Non-isothermal aging: A heat treatment method that simultaneously improves the mechanical properties and corrosion resistance of ultra-high strength Al-Zn-Mg-Cu alloy

Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy

(2018) Tsai-Fu Chung et al.   ACTA MATERIALIA

Saltwater corrosion behavior of cold sprayed AA7075 aluminum alloy coatings

(2018) Sieglind Ngai et al.   CORROSION SCIENCE

Effect of repetitious non-isothermal heat treatment on corrosion behavior of Al-Zn-Mg alloy

(2018) Shuai Li et al.   CORROSION SCIENCE

Precipitate behavior and mechanical properties of enhanced solution treated Al-Zn-Mg-Cu alloy during non-isothermal ageing

(2018) Xiaoyan Peng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A transmission electron microscopy study of microscopic causes for localized-corrosion morphology variations in the AA7055 Al alloy

(2018) X.B. Yang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of microstructure on exfoliation corrosion resistance in an Al-Zn-Mg alloy

(2018) Xianghan Lu et al.   MATERIALS CHARACTERIZATION

Characterization of hot extrusion and heat treatment on mechanical properties in a spray formed ultra-high strength Al-Zn-Mg-Cu alloy

(2018) Xiangdong Wang et al.   MATERIALS CHARACTERIZATION

Mechanical properties and microstructure evolution of ultra-high strength Al-Zn-Mg-Cu alloy processed by room temperature ECAP with post aging

(2018) Weiyi Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure Evolution and the Resulted Influence on Localized Corrosion in Al-Zn-Mg-Cu Alloy during Non-Isothermal Ageing

(2018) Jun-Zhou Chen et al.   Materials

Role of turbulent flow seawater in the corrosion enhancement of an Al–Zn–Mg alloy: an electrochemical impedance spectroscopy (EIS) analysis of oxygen reduction reaction (ORR)

(2018) Marcela C. Quevedo et al.   Journal of Materials Research and Technology-JMR&T

Optimization of USSP duration for enhanced corrosion resistance of AA7075

(2018) Vaibhav Pandey et al.   ULTRASONICS

Influence of remelting and annealing treatment on corrosion resistance of AlFeNiCoCuCr high entropy alloy in 3.5% NaCl solution

(2018) Xiaorong Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Localized corrosion behavior associated with Al7Cu2Fe intermetallic in Al-Zn-Mg-Cu-Zr alloy

(2018) Yuanwei Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing

(2017) Jinrong Zuo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

An improved thermo-mechanical treatment of high-strength Al–Zn–Mg–Cu alloy for effective grain refinement and ductility modification

(2017) W.T. Huo et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation

(2017) Xuesong Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical properties, corrosion behavior and microstructures of a non-isothermal ageing treated Al-Zn-Mg-Cu alloy

(2017) Xiaoyan Peng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review of surfactants as corrosion inhibitors and associated modeling

(2017) Yakun Zhu et al.   PROGRESS IN MATERIALS SCIENCE

Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys

(2016) Kaka Ma et al.   ACTA MATERIALIA

Influence of repetitious non-isothermal aging on microstructure and strength of Al-Zn-Mg-Cu alloy

(2016) Yuan Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The effects of non-isothermal aging on the strength and corrosion behavior of Al Zn Mg Cu alloy

(2016) Daming Jiang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Non-isothermal ageing of an Al–8Zn–2Mg–2Cu alloy for enhanced properties

(2016) J.T. Jiang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Characterizing precipitate evolution of an Al–Zn–Mg–Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring

(2016) Fulin Jiang et al.   MATERIALS CHARACTERIZATION

Microstructural evolution during non-isothermal annealing of a precipitation-hardenable aluminum alloy: Experiment and simulation

(2015) P. Sepehrband et al.   ACTA MATERIALIA

Some effects of alloy composition on stress corrosion cracking in Al–Zn–Mg–Cu alloys

(2015) S.P. Knight et al.   CORROSION SCIENCE

Mechanism of low exfoliation corrosion resistance due to slow quenching in high strength aluminium alloy

(2015) S.D. Liu et al.   CORROSION SCIENCE

Effect of recrystallization on intergranular fracture and corrosion of Al–Zn–Mg–Cu–Zr alloy

(2015) H.C. Fang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Corrosion and electrochemical behaviors of 7A09 Al–Zn–Mg–Cu alloy in chloride aqueous solution

(2015) Kun ZHOU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Investigation of mechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate

(2015) Wenchao Yang et al.   MATERIALS & DESIGN

Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3 wt.% NaCl solution

(2014) S. Khireche et al.   CORROSION SCIENCE

Substitution of Cu and/or Al in η phase (MgZn2) and the implications for precipitation in Al–Zn–Mg–(Cu) alloys

(2014) M.J. Styles et al.   INTERMETALLICS

Ageing behavior and stress corrosion cracking resistance of a non-isothermally aged Al–Zn–Mg–Cu alloy

(2014) J.T. Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation phenomena in an ultrafine-grained Al alloy

(2013) T. Hu et al.   ACTA MATERIALIA

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

(2013) Kaka Ma et al.   ACTA MATERIALIA

Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy

(2013) D. Bardel et al.   ACTA MATERIALIA

Atomic structure of hardening precipitates in an Al–Mg–Zn–Cu alloy determined by HAADF-STEM and first-principles calculations: relation to η-MgZn2

(2013) Calin D. Marioara et al.   JOURNAL OF MATERIALS SCIENCE

Influence of Al7Cu2Fe intermetallic particles on the localized corrosion of high strength aluminum alloys

(2013) Aline Chemin et al.   MATERIALS & DESIGN

In situ studies of microstructure evolution and properties of an Al–7.5Zn–1.7Mg–1.4Cu–0.12Zr alloy during retrogression and reaging

(2013) Dongmei Liu et al.   MATERIALS & DESIGN

Spherical constituent particles formed by a multistage solution treatment in Al–Zn–Mg–Cu alloys

(2013) X.B. Yang et al.   MATERIALS CHARACTERIZATION

Quantitative study of precipitates in an Al–Zn–Mg–Cu alloy aged with various typical tempers

(2013) Dongmei Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of repetitious-RRA treatment on the strength and SCC resistance of Al–Zn–Mg–Cu alloy

(2011) Guosheng Peng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

T6 heat treatment of rheocasting 7075 Al alloy

(2011) N. Mahathaninwong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al–Zn–Mg–Cu alloy

(2010) T. Marlaud et al.   ACTA MATERIALIA

Effect of solution treatment on the corrosion behaviour of aluminium alloy AA7150: Optimisation for corrosion resistance

(2010) D.K. Xu et al.   CORROSION SCIENCE

Revisiting the precipitation sequence in Al–Zn–Mg-based alloys by high-resolution transmission electron microscopy

(2010) J.Z. Liu et al.   SCRIPTA MATERIALIA

Nanostructural hierarchy increases the strength of aluminium alloys

(2010) Peter V. Liddicoat et al.   Nature Communications

Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy

(2009) G. Sha et al.   ACTA MATERIALIA