Additive manufacturing of metals: Microstructure evolution and multistage control

Revealing the Mechanisms of Grain Nucleation and Formation During Additive Manufacturing

(2020) Michael Bermingham et al.   JOM

Grain structure control during metal 3D printing by high-intensity ultrasound

(2020) C. J. Todaro et al.   Nature Communications

Premature failure of an additively manufactured material

(2020) Zhi Wang et al.   NPG Asia Materials

The origin of high-density dislocations in additively manufactured metals

(2020) Ge Wang et al.   Materials Research Letters

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

(2020) K.M. Bertsch et al.   ACTA MATERIALIA

Solid-State Metal Additive Manufacturing: A Review

(2020) Nihan Tuncer et al.   JOM

Microstructural heterogeneity and mechanical anisotropy of 18Ni-330 maraging steel fabricated by selective laser melting: The effect of build orientation and height

(2020) Yi Yao et al.   JOURNAL OF MATERIALS RESEARCH

High-strength Damascus steel by additive manufacturing

(2020) Philipp Kürnsteiner et al.   NATURE

The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS

(2020) Jithin James Marattukalam et al.   MATERIALS & DESIGN

Alloys-By-Design: Application to New Superalloys for Additive Manufacturing

(2020) Yuanbo T. Tang et al.   ACTA MATERIALIA

A modified volumetric energy density–based approach for porosity assessment in additive manufacturing process design

(2020) Paolo Ferro et al.   The International Journal of Advanced Manufacturing Technology

Metallurgy, mechanistic models and machine learning in metal printing

(2020) T. DebRoy et al.   Nature Reviews Materials

Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing

(2020) Hui Xiao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy

(2020) Zhongji Sun et al.   ACTA MATERIALIA

On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing

(2019) Alistair Ho et al.   ACTA MATERIALIA

Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing

(2019) M.J. Bermingham et al.   ACTA MATERIALIA

Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy

(2019) Wei Xiong et al.   MATERIALS & DESIGN

3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting

(2019) Nesma T. Aboulkhair et al.   PROGRESS IN MATERIALS SCIENCE

Modeling of thermal and solidification behavior during laser additive manufacturing of AlSi10Mg alloy powders and its experimental validation

(2019) Mihir Samantaray et al.   JOURNAL OF LASER APPLICATIONS

Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy

(2019) Z. G. Zhu et al.   Materials Research Letters

Steels in additive manufacturing: A review of their microstructure and properties

(2019) P. Bajaj et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microscale residual stresses in additively manufactured stainless steel

(2019) Wen Chen et al.   Nature Communications

Additive manufacturing of ultrafine-grained high-strength titanium alloys

(2019) Duyao Zhang et al.   NATURE

Analysis of cyclic phase transformations during additive manufacturing of hardenable tool steel by in-situ X-ray diffraction experiments

(2019) Jeremy Epp et al.   SCRIPTA MATERIALIA

Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation

(2019) Shilei Li et al.   SCRIPTA MATERIALIA

Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion

(2019) Christian Tenbrock et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy

(2018) Silvia Marola et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Solid-state additive manufacturing and repairing by cold spraying: A review

(2018) Wenya Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Processing optimisation, mechanical properties and microstructural evolution during selective laser melting of Cu-15Sn high-tin bronze

(2018) Zhongfa Mao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dislocation network in additive manufactured steel breaks strength–ductility trade-off

(2018) Leifeng Liu et al.   Materials Today

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

(2018) Syed A.M. Tofail et al.   Materials Today

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting

(2018) Kun V. Yang et al.   SCRIPTA MATERIALIA

Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

(2018) Joamin Gonzalez-Gutierrez et al.   Materials

Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture

(2018) Chaolin Tan et al.   MATERIALS & DESIGN

Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis

(2018) Shiwen Liu et al.   MATERIALS & DESIGN

Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review

(2018) Y. Kok et al.   MATERIALS & DESIGN

Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys

(2018) A.B. Spierings et al.   MATERIALS & DESIGN

A sensitivity analysis of the columnar-to-equiaxed transition for Ni-based superalloys in electron beam additive manufacturing

(2018) M. Haines et al.   COMPUTATIONAL MATERIALS SCIENCE

Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing

(2018) W. Ou et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Peritectic titanium alloys for 3D printing

(2018) Pere Barriobero-Vila et al.   Nature Communications

3D printing of ceramics: A review

(2018) Zhangwei Chen et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Mitigation of lack of fusion defects in powder bed fusion additive manufacturing

(2018) T. Mukherjee et al.   Journal of Manufacturing Processes

Additive manufacturing of Ti6Al4V alloy: A review

(2018) Shunyu Liu et al.   MATERIALS & DESIGN

Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L

(2018) Mostafa Yakout et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture

(2017) Fengying Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing

(2017) Mang Ni et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of energy density on metallurgy and properties in metal additive manufacturing

(2017) Shahir M. Yusuf et al.   MATERIALS SCIENCE AND TECHNOLOGY

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys

(2017) Stéphane Gorsse et al.   SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

Design for additive manufacturing with site-specific properties in metals and alloys

(2017) S. Tammas-Williams et al.   SCRIPTA MATERIALIA

In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction

(2017) C. Kenel et al.   Scientific Reports

An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties

(2017) Abdollah Saboori et al.   Applied Sciences-Basel

Is the energy density a reliable parameter for materials synthesis by selective laser melting?

(2017) K. G. Prashanth et al.   Materials Research Letters

The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing

(2017) Yen-Ling Kuo et al.   MATERIALS & DESIGN

On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting

(2017) Umberto Scipioni Bertoli et al.   MATERIALS & DESIGN

Normalised model-based processing diagrams for additive layer manufacture of engineering alloys

(2016) Meurig Thomas et al.   ACTA MATERIALIA

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

Epitaxy and Microstructure Evolution in Metal Additive Manufacturing

(2016) Amrita Basak et al.   Annual Review of Materials Research

The metallurgy and processing science of metal additive manufacturing

(2016) W. J. Sames et al.   INTERNATIONAL MATERIALS REVIEWS

Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing

(2016) Eric A. Jägle et al.   JOM

Changing the alloy composition of Al7075 for better processability by selective laser melting

(2016) Maria L. Montero-Sistiaga et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Additive manufacturing of Ni-based superalloys: The outstanding issues

(2016) Moataz M. Attallah et al.   MRS BULLETIN

Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts

(2016) Di Wang et al.   MATERIALS & DESIGN

Printability of alloys for additive manufacturing

(2016) T. Mukherjee et al.   Scientific Reports

Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing

(2015) Beth E. Carroll et al.   ACTA MATERIALIA

Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing

(2015) T. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs

(2015) Swee Leong Sing et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

(2015) W. E. King et al.   Applied Physics Reviews

Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting

(2014) B. Vrancken et al.   ACTA MATERIALIA

Heat transfer and material flow during laser assisted multi-layer additive manufacturing

(2014) V. Manvatkar et al.   JOURNAL OF APPLIED PHYSICS

Metal Additive Manufacturing: A Review

(2014) William E. Frazier   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

(2014) Wayne E. King et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Compositionally graded metals: A new frontier of additive manufacturing

(2014) Douglas C. Hofmann et al.   JOURNAL OF MATERIALS RESEARCH

Site specific control of crystallographic grain orientation through electron beam additive manufacturing

(2014) R. R. Dehoff et al.   MATERIALS SCIENCE AND TECHNOLOGY

Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process

(2014) V. Manvatkar et al.   MATERIALS SCIENCE AND TECHNOLOGY

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies

(2012) Lawrence E. Murr et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructural Characterization of Laser-Deposited Al 4047 Alloy

(2012) G. P. Dinda et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Balling behavior of stainless steel and nickel powder during selective laser melting process

(2011) Ruidi Li et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing

(2010) R.R. Dehoff et al.   ACTA MATERIALIA

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

(2010) Lore Thijs et al.   ACTA MATERIALIA

The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V

(2010) S. S. Al-Bermani et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods

(2009) Dongdong Gu et al.   MATERIALS & DESIGN

Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures

(2009) Srikanth Bontha et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING