Mg
- (2019) Xiaohui Jiang et al. MATERIALS SCIENCE AND TECHNOLOGY
- The Effect of Stress Relief on the Mechanical and Fatigue Properties of Additively Manufactured AlSi10Mg Parts
- (2019) Mfusi et al. Metals
- Selective laser melted Al-7Si-0.6Mg alloy with in-situ precipitation via platform heating for residual strain removal
- (2019) Jeremy H. Rao et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content
- (2019) A Yu Churyumov et al. Materials Research Express
- Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys
- (2019) Zan Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A heat treatable TiB 2 /Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
- (2018) P. Wang et al. COMPOSITES PART B-ENGINEERING
- Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys
- (2018) T. Mukherjee et al. COMPUTATIONAL MATERIALS SCIENCE
- Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg
- (2018) Changchun Zhang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Selective laser melting of AlSi10 Mg: Influence of process parameters on Mg 2 Si precipitation and Si spheroidization
- (2018) C.A. Biffi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy
- (2018) Silvia Marola et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
- (2018) Y.J. Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples
- (2018) Xiaojia Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
- (2018) Michaela Fousová et al. MATERIALS CHARACTERIZATION
- Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
- (2018) Le Zhou et al. MATERIALS CHARACTERIZATION
- Microstructure and properties of novel AlSi11CuMn alloy manufactured by selective laser melting
- (2018) A.V. Pozdniakov et al. MATERIALS LETTERS
- Deformation mechanism during dynamic loading of an additively manufactured AlSi10Mg_200C
- (2018) Amir Hadadzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
- (2018) Pei Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
- (2018) I. Rosenthal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
- (2018) Kun V. Yang et al. SCRIPTA MATERIALIA
- Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
- (2018) Donghua Dai et al. VACUUM
- Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion
- (2018) Marina Cabrini et al. Materials
- Laser Powder Bed Fusion of a High Strength Al-Si-Zn-Mg-Cu Alloy
- (2018) Alberta Aversa et al. Metals
- Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
- (2018) Shiwen Liu et al. MATERIALS & DESIGN
- On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
- (2018) Sara Bagherifard et al. MATERIALS & DESIGN
- Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS & DESIGN
- Process optimization and mechanical property evolution of AlSiMg0.75 by selective laser melting
- (2018) Yuchao Bai et al. MATERIALS & DESIGN
- Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
- (2018) A.B. Spierings et al. MATERIALS & DESIGN
- A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
- (2018) Jinliang Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
- (2018) Longchao Zhuo et al. MATERIALS LETTERS
- Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment
- (2018) L.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
- (2018) N.O. Larrosa et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Dynamic loading of direct metal laser sintered AlSi10Mg alloy: Strengthening behavior in different building directions
- (2018) Amir Hadadzadeh et al. MATERIALS & DESIGN
- Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy
- (2018) Z.H. Xiong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
- (2018) Amir Hadadzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy
- (2018) Min Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
- (2018) Luca Girelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Properties of Novel Heat Resistant Al–Ce–Cu Alloy for Additive Manufacturing
- (2018) D. R. Manca et al. METALS AND MATERIALS INTERNATIONAL
- Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting
- (2018) Riccardo Casati et al. Metals
- Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting
- (2018) Jeremy H. Rao et al. SCRIPTA MATERIALIA
- Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting
- (2018) Dario Rafael Manca et al. MATERIALS LETTERS
- Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg
- (2018) Tim Rubben et al. CORROSION SCIENCE
- Coarsening of Al3Sc precipitates in Al-Mg-Sc alloys
- (2018) Pian Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting
- (2017) Y.D. Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
- (2017) P. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Low temperature annealing dedicated to AlSi10Mg selective laser melting products
- (2017) J. Fiocchi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Direction and location dependency of selective laser melted AlSi10Mg specimens
- (2017) Leonhard Hitzler et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High and very high cycle fatigue failure mechanisms in selective laser melted aluminum alloys
- (2017) Shafaqat Siddique et al. JOURNAL OF MATERIALS RESEARCH
- Selective Laser Melting of an Al–Fe–V–Si Alloy: Microstructural Evolution and Thermal Stability
- (2017) Shao-Bo Sun et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Galvanostatic Anodizing of Additive Manufactured Al-Si10-Mg Alloy
- (2017) Reynier I. Revilla et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Characterization of the microstructure of a selective laser melting processed Al-50Si alloy: Effect of heat treatments
- (2017) Nan Kang et al. MATERIALS CHARACTERIZATION
- SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment
- (2017) A.B. Spierings et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
- (2017) Naoki Takata et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermal and Mechanical Properties of Commercial-Purity Aluminum Fabricated Using Selective Laser Melting
- (2017) Takahiro Kimura et al. MATERIALS TRANSACTIONS
- Selective laser melting of aluminum alloys
- (2017) Nesma T. Aboulkhair et al. MRS BULLETIN
- Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy
- (2017) E.M. Elgallad et al. PHYSICA B-CONDENSED MATTER
- Selective laser melting of nickel powder
- (2017) Chor Yen Yap et al. RAPID PROTOTYPING JOURNAL
- Strength and strain hardening of a selective laser melted AlSi10Mg alloy
- (2017) B. Chen et al. SCRIPTA MATERIALIA
- Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting
- (2017) Pauline Delroisse et al. SCRIPTA MATERIALIA
- Effects of Process Conditions on the Mechanical Behavior of Aluminium Wrought Alloy EN AW-2219 (AlCu6Mn) Additively Manufactured by Laser Beam Melting in Powder Bed
- (2017) Michael Karg et al. Micromachines
- Effect of Process and Post-Process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion
- (2017) Alberta Aversa et al. Metals
- Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
- (2017) A.B. Spierings et al. MATERIALS & DESIGN
- Microstructure and strength of selectively laser melted AlSi10Mg
- (2016) J. Wu et al. ACTA MATERIALIA
- Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys
- (2016) J. Taendl et al. ACTA MATERIALIA
- Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
- (2016) Jyoti Suryawanshi et al. ACTA MATERIALIA
- Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
- (2016) Mary Kathryn Thompson et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy
- (2016) M. Cabrini et al. ELECTROCHIMICA ACTA
- Influence of surface and internal casting defects on the fatigue behaviour of A357-T6 cast aluminium alloy
- (2016) I. Serrano-Munoz et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure and phase formation in Al–20Si–5Fe–3Cu–1Mg synthesized by selective laser melting
- (2016) Pan Ma et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Changing the alloy composition of Al7075 for better processability by selective laser melting
- (2016) Maria L. Montero-Sistiaga et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
- (2016) Wei Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
- (2016) Nesma T. Aboulkhair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of vacuum annealing treatment on microstructures and residual stress of AlSi10Mg parts produced by selective laser melting process
- (2016) Tian Chen et al. MODERN PHYSICS LETTERS B
- Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
- (2016) Nesma T. Aboulkhair et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
- (2016) U. Tradowsky et al. MATERIALS & DESIGN
- Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
- (2016) Takahiro Kimura et al. MATERIALS & DESIGN
- A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
- (2015) X.P. Li et al. ACTA MATERIALIA
- Atomic-scale pathway of early-stage precipitation in Al–Mg–Si alloys
- (2015) Vahid Fallah et al. ACTA MATERIALIA
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting
- (2015) Shafaqat Siddique et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
- (2015) Nesma T. Aboulkhair et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- Application study of AlSi10Mg alloy by selective laser melting: physical and mechanical properties, microstructure, heat treatments and manufacturing of aluminium metallic matrix composite (MMC)
- (2015) Arnold Mauduit et al. Metallurgical Research & Technology
- Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder
- (2014) Yali Li et al. MATERIALS & DESIGN
- Effects of external stress aging on morphology and precipitation behavior of θ″ phase in Al-Cu alloy
- (2014) Shang FU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
- (2014) Pan Ma et al. Metals
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
- (2013) K.G. Prashanth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- Solute nanostructures and their strengthening effects in Al–7Si–0.6Mg alloy F357
- (2011) G. Sha et al. ACTA MATERIALIA
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Investigation on θ′ precipitate thickening in 2519A-T87 aluminum alloy plate impacted
- (2008) Zhi-guo Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search