Additive manufacturing of polymer-derived ceramics: Materials, technologies, properties and potential applications
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Additive manufacturing of polymer-derived ceramics: Materials, technologies, properties and potential applications
Authors
Keywords
-
Journal
PROGRESS IN MATERIALS SCIENCE
Volume 128, Issue -, Pages 100969
Publisher
Elsevier BV
Online
2022-05-25
DOI
10.1016/j.pmatsci.2022.100969
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics
- (2022) Max Kollep et al. ADVANCED ENGINEERING MATERIALS
- Additive manufacturing of ceramic materials for energy applications: Road map and opportunities
- (2022) Corson L. Cramer et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Novel 3D grid porous Li4Ti5O12 thick electrodes fabricated by 3D printing for high performance lithium-ion batteries
- (2022) Changyong Liu et al. Journal of Advanced Ceramics
- Additive manufacturing of thin electrolyte layers via inkjet printing of highly-stable ceramic inks
- (2021) Zhongqi Zhu et al. Journal of Advanced Ceramics
- Photopolymerization-based additive manufacturing of ceramics: A systematic review
- (2021) Sefiu Abolaji Rasaki et al. Journal of Advanced Ceramics
- SiOC(N) Cellular Structures with Dense Struts by Integrating Fused Filament Fabrication 3D Printing with Polymer‐Derived Ceramics
- (2021) Apoorv Kulkarni et al. ADVANCED ENGINEERING MATERIALS
- Additive manufacturing of SiOC scaffolds with tunable structure-performance relationship
- (2021) Kai Huang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Optimized preceramic polymer for 3D structured ceramics via fused deposition modeling
- (2021) Lianzhong Zhao et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review
- (2021) S.A. Rasaki et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Embedded direct ink writing of freeform ceramic components
- (2021) Kai Huang et al. Applied Materials Today
- Additive manufacturing and direct synthesis of sphene ceramic scaffolds from a silicone resin and reactive fillers
- (2021) Hamada Elsayed et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology
- (2021) Fateme Sarraf et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Enhanced electromagnetic microwave absorption of SiOC ceramics targeting the integration of structure and function
- (2021) Yurun Feng et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Printing glass in the nano
- (2021) Paolo Colombo et al. NATURE MATERIALS
- Mitigation strategies for Li-ion battery thermal runaway: A review
- (2021) Bin Xu et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Development of 3D Slurry Printing Technology with Submersion-Light Apparatus in Dental Application
- (2021) Cho-Pei Jiang et al. Materials
- 3D printing of NiZn ferrite architectures with high magnetic performance for efficient magnetic separation
- (2021) Xiangxia Wei et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Microwave absorption properties of SiCN ceramics doped with cobalt nanoparticles
- (2020) Shan Wang et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
- Boron nitride‐reinforced polysilazane‐derived ceramic composites via direct‐ink writing
- (2020) James W. Kemp et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Synthesis and Properties of macroporous SiC Ceramics synthesized by 3D printing and chemical vapor infiltration/deposition
- (2020) A. Baux et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics
- (2020) Ziyong Li et al. Virtual and Physical Prototyping
- Laminated Object Manufacturing of Ceramic‐Based Materials
- (2020) Benjamin Dermeik et al. ADVANCED ENGINEERING MATERIALS
- Additive Manufacturing of Polymer‐Derived Ceramic Matrix Composites
- (2020) Mark R. O’Masta et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Three-Dimensional Printing of Ceramics through “Carving” a Gel and “Filling in” the Precursor Polymer
- (2020) Mohammadreza Mahmoudi et al. ACS Applied Materials & Interfaces
- Realizing high ceramic yield and low shrinkage of in-situ formed lightweight 3D-SiC(rGO)px polymer-derived ceramics with excellent fracture toughness
- (2020) Kun Zhuang et al. CERAMICS INTERNATIONAL
- Carbon nanotubes as light absorbers in digital light processing three-dimensional printing of SiCN ceramics from preceramic polysilazane
- (2020) Jun Xiao et al. CERAMICS INTERNATIONAL
- Hydroxyapatite-coated ZrO2 scaffolds with a fluorapatite intermediate layer produced by direct ink writing
- (2020) Elwira Kocyło et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Electromagnetic microwave absorption theory and recent achievements in microwave absorbers
- (2020) Xiaojun Zeng et al. CARBON
- Dimensional retention of photocured ceramic units during 3D printing and sintering processes
- (2020) Cheng Zhang et al. CERAMICS INTERNATIONAL
- Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process
- (2020) Dou Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Xolography for linear volumetric 3D printing
- (2020) Martin Regehly et al. NATURE
- Additive manufacturing of advanced ceramic materials
- (2020) Y. Lakhdar et al. PROGRESS IN MATERIALS SCIENCE
- Volumetric additive manufacturing via tomographic reconstruction
- (2019) Brett E. Kelly et al. SCIENCE
- Semiconductor water-based inks: Miniaturized NiO pseudocapacitor electrodes by inkjet printing
- (2019) J. Yus et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Polymer‐derived silicon nitride ceramics by digital light processing based additive manufacturing
- (2019) Min Wang et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing
- (2019) Zhangwei Chen et al. CERAMICS INTERNATIONAL
- Inkjet printing of mixed-host emitting layer for electrophosphorescent organic light-emitting diodes
- (2019) You Jung Kang et al. ACS Applied Materials & Interfaces
- Fabrication and characterization of hardystonite-chitosan biocomposite scaffolds
- (2019) Silvia Stella Ramirez Caballero et al. CERAMICS INTERNATIONAL
- Achieving carbon-rich silicon-containing ceramic anode for advanced lithium ion battery
- (2019) Muhammad Idrees et al. CERAMICS INTERNATIONAL
- Preparation and stereolithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics
- (2019) Yuelong Fu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches
- (2019) Oscar Santoliquido et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina
- (2019) Lovro Gorjan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D Printing of Complex‐type SiOC Ceramics Derived From Liquid Photosensitive Resin
- (2019) Xiaobo Xu et al. ChemistrySelect
- Hierarchical carbon nanowires network modified PDCs-SiCN with improved microwave absorption performance
- (2019) Fangyuan Ren et al. CERAMICS INTERNATIONAL
- Glass powders and reactive silicone binder: Interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds
- (2019) Hamada Elsayed et al. CERAMICS INTERNATIONAL
- Comparative study on the electrochemical performance of LiFePO4 cathodes fabricated by low temperature 3D printing, direct ink writing and conventional roller coating process
- (2019) Changyong Liu et al. CERAMICS INTERNATIONAL
- Silicone resin derived larnite/C scaffolds via 3D printing for potential tumor therapy and bone regeneration
- (2019) Shengyang Fu et al. CHEMICAL ENGINEERING JOURNAL
- Dispersing of functionalized CNTs in Si–O–C ceramics and electromagnetic wave absorbing and mechanical properties of CNTs/Si–O–C nanocomposites
- (2019) Donghai Ding et al. CERAMICS INTERNATIONAL
- Passive filler loaded polysilazane‐derived glass/ceramic coating system applied to AISI 441 stainless steel, part 1: Processing and characterization
- (2019) Ivana Petríková et al. International Journal of Applied Ceramic Technology
- 3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties
- (2019) Huiwen Xiong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Metal additive manufacturing in the commercial aviation industry: A review
- (2019) Annamaria Gisario et al. JOURNAL OF MANUFACTURING SYSTEMS
- Hierarchically porous 3D-printed akermanite scaffolds from silicones and engineered fillers
- (2019) Arish Dasan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- The fate and role of in situ formed carbon in polymer-derived ceramics
- (2019) Qingbo Wen et al. PROGRESS IN MATERIALS SCIENCE
- Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
- (2019) David A. Walker et al. SCIENCE
- Highly Porous Polymer-Derived Bioceramics Based on a Complex Hardystonite Solid Solution
- (2019) Hamada Elsayed et al. Materials
- Fabrication of SiOC ceramic with cellular structure via UV-Assisted direct ink writing
- (2019) Lai Wei et al. CERAMICS INTERNATIONAL
- Electrospun SiOC ceramic fiber mats as freestanding electrodes for electrochemical energy storage applications
- (2019) Shakir Bin Mujib et al. CERAMICS INTERNATIONAL
- Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials
- (2019) Danna Tang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Semiconductor‐conductor transition of pristine polymer‐derived ceramics SiC pyrolyzed at temperature range from 1200°C to 1800°C
- (2019) Md Atiqur Rahman Chowdhury et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- SiOC functionalization of MoS2 as a means to improve stability as sodium-ion battery anode
- (2019) Davi Marcelo Soares et al. NANOTECHNOLOGY
- Organosilicon polymer-derived ceramics: An overview
- (2019) Shengyang Fu et al. Journal of Advanced Ceramics
- Microstructures, dielectric response and microwave absorption properties of polycarbosilane derived SiC powders
- (2018) Yichen Wang et al. CERAMICS INTERNATIONAL
- Multiple metals doped polymer-derived SiOC ceramics for 3D printing
- (2018) Yuelong Fu et al. CERAMICS INTERNATIONAL
- Electromagnetic wave absorption properties of nickel-containing polymer-derived SiCN ceramics
- (2018) Yu Liu et al. CERAMICS INTERNATIONAL
- Development and characterizations of novel aqueous-based LSCF suspensions for inkjet printing
- (2018) Zhangwei Chen et al. CERAMICS INTERNATIONAL
- Enhancing the yield of polycarbosilane synthesis via recycling of liquid by-product at atmospheric pressure
- (2018) Guodong Wang et al. CERAMICS INTERNATIONAL
- 3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors
- (2018) Cesar Parra-Cabrera et al. CHEMICAL SOCIETY REVIEWS
- Additive Manufacturing and size-dependent mechanical properties of three-dimensional microarchitected, high-temperature ceramic metamaterials
- (2018) Huachen Cui et al. JOURNAL OF MATERIALS RESEARCH
- Polymer-derived SiCN cellular structures from replica of 3D printed lattices
- (2018) Prasanta Jana et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Biosilicate® scaffolds produced by 3D-printing and direct foaming using preceramic polymers
- (2018) Hamada Elsayed et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Digital light processing of ceramic components from polysiloxanes
- (2018) Johanna Schmidt et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Polymer-derived ceramic/graphene oxide architected composite with high electrical conductivity and enhanced thermal resistance
- (2018) Benito Román-Manso et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Preparation and mechanical behaviors of SiOC-modified carbon-bonded carbon fiber composite with in-situ growth of three-dimensional SiC nanowires
- (2018) Bin Du et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites
- (2018) Xiaochao Jin et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology
- (2018) Shan Li et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Polymer-Derived Ceramics with engineered mesoporosity: From design to application in catalysis
- (2018) Abhijeet Lale et al. SURFACE & COATINGS TECHNOLOGY
- Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures
- (2018) Giorgia Franchin et al. Materials
- Stereolithography of SiOC Polymer-Derived Ceramics Filled with SiC Micronwhiskers
- (2018) Stephan A. Brinckmann et al. ADVANCED ENGINEERING MATERIALS
- Molecular polymer-derived ceramics for applications in electrochemical energy storage devices
- (2018) Santanu Mukherjee et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Direct ink writing of silica-carbon-calcite composite scaffolds from a silicone resin and fillers
- (2018) Hamada Elsayed et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers
- (2018) Hehao Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Origami and 4D printing of elastomer-derived ceramic structures
- (2018) Guo Liu et al. Science Advances
- Highly Porous Sr/Mg-Doped Hardystonite Bioceramics from Preceramic Polymers and Reactive Fillers: Direct Foaming and Direct Ink Writing
- (2018) Hamada Elsayed et al. ADVANCED ENGINEERING MATERIALS
- Investigation of pressure drop in 3D replicated open-cell foams: Coupling CFD with experimental data on additively manufactured foams
- (2018) Mauro Bracconi et al. CHEMICAL ENGINEERING JOURNAL
- Electromagnetic properties and microwave absorption performances of nickel-doped SiCN ceramics pyrolyzed at different temperatures
- (2018) Yu Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Complex mullite structures fabricated via digital light processing of a preceramic polysiloxane with active alumina fillers
- (2018) Johanna Schmidt et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D Nanofabrication of SiOC Ceramic Structures
- (2018) Laura Brigo et al. Advanced Science
- Electrical conductivity change induced by porosity within polymer-derived SiCN ceramics
- (2018) Jiahong Niu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Polyborosilazane derived ceramics - Nitrogen sulfur dual doped graphene nanocomposite anode for enhanced lithium ion batteries
- (2018) Muhammad Idrees et al. ELECTROCHIMICA ACTA
- Additive manufacturing tooling for the automotive industry
- (2017) R. Leal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Electromagnetic interference shielding and mechanical properties of Si3N4–SiOC composites fabricated by 3D-printing combined with polymer infiltration and pyrolysis
- (2017) Wenyan Duan et al. JOURNAL OF MATERIALS RESEARCH
- Direct ink writing of ceramic matrix composite structures
- (2017) Giorgia Franchin et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- The effect of B-doping on the electrical conductivity of polymer-derived Si(B)OC ceramics
- (2017) Gian Domenico Sorarù et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems
- (2017) Y. de Hazan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- B-doped hardystonite bioceramics from preceramic polymers and fillers: Synthesis and application to foams and 3D-printed scaffolds
- (2017) Hamada Elsayed et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers
- (2017) Hamada Elsayed et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Localized polymerization using single photon photoinitiators in two-photon process for fabricating subwavelength structures
- (2017) Govind Ummethala et al. POLYMER
- Anisotropic electrical conductivity in polymer derived ceramics induced by graphene aerogels
- (2017) Chen Shen et al. Journal of Materials Chemistry C
- 3D printing technologies for electrochemical energy storage
- (2017) Feng Zhang et al. Nano Energy
- Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
- (2016) Rouhollah D. Farahani et al. ADVANCED MATERIALS
- In-situ synthesis of hierarchically porous and polycrystalline carbon nanowires with excellent microwave absorption performance
- (2016) Hongxing Pan et al. CARBON
- The preparation and characterization of polymer-derived Fe/Si/C magnetoceramics
- (2016) Yanzi Gou et al. CERAMICS INTERNATIONAL
- Inkjet printing and nanoindentation of porous alumina multilayers
- (2016) Zhangwei Chen et al. CERAMICS INTERNATIONAL
- Research on selective laser sintering of Kaolin–epoxy resin ceramic powders combined with cold isostatic pressing and sintering
- (2016) Kai Liu et al. CERAMICS INTERNATIONAL
- Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds
- (2016) Andrea Zocca et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer
- (2016) Giovanni Pierin et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis and high-temperature oxidation of a polymer-derived Mo-SiN based ceramic composite
- (2016) Martin Seifert et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Silica-bonded apatite scaffolds from calcite-filled preceramic polymers
- (2016) L. Fiocco et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Robocasting of structural ceramic parts with hydrogel inks
- (2016) Ezra Feilden et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Porous polymer derived ceramics
- (2016) Cekdar Vakifahmetoglu et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Structural optimization of printed structures by self-organized relaxation
- (2016) Andrea Zocca et al. RAPID PROTOTYPING JOURNAL
- Polymer-derived sphene biocoating on cp-Ti substrates for orthopedic and dental implants
- (2016) Lisa Biasetto et al. SURFACE & COATINGS TECHNOLOGY
- Silicon oxycarbide glass-graphene composite paper electrode for long-cycle lithium-ion batteries
- (2016) Lamuel David et al. Nature Communications
- Direct Ink Writing of Silicon Carbide for Microwave Optics
- (2015) Chris M. Larson et al. ADVANCED ENGINEERING MATERIALS
- Stereolithography of SiOC Ceramic Microcomponents
- (2015) Erika Zanchetta et al. ADVANCED MATERIALS
- Electrical conductivity of dense, bulk silicon-oxycarbide ceramics
- (2015) Kwang Joo Kim et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Development of bioactive silicate-based glass-ceramics from preceramic polymer and fillers
- (2015) Hamada Elsayed et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3d-prining
- (2015) Wenyan Duan et al. MATERIALS LETTERS
- Porous and high surface area silicon oxycarbide-based materials—A review
- (2015) Kathy Lu MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Liquid polycarbosilanes: synthesis and evaluation as precursors for SiC ceramic
- (2015) Lijuan He et al. POLYMER INTERNATIONAL
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Additive manufacturing of polymer-derived ceramics
- (2015) Z. C. Eckel et al. SCIENCE
- Synthesis of Hierarchically Porous SiCN Materials and Pd Catalysts based on it for the Oxidation of Methane
- (2015) Stefan Schwarz et al. ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Synthesis and characterization of high ceramic yield polycarbosilane precursor for SiC
- (2015) Mangesh Lodhe et al. Journal of Advanced Ceramics
- Additive Manufacturing of Optically Transparent Glass
- (2015) John Klein et al. 3D Printing and Additive Manufacturing
- Osteogenic Differentiation of Human Mesenchymal Stem Cells in 3-D Zr-Si Organic-Inorganic Scaffolds Produced by Two-Photon Polymerization Technique
- (2015) Anastasia Koroleva et al. PLoS One
- 3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair
- (2014) Ning Xu et al. ACS Applied Materials & Interfaces
- Microstructure Development and Dielectric Characterization of Forsterite-Based Ceramics from Silicone Resins and Oxide Fillers
- (2014) Enrico Bernardo et al. ADVANCED ENGINEERING MATERIALS
- Additive Manufacturing of Ceramic-Based Materials
- (2014) Nahum Travitzky et al. ADVANCED ENGINEERING MATERIALS
- Polymer-derived SiC ceramics from polycarbosilane/boron mixtures densified by SPS
- (2014) E. Bernardo et al. CERAMICS INTERNATIONAL
- Thermoplastic 3D Printing-An Additive Manufacturing Method for Producing Dense Ceramics
- (2014) Uwe Scheithauer et al. International Journal of Applied Ceramic Technology
- Polymer-Derived Boron Nitride: A Review on the Chemistry, Shaping and Ceramic Conversion of Borazine Derivatives
- (2014) Samuel Bernard et al. Materials
- Advanced Ceramics from Preceramic Polymers Modified at the Nano-Scale: A Review
- (2014) Enrico Bernardo et al. Materials
- Current progress on the modification of carbon nanotubes and their application in electromagnetic wave absorption
- (2014) Fujie Ren et al. RSC Advances
- New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes
- (2013) A. Butscher et al. Acta Biomaterialia
- 3D Printing of Interdigitated Li-Ion Microbattery Architectures
- (2013) Ke Sun et al. ADVANCED MATERIALS
- SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer
- (2013) Andrea Zocca et al. JOURNAL OF MATERIALS RESEARCH
- Polysiloxane-Derived Ceramics Containing Nanowires with Catalytically Active Tips
- (2013) Michael Adam et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effect of Precursor on Speciation and Nanostructure of SiBCN Polymer-Derived Ceramics
- (2013) Scarlett Widgeon et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Hierarchically structured polymer-derived ceramic fibers by electrospinning and catalyst-assisted pyrolysis
- (2013) Anran Guo et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Analysis of silanes and of siloxanes formation by Raman spectroscopy
- (2013) Michael Schmitt RSC Advances
- Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
- (2012) A. Butscher et al. Acta Biomaterialia
- Wollastonite Foams From an Extruded Preceramic Polymer Mixed with CaCO3Microparticles Assisted by Supercritical Carbon Dioxide
- (2012) Enrico Bernardo et al. ADVANCED ENGINEERING MATERIALS
- Synthesis of a Ni-Containing Porous SiOC Material From Polyphenylmethylsiloxane by a Direct Foaming Technique
- (2012) Akira Idesaki et al. ADVANCED ENGINEERING MATERIALS
- Preparation and dielectric properties of polymer-derived SiCTi ceramics
- (2012) Zhaoju Yu et al. CERAMICS INTERNATIONAL
- Silicon-containing polymer-derived ceramic nanocomposites (PDC-NCs): preparative approaches and properties
- (2012) Emanuel Ionescu et al. CHEMICAL SOCIETY REVIEWS
- Polymer derived non-oxide ceramics modified with late transition metals
- (2012) Muhammad Zaheer et al. CHEMICAL SOCIETY REVIEWS
- Nanostructure and Energetics of Carbon-Rich SiCN Ceramics Derived from Polysilylcarbodiimides: Role of the Nanodomain Interfaces
- (2012) S. Widgeon et al. CHEMISTRY OF MATERIALS
- Biomedical production of implants by additive electro-chemical and physical processes
- (2012) Paulo Bartolo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Overcoming the “Coffee-Stain” Effect by Compositional Marangoni-Flow-Assisted Drop-Drying
- (2012) Mainak Majumder et al. JOURNAL OF PHYSICAL CHEMISTRY B
- Lithium insertion into dense and porous carbon-rich polymer-derived SiOC ceramics
- (2012) P. Dibandjo et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Processing route dramatically influencing the nanostructure of carbon-rich SiCN and SiBCN polymer-derived ceramics. Part I: Low temperature thermal transformation
- (2012) Yan Gao et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Multifunctional advanced ceramics from preceramic polymers and nano-sized active fillers
- (2012) P. Colombo et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Hyperbranched polycarbosiloxanes and polycarbosilanes via bimolecular non-linear hydrosilylation polymerization
- (2012) Jin Hu et al. POLYMER
- Process parameters appraisal of fabricating ceramic parts based on stereolithography using the Taguchi method
- (2012) Zhangwei Chen et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Multifunctional hybrids for electromagnetic absorption
- (2011) I. Huynen et al. ACTA MATERIALIA
- Novel 3D Wollastonite-Based Scaffolds from Preceramic Polymers Containing Micro- and Nano-Sized Reactive Particles
- (2011) Enrico Bernardo et al. ADVANCED ENGINEERING MATERIALS
- Novel processable precursor for BN by the polymer-derived ceramics route
- (2011) Yong-peng Lei et al. CERAMICS INTERNATIONAL
- Mechanical and electrical properties of polymer-derived Si–C–N ceramics reinforced by octadecylamine – Modified single-wall carbon nanotubes
- (2011) D. Shopova-Gospodinova et al. COMPOSITES SCIENCE AND TECHNOLOGY
- The generation of palladium silicide nanoalloy particles in a SiCN matrix and their catalytic applications
- (2011) Muhammad Zaheer et al. JOURNAL OF MATERIALS CHEMISTRY
- Synthesis and characterization of a new liquid polymer precursor for Si–B–C–N ceramics
- (2011) Zongbo Zhang et al. JOURNAL OF MATERIALS SCIENCE
- Inkjet printing ceramics: From drops to solid
- (2011) B. Derby JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Silicon carbide-based foams from direct blowing of polycarbosilane
- (2011) Manabu Fukushima et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Conversion behaviour and resulting mechanical properties of polysilazane-based coatings
- (2011) Martin Günthner et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Development of high concentrated aqueous silver nanofluid and inkjet printing on ceramic substrates
- (2011) A. Kosmala et al. MATERIALS CHEMISTRY AND PHYSICS
- Thermal degradation and fire performance of polysilazane-based coatings
- (2011) B. Gardelle et al. THERMOCHIMICA ACTA
- Raman spectroscopy studies of the high-temperature evolution of the free carbon phase in polycarbosilane derived SiC ceramics
- (2010) Ma Yan et al. CERAMICS INTERNATIONAL
- Copper-Containing SiCN Precursor Ceramics (Cu@SiCN) as Selective Hydrocarbon Oxidation Catalysts Using Air as an Oxidant
- (2010) Germund Glatz et al. CHEMISTRY-A EUROPEAN JOURNAL
- Thermodynamic measurements pertaining to the hysteretic intercalation of lithium in polymer-derived silicon oxycarbide
- (2010) Dongjoon Ahn et al. JOURNAL OF POWER SOURCES
- Synthesis of Silicon Nitride Fibers by the Carbothermal Reduction and Nitridation of Rice Husk Ash
- (2010) Varong Pavarajarn et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- 3D Printing of cement composites
- (2009) G. Gibbons Advances in Applied Ceramics
- Highly porous macro- and micro-cellular ceramics from a polysilazane precursor
- (2009) C. Vakifahmetoglu et al. CERAMICS INTERNATIONAL
- Fabrication of three-dimensional SiC ceramic microstructures with near-zero shrinkage via dual crosslinking induced stereolithography
- (2009) Sungjune Park et al. CHEMICAL COMMUNICATIONS
- Review of fire structural modelling of polymer composites
- (2009) A.P. Mouritz et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Electrochemical performance of graphene nanosheets and ceramic composites as anodes for lithium batteries
- (2009) Fang Ji et al. JOURNAL OF MATERIALS CHEMISTRY
- Platinum induced crosslinking of polycarbosilanes for the formation of highly porous CeO2/silicon oxycarbide catalysts
- (2009) Emanuel Kockrick et al. JOURNAL OF MATERIALS CHEMISTRY
- Preparation and selective laser sintering of nylon-12 coated metal powders and post processing
- (2009) Chunze Yan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dispersion assessment and studies on AC percolative conductivity in polymer-derived Si–C–N/CNT ceramic nanocomposites
- (2009) E. Ionescu et al. JOURNAL OF MATERIALS SCIENCE
- Electrochemical Properties of Polymer-Derived SiCN Materials as the Anode in Lithium Ion Batteries
- (2009) Dong Su et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidation
- (2009) Martin Günthner et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Carbon-rich SiCN ceramics derived from phenyl-containing poly(silylcarbodiimides)
- (2009) Gabriela Mera et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Processing and mechanical properties of Si3N4 composites employing polymer-derived SiAlOC as sintering aid
- (2009) T. Plachký et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Integrating Structure Control over Multiple Length Scales in Porous High Temperature Ceramics with Functional Platinum Nanoparticles
- (2009) Marleen Kamperman et al. NANO LETTERS
- Two-photon fabrication
- (2009) Maria Farsari et al. Nature Photonics
- Curing characteristics of ceramic stereolithography for an aqueous-based silica suspension
- (2009) Z Chen et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- Synthesis and Properties of Porous Hybrid Materials containing Metallic Nanoparticles
- (2008) M. Wilhelm et al. ADVANCED ENGINEERING MATERIALS
- Development of multiphase bioceramics from a filler-containing preceramic polymer
- (2008) E. Bernardo et al. CERAMICS INTERNATIONAL
- Slant beam rotation UV scanning to eliminate stair-steps in stereolithography fabrications
- (2008) Khalid Mahmood Arif et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Net Shape Manufacturing of Three-Dimensional SiCN Ceramic Microstructures Using an Isotropic Shrinkage Method by Introducing Shrinkage Guiders
- (2008) Tae Woo Lim et al. International Journal of Applied Ceramic Technology
- Control of structure formation of polycarbosilane synthesized from polydimethylsilane by Kumada rearrangement
- (2008) Jiangxi Chen et al. JOURNAL OF APPLIED POLYMER SCIENCE
- SiOC ceramic foams synthesized from electron beam irradiated methylsilicone resin
- (2008) R. M. Rocha et al. JOURNAL OF MATERIALS SCIENCE
- Polymer-derived microcellular SiOC foams with magnetic functionality
- (2008) Lisa Biasetto et al. JOURNAL OF MATERIALS SCIENCE
- Development of Dense Filler-Free Polymer-Derived SiOC Ceramics by Field-Assisted Sintering
- (2008) Mohammad Esfehanian et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Synthesis, Characterization, and Pyrolytic Conversion of a Novel Liquid Polycarbosilane
- (2008) Yunhui Fang et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Engineering porosity in polymer-derived ceramics
- (2008) Paolo Colombo JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- SiOC ceramic with high excess free carbon
- (2008) Hans-Joachim Kleebe et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
- (2008) B. Cappi et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fabrication and characterization of fully dense Si–C–N ceramics from a poly(ureamethylvinyl)silazane precursor
- (2008) Narayanan Janakiraman et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Advanced ceramics from a preceramic polymer and nano-fillers
- (2008) E. Bernardo et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Rheology and processability of multi-walled carbon nanotubes—ABSE polycarbosilazane composites
- (2007) Sylvia Kokott et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Practical method for the synthesis of polysilanes using Mg and Lewis acid system
- (2007) Shigenori Kashimura et al. TETRAHEDRON LETTERS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started