Effect of laser shock peening on corrosion behaviors of ultra-high strength Al-Zn-Mg-Cu alloys prepared by spray forming and ingot metallurgy

Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt.%) alloy processed by T6 or thermomechanical treatment

(2021) Cheng Guo et al.   CORROSION SCIENCE

The Advancement of 7XXX Series Aluminum Alloys for Aircraft Structures: A Review

(2021) Bo Zhou et al.   Metals

On the corrosion of a high solute Al-Zn-Mg alloy produced by laser powder bed fusion

(2021) A.P. Babu et al.   CORROSION SCIENCE

Effect of aging treatment on microstructure, mechanical and corrosion properties of 7055 aluminum alloy prepared using powder by-product

(2021) Tao Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Numerical investigation of the effect of laser shock peening parameters on the residual stress and deformation response of 7075 aluminum alloy

(2021) Y.F. Xiang et al.   OPTIK

Characterization of mechanical and corrosion properties of cryorolled Al 1100 alloy: Effect of annealing and solution treatment

(2021) S.A. ZAKARIA et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Influencing mechanisms of heat treatments on microstructure and comprehensive properties of Al–Zn–Mg–Cu alloy formed by spray forming

(2020) Lijun Wei et al.   Journal of Materials Research and Technology-JMR&T

Experimental and analytical investigation of the effects of laser shock peening processing strategy on fatigue crack growth in thin 2024 aluminium alloy panels

(2020) D.C. van Aswegen et al.   INTERNATIONAL JOURNAL OF FATIGUE

Non-isothermal aging: A heat treatment method that simultaneously improves the mechanical properties and corrosion resistance of ultra-high strength Al-Zn-Mg-Cu alloy

(2020) Weiyi Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Plastic deformation behavior of titanium alloy by warm laser shock peening: Microstructure evolution and mechanical properties

(2020) Xinlei Pan et al.   SURFACE & COATINGS TECHNOLOGY

Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy

(2020) Ni Li et al.   CORROSION SCIENCE

Effect of aging treatment on microstructure and corrosion behavior of Al-Zn-Mg aluminum alloy in aqueous solutions with different aggressive ions

(2019) Pan Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and mechanical properties of an Al-Zn-Cu-Mg alloy processed by hot forming processes followed by heat treatments

(2019) Muhammad Abubaker Khan et al.   MATERIALS CHARACTERIZATION

Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy

(2018) Tsai-Fu Chung et al.   ACTA MATERIALIA

On the importance of irreversibility of corrosion inhibitors for active coating protection of AA2024-T3

(2018) P. Visser et al.   CORROSION SCIENCE

Saltwater corrosion behavior of cold sprayed AA7075 aluminum alloy coatings

(2018) Sieglind Ngai et al.   CORROSION SCIENCE

Effect of repetitious non-isothermal heat treatment on corrosion behavior of Al-Zn-Mg alloy

(2018) Shuai Li et al.   CORROSION SCIENCE

Effect of Zn/Mg ratios on SCC, electrochemical corrosion properties and microstructure of Al-Zn-Mg alloy

(2018) Songyi Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characterization of hot extrusion and heat treatment on mechanical properties in a spray formed ultra-high strength Al-Zn-Mg-Cu alloy

(2018) Xiangdong Wang et al.   MATERIALS CHARACTERIZATION

Mechanical properties and microstructure evolution of ultra-high strength Al-Zn-Mg-Cu alloy processed by room temperature ECAP with post aging

(2018) Weiyi Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improvement of corrosion resistance of AA2024-T3 using femtosecond laser peening without protective and confining medium

(2018) Uroš Trdan et al.   CORROSION SCIENCE

Localized corrosion behavior associated with Al7Cu2Fe intermetallic in Al-Zn-Mg-Cu-Zr alloy

(2018) Yuanwei Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective

(2018) Abolfazl Azarniya et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties, corrosion behavior and microstructures of a non-isothermal ageing treated Al-Zn-Mg-Cu alloy

(2017) Xiaoyan Peng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A Summary of Corrosion Properties of Al-Rich Solid Solution and Secondary Phase Particles in Al Alloys

(2017) Jichao Li et al.   Metals

Tensile properties, residual stress distribution and grain arrangement as a function of sheet thickness of Mg–Al–Mn alloy subjected to two-sided and simultaneous LSP impacts

(2016) K.Y. Luo et al.   APPLIED SURFACE SCIENCE

Laser alloyed Al-W coatings on aluminum for enhanced corrosion resistance

(2015) Ravi Shanker Rajamure et al.   APPLIED SURFACE SCIENCE

Effects of laser shock peening on stress corrosion behavior of 7075 aluminum alloy laser welded joints

(2015) J.T. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Surface and cut-edge corrosion behavior of Zn-Mg-Al alloy-coated steel sheets as a function of the alloy coating microstructure

(2015) Min-Suk Oh et al.   METALS AND MATERIALS INTERNATIONAL

Investigation of mechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate

(2015) Wenchao Yang et al.   MATERIALS & DESIGN

SEM/EDS characterization of laser shock peening effect on localized corrosion of Al alloy in a near natural chloride environment

(2014) Uroš Trdan et al.   CORROSION SCIENCE

Initial formation of corrosion products on pure zinc and MgZn2 examinated by XPS

(2013) E. Diler et al.   CORROSION SCIENCE

Microstructure and tensile properties of large-size 7055 aluminum billets fabricated by spray forming rapid solidification technology

(2013) Hongchun Yu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of a spray formed and extruded AA7050 recycled alloy

(2013) Henrique A. Godinho et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Dielectric Properties of Materials Showing Constant-Phase-Element (CPE) Impedance Response

(2013) Mark E. Orazem et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding

(2013) Yong Zhao et al.   MATERIALS & DESIGN

The mechanisms of thermal engineered laser shock peening for enhanced fatigue performance

(2012) Yiliang Liao et al.   ACTA MATERIALIA

Evaluation of corrosion resistance of AA6082-T651 aluminium alloy after laser shock peening by means of cyclic polarisation and ElS methods

(2012) Uroš Trdan et al.   CORROSION SCIENCE

Improving corrosion resistance of pure Al through ECAP

(2010) D Song et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Study of Al alloy corrosion in neutral NaCl by the pitting scan technique

(2010) Monica Trueba et al.   MATERIALS CHEMISTRY AND PHYSICS

Localized corrosion of ultrafine-grained Al–Mg model alloys

(2009) J.G. Brunner et al.   ELECTROCHIMICA ACTA

Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy

(2008) B. Zaid et al.   CORROSION SCIENCE