Mechanical and tribological properties of anodic Al coatings as a function of anodizing conditions

Effect of Er on Microstructure and Mechanical Properties of 5052 Aluminum Alloy with Big Width-To-Thickness Ratio

(2020) Xinwei She et al.   Materials

Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy

(2020) Michaela Remešová et al.   APPLIED SURFACE SCIENCE

Rapid fabrication of iridescent alumina films supported on an aluminium substrate by high voltage anodization

(2020) Chunxin Sun et al.   OPTICAL MATERIALS

Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization

(2020) Deekshant Varshney et al.   Ain Shams Engineering Journal

Geometrical, microstructural and mechanical characterization of pulse laser welded thin sheet 5052-H32 aluminium alloy for aerospace applications

(2019) T.E. ABIOYE et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Complex influence of temperature on oxalic acid anodizing of aluminium

(2019) A.P. Leontiev et al.   ELECTROCHIMICA ACTA

Microstructure, mechanical and corrosion properties of cryorolled-AA5052 at various solution treatment temperatures

(2019) N M Anas et al.   Materials Research Express

Effects of oxygen evolution on the voltage and film morphology during galvanostatic anodizing of AA 2024-T3 aluminium alloy in sulphuric acid at −2 and 24 °C

(2018) J.M. Torrescano-Alvarez et al.   ELECTROCHIMICA ACTA

Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding

(2018) S. Shanavas et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Ultra-thin and strong formvar-based membranes with controlled porosity for micro- and nano-scale systems

(2018) Eric Auchter et al.   NANOTECHNOLOGY

Morphology perspective on chromic acid anodizing replacement by thin film sulfuric acid anodizing

(2018) Zhongfen Ding et al.   SURFACE & COATINGS TECHNOLOGY

Optimization of mechanical properties for pulsed anodizing of aluminum

(2017) M. Roshani et al.   SURFACE & COATINGS TECHNOLOGY

Anodizing of multiphase aluminium alloys in sulfuric acid: in-situ electrochemical behaviour and oxide properties

(2016) Delphine Veys-Renaux et al.   ELECTROCHIMICA ACTA

Microstructure and mechanical properties of resistance-spot-welded joints for A5052 aluminum alloy and DP 600 steel

(2016) Jianbin Chen et al.   MATERIALS CHARACTERIZATION

Fabrication of Corrosion Resistance Micro-Nanostructured Superhydrophobic Anodized Aluminum in a One-Step Electrodeposition Process

(2016) Ying Huang et al.   Metals

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

(2015) Yuanjing Lin et al.   Nanoscale Research Letters

Friction coefficient and microhardness of anodized aluminum alloys under different elaboration conditions

(2015) M. GUEZMIL et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

(2015) Yuanjing Lin et al.   Nanoscale Research Letters

Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures

(2014) G. Meschut et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Mechanical and frictional behaviour of nano-porous anodised aluminium

(2014) N. Tsyntsaru et al.   MATERIALS CHEMISTRY AND PHYSICS

Tribological analysis of thin films by pin-on-disc: Evaluation of friction and wear measurement uncertainty

(2014) R. Novak et al.   TRIBOLOGY INTERNATIONAL

Effect of temperature on the anodizing process of aluminum alloy AA 5052

(2013) S. Theohari et al.   APPLIED SURFACE SCIENCE

Enhancing aluminum corrosion resistance by two-step anodizing process

(2013) L. Bouchama et al.   SURFACE & COATINGS TECHNOLOGY

Anodizing of 2024-T3 aluminum alloy in sulfuric-boric-phosphoric acids and its corrosion behavior

(2013) M. SAEEDIKHANI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

On conversion coating treatments to replace chromating for Al alloys: Recent developments and possible future directions

(2012) S. A. Kulinich et al.   Russian Journal of Non-Ferrous Metals

Characterization of aluminum anodized layers modified in sulfuric and phosphoric acid baths and their effect on conventional electrolytic coloring

(2011) A. Hakimizad et al.   SURFACE & COATINGS TECHNOLOGY

Effect of alkaline cleaning and activation on aluminum alloy 7075-T6

(2010) Simon Joshi et al.   APPLIED SURFACE SCIENCE

Thick and Dense Anodic Oxide Layers Formed on Aluminum in Sulphuric Acid Bath

(2010) W. Bensalah et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Investigation of wear behavior of titanium oxide films, produced by anodic oxidation, on commercially pure titanium in vacuum conditions

(2010) A.F. Yetim   SURFACE & COATINGS TECHNOLOGY

Deformation of anodic aluminum oxide nano-honeycombs during nanoindentation

(2009) K.Y. Ng et al.   ACTA MATERIALIA

Comparative study of mechanical and tribological properties of alumina coatings formed on aluminium in various conditions

(2009) W. Bensalah et al.   MATERIALS & DESIGN

Effect of surface roughness on nanoindentation test of thin films

(2008) Wu-Gui Jiang et al.   ENGINEERING FRACTURE MECHANICS

Investigation of the pore formation in anodic aluminium oxide

(2008) Zixue Su et al.   JOURNAL OF MATERIALS CHEMISTRY

Effect of processing parameters on pore structure and thickness of anodic aluminum oxide (AAO) tubular membranes

(2008) A BELWALKAR et al.   JOURNAL OF MEMBRANE SCIENCE

Structural engineering of nanoporous anodic aluminium oxide by pulse anodization of aluminium

(2008) Woo Lee et al.   Nature Nanotechnology