Mechanical properties of 3D-printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Mechanical properties of 3D-printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies
Authors
Keywords
-
Journal
JOURNAL OF PROSTHETIC DENTISTRY
Volume -, Issue -, Pages -
Publisher
Elsevier BV
Online
2022-08-05
DOI
10.1016/j.prosdent.2022.06.008
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Comparison of artificial tooth position in dentures fabricated by heat‐curing and additive manufacturing
- (2021) Akinori Tasaka et al. AUSTRALIAN DENTAL JOURNAL
- Evaluation of Internal Fit and Marginal Adaptation of Provisional Crowns Fabricated with Three Different Techniques
- (2021) Jie Wu et al. SENSORS
- Evaluation of Denture Base Adaptation Fabricated Using Conventional, Subtractive and Additive Technologies: A Volumetric Micro‐Computed Tomography Analysis
- (2021) Ece İrem Oğuz et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- 3D printing restorative materials using a stereolithographic technique: a systematic review
- (2021) Alvaro Della Bona et al. DENTAL MATERIALS
- Bond strength of conventional, subtractive, and additive manufactured denture bases to soft and hard relining materials
- (2021) Gregor Wemken et al. DENTAL MATERIALS
- Accuracy of 3D printing compared with milling — A multi-center analysis of try-in dentures
- (2021) Christopher Herpel et al. JOURNAL OF DENTISTRY
- The PRISMA 2020 statement: an updated guideline for reporting systematic reviews
- (2021) Matthew J Page et al. BMJ-British Medical Journal
- In vitro investigation of the influence of printing direction on the flexural strength, flexural modulus and fractographic analysis of 3D-printed temporary materials
- (2021) Andreas KEßLER et al. DENTAL MATERIALS JOURNAL
- 3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials
- (2021) Lisa Marie Schönhoff et al. Journal of the Mechanical Behavior of Biomedical Materials
- A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications
- (2021) Yueyi Tian et al. SCANNING
- Optical and mechanical properties of conventional, milled and 3D-printed denture teeth
- (2021) Mei Ting Tieh et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of polymethyl methacrylate as a denture base: Conventional versus CAD-CAM resin – A systematic review and meta-analysis of in vitro studies
- (2021) João Pedro Justino de Oliveira Limírio et al. JOURNAL OF PROSTHETIC DENTISTRY
- Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth
- (2020) Alexander Prechtel et al. Clinical Oral Investigations
- Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars
- (2020) A. Ioannidis et al. DENTAL MATERIALS
- Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices
- (2020) Constantin Berli et al. JOURNAL OF PROSTHETIC DENTISTRY
- Evaluation of the accuracy (trueness and precision) of a maxillary trial denture according to the layer thickness: An in vitro study
- (2020) Seung-Min You et al. JOURNAL OF PROSTHETIC DENTISTRY
- Fitness accuracy and retentive forces of additive manufactured titanium clasp
- (2020) Kazuya Takahashi et al. Journal of Prosthodontic Research
- Chairside fabrication of provisional crowns on FDM 3D-printed PVA model
- (2020) Saori Muta et al. Journal of Prosthodontic Research
- Effect of build orientation on the manufacturing process and the properties of stereolithographic dental ceramics for crown frameworks
- (2020) Marion Dehurtevent et al. JOURNAL OF PROSTHETIC DENTISTRY
- Effects of fabrication techniques on denture base adaptation: An in vitro study
- (2020) Chih-Yuan Hsu et al. JOURNAL OF PROSTHETIC DENTISTRY
- Dimensional accuracy and clinical adaptation of ceramic crowns fabricated with the stereolithography technique
- (2020) Wenjun Wang et al. JOURNAL OF PROSTHETIC DENTISTRY
- Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys
- (2020) Marta Revilla-León et al. JOURNAL OF PROSTHETIC DENTISTRY
- Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia
- (2020) Marta Revilla-León et al. JOURNAL OF PROSTHETIC DENTISTRY
- Comparison of Mechanical Properties of 3D‐Printed, CAD/CAM, and Conventional Denture Base Materials
- (2020) Vladimir Prpić et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Additive manufacturing of dental polymers: An overview on processes, materials and applications
- (2020) Julia JOCKUSCH et al. DENTAL MATERIALS JOURNAL
- Physical and surface properties of a 3D-printed composite resin for a digital workflow
- (2020) Cassiana Koch Scotti et al. JOURNAL OF PROSTHETIC DENTISTRY
- Evaluation of bond strength of porous cobalt-chromium metal and pressed ceramic fabricated by additive manufacturing
- (2020) Eun-Jeong Bae et al. JOURNAL OF PROSTHETIC DENTISTRY
- Tribological performance of the pair human teeth vs 3D printed zirconia: An in vitro chewing simulation study
- (2020) A.C. Branco et al. Journal of the Mechanical Behavior of Biomedical Materials
- Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update
- (2020) Muhammad Sohail Zafar Polymers
- 3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications
- (2020) Danial Khorsandi et al. Acta Biomaterialia
- Adhesion of Denture Characterizing Composites to Heat‐Cured, CAD/CAM and 3D Printed Denture Base Resins
- (2020) Joanne Jung Eun Choi et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters
- (2020) Yiqiao Wang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Performance of stereolithography and milling in fabricating monolithic zirconia crowns with different finish line designs
- (2020) Rong Li et al. Journal of the Mechanical Behavior of Biomedical Materials
- Repairability of a 3D printed denture base polymer: Effects of surface treatment and artificial aging on the shear bond strength
- (2020) Ping Li et al. Journal of the Mechanical Behavior of Biomedical Materials
- Adaptation of removable partial denture frameworks fabricated by selective laser melting
- (2019) Hu Chen et al. JOURNAL OF PROSTHETIC DENTISTRY
- Production tolerance of conventional and digital workflow in the manufacturing of glass ceramic crowns
- (2019) Deyar Jallal Hadi Mahmood et al. DENTAL MATERIALS
- Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging—an in vitro study
- (2019) Marcel Reymus et al. Clinical Oral Investigations
- Implant-Prosthodontic Discrepancy of Complete-Arch Cobalt-Chromium Implant Frameworks Manufactured Through Selective Laser Melting Additive Manufacturing Technology Using a Coordinate Measuring Machine
- (2019) Marta Revilla-León et al. INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
- CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness
- (2019) Nicole Kalberer et al. JOURNAL OF PROSTHETIC DENTISTRY
- Effect of finish line design and metal alloy on the marginal and internal gaps of selective laser melting printed copings
- (2019) Adel Al Maaz et al. JOURNAL OF PROSTHETIC DENTISTRY
- Assessment of the internal fit and marginal integrity of interim crowns made by different manufacturing methods
- (2019) Chin-Chun Peng et al. JOURNAL OF PROSTHETIC DENTISTRY
- 3D Printing in Dentistry—State of the Art
- (2019) A Kessler et al. OPERATIVE DENTISTRY
- Adhesion of porcelain to three-dimensionally printed and soft milled cobalt chromium
- (2019) Abdullah Barazanchi et al. Journal of Prosthodontic Research
- Metal-ceramic bond strength of a cobalt chromium alloy for dental prosthetic restorations with a porous structure using metal 3D printing
- (2019) Hongfei Wang et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Digital dentistry: The new state of the art — Is it disruptive or destructive?
- (2019) E. Dianne Rekow DENTAL MATERIALS
- Strength and Adaptation of Stereolithography-Fabricated Zirconia Dental Crowns: An In Vitro Study
- (2019) Rong Li et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Fracture Resistance of Additively Manufactured Zirconia Crowns when Cemented to Implant Supported Zirconia Abutments: An in vitro Study
- (2019) Amirali Zandinejad et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Accuracy of removable partial denture framework fabricated by casting with a 3D printed pattern and selective laser sintering
- (2019) Akinori Tasaka et al. Journal of Prosthodontic Research
- Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters
- (2019) Alexander Prechtel et al. DENTAL MATERIALS
- Accuracy of Clasps Fabricated with Three Different CAD/CAM Technologies: Casting, Milling, and Selective Laser Sintering
- (2019) Akinori Tasaka et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Influence of ceramic firing on marginal gap accuracy and metal-ceramic bond strength of 3D-printed Co-Cr frameworks
- (2019) Adolfo Di Fiore et al. JOURNAL OF PROSTHETIC DENTISTRY
- Bond Strength of Denture Teeth to Heat‐Cured, CAD/CAM and 3D Printed Denture Acrylics
- (2019) Joanne Jung Eun Choi et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Assessment of the Adaptation of Interim Crowns using Different Measurement Techniques
- (2019) Chin‐Chun Peng et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations
- (2019) Ji Suk Shim et al. JOURNAL OF PROSTHETIC DENTISTRY
- Evaluation of mechanical properties of new elastomer material applicable for dental 3D printer
- (2019) Qutaiba Alsandi et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D printed versus conventionally cured provisional crown and bridge dental materials
- (2018) Anthony Tahayeri et al. DENTAL MATERIALS
- Geometrical accuracy of metallic objects produced with additive or subtractive manufacturing: A comparative in vitro study
- (2018) Michael Braian et al. DENTAL MATERIALS
- Additively Manufactured Titanium and Cobalt-Chromium Implant Frameworks: Fit and Effect of Ceramic Veneering
- (2018) Per Svanborg et al. INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
- Polylactic Acid as a Material for Three-Dimensional Printing of Provisional Restorations
- (2018) Pedro Molinero-Mourelle et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Three-Dimensional Analysis of Internal Adaptations of Crowns Cast from Resin Patterns Fabricated Using Computer-Aided Design/Computer-Assisted Manufacturing Technologies
- (2018) Yushu Liu et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Accuracy of CAD-CAM-fabricated removable partial dentures
- (2018) Christin Arnold et al. JOURNAL OF PROSTHETIC DENTISTRY
- Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies
- (2018) Marta Revilla-León et al. JOURNAL OF PROSTHETIC DENTISTRY
- Trueness analysis of zirconia crowns fabricated with 3-dimensional printing
- (2018) Weina Wang et al. JOURNAL OF PROSTHETIC DENTISTRY
- Marginal and internal fit of pressed lithium disilicate inlays fabricated with milling, 3D printing, and conventional technologies
- (2018) Foudda R. Homsy et al. JOURNAL OF PROSTHETIC DENTISTRY
- Comparison of dimensional accuracy of conventionally and digitally manufactured intracoronal restorations
- (2018) Reza Eftekhar Ashtiani et al. JOURNAL OF PROSTHETIC DENTISTRY
- Mechanical properties of cobalt-chromium 3-unit fixed dental prostheses fabricated by casting, milling, and additive manufacturing
- (2018) Marit Øilo et al. JOURNAL OF PROSTHETIC DENTISTRY
- Layered Manufacturing of Dental Ceramics: Fracture Mechanics, Microstructure, and Elemental Composition of Lithography-Sintered Ceramic
- (2018) Yurdanur Uçar et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Comparing the accuracy (trueness and precision) of models of fixed dental prostheses fabricated by digital and conventional workflows
- (2018) Ji-Young Sim et al. Journal of Prosthodontic Research
- Comparison and evaluation of marginal and internal gaps in cobalt–chromium alloy copings fabricated using subtractive and additive manufacturing
- (2018) Dong-Yeon Kim et al. Journal of Prosthodontic Research
- Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs
- (2018) Nawal Alharbi et al. Journal of Prosthodontic Research
- Evaluation of adaptation of the polylactic acid pattern of maxillary complete dentures fabricated by fused deposition modelling technology: A pilot study
- (2018) Kehui Deng et al. PLoS One
- An In Vitro Investigation of Accuracy and Fit of Conventional and CAD/CAM Removable Partial Denture Frameworks
- (2018) Pooya Soltanzadeh et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Accuracy and retention of denture base fabricated by heat curing and additive manufacturing
- (2018) Akinori Tasaka et al. Journal of Prosthodontic Research
- Preliminary Clinical Application of Removable Partial Denture Frameworks Fabricated Using Computer-Aided Design and Rapid Prototyping Techniques
- (2017) Hongqiang Ye et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Build Angle: Does It Influence the Accuracy of 3D-Printed Dental Restorations Using Digital Light-Processing Technology?
- (2017) Reham Osman et al. INTERNATIONAL JOURNAL OF PROSTHODONTICS
- Fit of interim crowns fabricated using photopolymer-jetting 3D printing
- (2017) Hang-Nga Mai et al. JOURNAL OF PROSTHETIC DENTISTRY
- Comparison of margin discrepancy of complete gold crowns fabricated using printed, milled, and conventional hand-waxed patterns
- (2017) Sergio Munoz et al. JOURNAL OF PROSTHETIC DENTISTRY
- A comparative study of additive and subtractive manufacturing for dental restorations
- (2017) Eun-Jeong Bae et al. JOURNAL OF PROSTHETIC DENTISTRY
- Reproducibility of different arrangement of resin copings by dental microstereolithography: Evaluating the marginal discrepancy of resin copings
- (2017) Dong-Yeon Kim et al. JOURNAL OF PROSTHETIC DENTISTRY
- Dimensional accuracy of dental casting patterns created by 3D printers
- (2016) Yoshiki ISHIDA et al. DENTAL MATERIALS JOURNAL
- Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations
- (2016) Nawal Alharbi et al. JOURNAL OF PROSTHETIC DENTISTRY
- In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods
- (2016) Jin-Young Park et al. JOURNAL OF PROSTHETIC DENTISTRY
- Systematic Reviews in Dental Research. A Guideline
- (2015) LC Maia et al. Journal of Clinical Pediatric Dentistry
- Reviewing studies with diverse designs: the development and evaluation of a new tool
- (2011) Reema Sirriyeh et al. JOURNAL OF EVALUATION IN CLINICAL PRACTICE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now