Large scale application of carbon capture to process industries – A review

Materials challenges with CO2 transport and injection for carbon capture and storage

(2022) J. Sonke et al.   International Journal of Greenhouse Gas Control

Biogas role in achievement of the sustainable development goals: Evaluation, Challenges, and Guidelines

(2022) Khaled Obaideen et al.   Journal of the Taiwan Institute of Chemical Engineers

Renewable energy and climate change

(2022) A.G. Olabi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Carbon capturing for emissions reduction at building level: A market assessment from a building management perspective

(2021) Sarin Raj Pokhrel et al.   JOURNAL OF CLEANER PRODUCTION

Leveraging scale economies and policy incentives: Carbon capture, utilization & storage in Gulf clusters

(2021) Andrew R. Waxman et al.   ENERGY POLICY

Benefits of a regional co-processing scheme: The case of steel/iron and cement industries in Vietnam, Laos, and Cambodia

(2021) Jordi Cravioto et al.   Journal of Cleaner Production

Renewable and Non-renewable in the energy-emissions-climate nexus: Brazilian contributions to climate change via international trade

(2021) Marco Antonio Montoya et al.   Journal of Cleaner Production

Asymmetric nexus between economic policy uncertainty, renewable energy technology budgets, and environmental sustainability: Evidence from the United States

(2021) Zahoor Ahmed et al.   Journal of Cleaner Production

Calculation of greenhouse gas emissions for a carbon recycling system using mineral carbon capture and utilization technology in the cement industry

(2021) Yoshito Izumi et al.   Journal of Cleaner Production

Water-energy-carbon nexus: A life cycle assessment of post-combustion carbon capture technology from power plant level

(2021) Junyao Wang et al.   Journal of Cleaner Production

Effects of COVID-19 on the environment: An overview on air, water, wastewater, and solid waste

(2021) Khaled Elsaid et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Application of nanofluids for enhanced waste heat recovery: A review

(2021) A.G. Olabi et al.   Nano Energy

Harmonized comparison of virgin steel production using biomass with carbon capture and storage for negative emissions

(2021) Fan Yang et al.   International Journal of Greenhouse Gas Control

Techno-economic assessment of an industrial carbon capture hub sharing a cement rotary kiln as sorbent regenerator

(2021) P. Lisbona et al.   International Journal of Greenhouse Gas Control

Assessing the carbon capture capacity of South Wales’ legacy iron and steel slag

(2021) Jennifer Saratu Chukwuma et al.   MINERALS ENGINEERING

Assessment of the pre-combustion carbon capture contribution into sustainable development goals SDGs using novel indicators

(2021) A.G. Olabi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

U.S. DOE/NETL large pilot-scale testing of advanced carbon capture technologies

(2020) Lynn Brickett et al.   FUEL

Pathways for Low-Carbon Transition of the Steel Industry—A Swedish Case Study

(2020) Alla Toktarova et al.   Energies

Waste heat-driven desalination systems: Perspective

(2020) A.G. Olabi et al.   ENERGY

Recent progress on the utilization of waste heat for desalination: A review

(2020) Khaled Elsaid et al.   ENERGY CONVERSION AND MANAGEMENT

Can bioenergy with carbon capture and storage result in carbon negative steel?

(2020) Samantha Eleanor Tanzer et al.   International Journal of Greenhouse Gas Control

Tensions in the energy transition: Swedish and Finnish company perspectives on bioenergy with carbon capture and storage

(2020) Emily Rodriguez et al.   JOURNAL OF CLEANER PRODUCTION

A General Vision for Reduction of Energy Consumption and CO2 Emissions from the Steel Industry

(2020) Lauri Holappa   Metals

Experimental investigation of the carbonation reactor in a tail-end Calcium Looping configuration for CO2 capture from cement plants

(2020) Matthias Hornberger et al.   FUEL PROCESSING TECHNOLOGY

Progress in carbon capture technologies

(2020) Tabbi Wilberforce et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Fuel cells for carbon capture applications

(2020) Mohammad Ali Abdelkareem et al.   SCIENCE OF THE TOTAL ENVIRONMENT

A critical review on environmental impacts of renewable energy systems and mitigation strategies: Wind, hydro, biomass and geothermal

(2020) Enas Taha Sayed et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Enabling Large-Scale Carbon Capture, Utilisation, and Storage (CCUS) Using Offshore Carbon Dioxide (CO2) Infrastructure Developments—A Review

(2019) Lars Ingolf Eide et al.   Energies

Toward a common method of cost-review for carbon capture technologies in the industrial sector: cement and iron and steel plants

(2019) Monica Garcia et al.   International Journal of Greenhouse Gas Control

Study of the post-combustion CO2 capture process by absorption-regeneration using amine solvents applied to cement plant flue gases with high CO2 contents

(2019) Sinda Laribi et al.   International Journal of Greenhouse Gas Control

A review of greenhouse gas emission profiles, dynamics, and climate change mitigation efforts across the key climate change players

(2019) Xiaosong Zheng et al.   JOURNAL OF CLEANER PRODUCTION

Excess heat-driven carbon capture at an integrated steel mill – Considerations for capture cost optimization

(2019) Maximilian Biermann et al.   International Journal of Greenhouse Gas Control

Getting ready for carbon capture and storage in the iron and steel sector in China: Assessing the value of capture readiness

(2019) Hui Ding et al.   JOURNAL OF CLEANER PRODUCTION

Recent trends in the development of adsorption technologies for carbon dioxide capture: A brief literature and patent reviews (2014–2018)

(2019) Farihahusnah Hussin et al.   JOURNAL OF CLEANER PRODUCTION

A review of the current environmental challenges of the steel industry and its value chain

(2019) Alberto N. Conejo et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Post-combustion carbon capture by membrane separation, Review

(2019) Magda Kárászová et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Cross-flow structured packing for the process intensification of post-combustion carbon dioxide capture

(2018) Gianluca Lavalle et al.   CHEMICAL ENGINEERING SCIENCE

One-dimensional model of entrained-flow carbonator for CO 2 capture in cement kilns by Calcium looping process

(2018) Maurizio Spinelli et al.   CHEMICAL ENGINEERING SCIENCE

Quantifying carbon capture potential and cost of carbon capture technology application in the U.S. refining industry

(2018) Yuan Yao et al.   International Journal of Greenhouse Gas Control

The CO 2 economy: Review of CO 2 capture and reuse technologies

(2018) Efthymia Ioanna Koytsoumpa et al.   JOURNAL OF SUPERCRITICAL FLUIDS

Efficiency evaluation of a coal-fired power plant integrated with chilled ammonia process using an absorption refrigerator

(2018) Fu Wang et al.   APPLIED ENERGY

Carbon dioxide capture by solvent absorption using amino acids: A review

(2018) Guoping Hu et al.   CHINESE JOURNAL OF CHEMICAL ENGINEERING

Evaluation of low and high level integration options for carbon capture at an integrated iron and steel mill

(2018) Maria Sundqvist et al.   International Journal of Greenhouse Gas Control

Inherent potential of steelmaking to contribute to decarbonisation targets via industrial carbon capture and storage

(2018) Sicong Tian et al.   Nature Communications

Relevancy of Emission Reduction Fund (ERF) policy towards large-scale deployment of carbon capture technology in black coal-fired power plant

(2018) Norhuda Abdul Manaf et al.   JOURNAL OF CLEANER PRODUCTION

Power-to-Steel: Reducing CO2 through the Integration of Renewable Energy and Hydrogen into the German Steel Industry

(2017) Alexander Otto et al.   Energies

Research on CO2 Emission Reduction Mechanism of China’s Iron and Steel Industry under Various Emission Reduction Policies

(2017) Ye Duan et al.   Energies

A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources

(2017) D. Leeson et al.   International Journal of Greenhouse Gas Control

Analysis of the integration of a steel plant in Australia with a carbon capture system powered by renewable energy and NG-CHP

(2017) Abdul Qadir et al.   JOURNAL OF CLEANER PRODUCTION

A modelling approach that combines pricing policies with a carbon capture and storage supply chain network

(2017) Ernesto D.R. Santibanez-Gonzalez   JOURNAL OF CLEANER PRODUCTION

Carbon dioxide and heat integration of industrial parks

(2017) Raid J. Hassiba et al.   JOURNAL OF CLEANER PRODUCTION

Carbon capture by absorption – Path covered and ahead

(2017) I. Sreedhar et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations – A review

(2016) R. Ben-Mansour et al.   APPLIED ENERGY

Oxygen blast furnace with CO 2 capture and storage at an integrated steel mill – Part II: Economic feasibility in comparison with conventional blast furnace highlighting sensitivities

(2015) Eemeli Tsupari et al.   International Journal of Greenhouse Gas Control

Low carbon measures for cement plant – a review

(2015) Siti Aktar Ishak et al.   JOURNAL OF CLEANER PRODUCTION

Membrane-based carbon capture from flue gas: a review

(2015) Rajab Khalilpour et al.   JOURNAL OF CLEANER PRODUCTION

Carbon capture, storage and utilisation technologies: A critical analysis and comparison of their life cycle environmental impacts

(2015) Rosa M. Cuéllar-Franca et al.   Journal of CO2 Utilization

Oxygen blast furnace with CO 2 capture and storage at an integrated steel mill—Part I: Technical concept analysis

(2014) Antti Arasto et al.   International Journal of Greenhouse Gas Control

Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2

(2013) Arshe Said et al.   APPLIED ENERGY

Assessment of strategies for CO2 abatement in the European petroleum refining industry

(2012) Daniella Johansson et al.   ENERGY

CO2 capture in oil refineries: Assessment of the capture avoidance costs associated with different heat supply options in a future energy market

(2012) Daniella Johansson et al.   ENERGY CONVERSION AND MANAGEMENT

Techno-economic assessment of CO2 capture at steam methane reforming facilities using commercially available technology

(2012) J.C. Meerman et al.   International Journal of Greenhouse Gas Control

Post-combustion capture of CO2 at an integrated steel mill – Part II: Economic feasibility

(2012) Eemeli Tsupari et al.   International Journal of Greenhouse Gas Control

Assessment of CO2 capture technologies in cement manufacturing process

(2012) Konstantinos Vatopoulos et al.   JOURNAL OF CLEANER PRODUCTION

Global strategies and potentials to curb CO2 emissions in cement industry

(2012) Emad Benhelal et al.   JOURNAL OF CLEANER PRODUCTION

Recent advances in catalytic hydrogenation of carbon dioxide

(2011) Wei Wang et al.   CHEMICAL SOCIETY REVIEWS

Investigation into potential synergy between power generation, cement manufacture and CO2 abatement using the calcium looping cycle

(2011) Charles C. Dean et al.   Energy & Environmental Science

Analysis of a Process for Capturing the CO2Resulting from the Precalcination of Limestone in a Cement Plant

(2011) N. Rodriguez et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes

(2011) Takeshi Kuramochi et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

A Brief Overview of Low CO2 Emission Technologies for Iron and Steel Making

(2010) Chunbao (Charles) XU et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

CO2 capture for refineries, a practical approach

(2009) Jiri van Straelen et al.   International Journal of Greenhouse Gas Control

Carbon capture and storage: Pulling down the barriers in the European Union

(2009) S Tysoe   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY

Hydrogen from coal-derived methanol via autothermal reforming processes

(2007) H YOON et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY