Precipitation, transformation, and coarsening of carbides in a high-carbon Ni-based superalloy during selective laser melting and hot isostatic pressing processes

Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via laser powder bed fusion (LPBF)

(2022) E. Bassini et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting

(2022) Jung-Uk Lee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A critical review on the microstructure and mechanical properties correlation of additively manufactured nickel-based superalloys

(2022) Md. Shahwaz et al.   JOURNAL OF ALLOYS AND COMPOUNDS

End to end process evaluation for additively manufactured liquid rocket engine thrust chambers

(2021) Fabio Kerstens et al.   ACTA ASTRONAUTICA

Microstructure and Mechanical Properties of Carbides Reinforced Nickel Matrix Alloy Prepared by Selective Laser Melting

(2021) Tian Xia et al.   Materials

Effect of solution heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Hastelloy X manufactured by electron beam powder bed fusion

(2021) Amal Shaji Karapuzha et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Additive manufacturing of metals: Microstructure evolution and multistage control

(2021) Zhiyuan Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and mechanical performance of ODS superalloys manufactured by selective laser melting

(2021) Qing-song Song et al.   OPTICS AND LASER TECHNOLOGY

Metal 3D printing as a disruptive technology for superalloys

(2020) Chinnapat Panwisawas et al.   Nature Communications

Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A Review

(2019) Sasan Dadbakhsh et al.   ADVANCED ENGINEERING MATERIALS

Novel in situ synthesized carbide reinforced Ni base composite for structural castings with high creep resistance

(2019) Wei Wang et al.   MATERIALS & DESIGN

Impact of chemical composition on precipitate morphology in an additively manufactured nickel base superalloy

(2019) J.S. Zuback et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation and phase transformation mechanism of additive manufactured Ni-Co base superalloy

(2019) Ling Tang et al.   MATERIALS CHARACTERIZATION

Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys

(2019) Paraskevas Kontis et al.   ACTA MATERIALIA

Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion

(2019) David B. Witkin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy

(2019) Maximilian Haack et al.   MATERIALS CHARACTERIZATION

Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing

(2019) Quanquan Han et al.   OPTICS AND LASER TECHNOLOGY

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

(2018) Fan Zhang et al.   ACTA MATERIALIA

Recent advances in the development of aerospace materials

(2018) Xuesong Zhang et al.   PROGRESS IN AEROSPACE SCIENCES

Carbide precipitation characteristics in additive manufacturing of Co-Cr-Mo alloy via selective electron beam melting

(2018) X.P. Tan et al.   SCRIPTA MATERIALIA

Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing

(2017) Y.L. Hu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion

(2017) Alena Kreitcberg et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing

(2017) Yen-Ling Kuo et al.   SCRIPTA MATERIALIA

The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing

(2017) Yen-Ling Kuo et al.   MATERIALS & DESIGN

State-of-the-art in surface integrity in machining of nickel-based super alloys

(2016) A. Thakur et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Grain boundary character correlated carbide precipitation and mechanical properties of Ni-20Cr-18W-1Mo superalloy

(2016) Yinben Han et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of initial microstructure on creep deformation behaviors and fracture characteristics of Haynes 230 superalloy at 900°C

(2015) J.G. Yoon et al.   MATERIALS CHARACTERIZATION

Influence of grain orientation on the incipient oxidation behavior of Haynes 230 at 900 °C

(2015) Xu Wang et al.   MATERIALS CHARACTERIZATION

Effect of molten pool boundaries on the mechanical properties of selective laser melting parts

(2014) Wen Shifeng et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy

(2012) Rui Hu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™

(2011) C.J. Boehlert et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of M23C6 carbides on the formation of grain boundary serrations in a wrought Ni-based superalloy

(2011) Li Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING