Experimental and numerical studies of titanium foil/steel explosively welded clad plate

Microstructure development during explosive welding of metal foil：morphologies, mechanical behaviors and mechanisms

(2021) Ming Yang et al.   COMPOSITES PART B-ENGINEERING

Microstructure characterization and tensile shear failure mechanism of the bonding interface of explosively welded titanium-steel composite

(2021) Qiang Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experimental and numerical approach to titanium-aluminum explosive welding

(2021) Xiaoming Wu et al.   Materials Research Express

Interfacial reactions and microstructure related properties of explosively welded tantalum and steel sheets with copper interlayer

(2021) H. Paul et al.   MATERIALS & DESIGN

Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling

(2020) Zhipo Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Explosive Welding of Thin Aluminum Plate onto Magnesium Alloy Plate Using a Gelatin Layer as a Pressure-Transmitting Medium

(2020) Daisuke Inao et al.   Metals

Fatigue life estimation of explosive cladded transition joints with the use of the spectral method for the case of a random sea state

(2020) Michał Böhm et al.   MARINE STRUCTURES

Detonation process analysis and interface morphology distribution of double vertical explosive welding by SPH 2D/3D numerical simulation and experiment

(2020) Zerui Sun et al.   MATERIALS & DESIGN

Comparative study of energy distribution and interface morphology in parallel and double vertical explosive welding by numerical simulations and experiments

(2020) Zerui Sun et al.   MATERIALS & DESIGN

Characterization of the Microstructure and Bonding Properties of Zirconium-Carbon Steel Clad Materials by Explosive Welding

(2020) Hui Zhao   SCANNING

Numerical and experimental studies on the explosive welding of plates with different initial strength

(2019) Xiang-yu Zeng et al.   Welding in the World

Interfacial Investigation of Explosion-Welded Titanium/Steel Bimetallic Plates

(2019) Qiaoling Chu et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Dissimilar material welding of tantalum foil and Q235 steel plate using improved explosive welding technique

(2019) Ming Yang et al.   MATERIALS & DESIGN

Interactions of PbCl2 with Alkali Salts in Ash Deposits and Effects on Boiler Corrosion

(2018) Jonne Niemi et al.   ENERGY & FUELS

Yield behavior of polystyrene at strain rate 10 6 /s under quasi-isentropic compression

(2018) Xuping Zhang et al.   MECHANICS OF MATERIALS

Microstructure and property inhomogeneity investigations of bonded Zr/Ti/steel trimetallic sheet fabricated by explosive welding

(2017) Jie Ning et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In-situ observation of crack initiation and propagation in Ti/Al composite laminates during tensile test

(2017) Liang Qin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Texture transformations near the bonding zones of the three-layer Al/Ti/Al explosively welded clads

(2017) R. Chulist et al.   MATERIALS CHARACTERIZATION

Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding

(2017) Qiaoling Chu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

(2017) Dagmara Malgorzata Fronczek et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Molecular Dynamics Simulations and Experimental Investigations of Atomic Diffusion Behavior at Bonding Interface in an Explosively Welded Al/Mg Alloy Composite Plate

(2017) Ting-Ting Zhang et al.   Acta Metallurgica Sinica-English Letters

Effect of process parameters on microstructural and mechanical properties of Ti−SS 304L explosive cladding

(2017) Saravanan Somasundaram et al.   Journal of Central South University

Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling

(2015) Miao-Xia Xie et al.   MATERIALS & DESIGN

A Mie-Grüneisen mixture Eulerian model for underwater explosion

(2014) Zongduo Wu et al.   ENGINEERING COMPUTATIONS

Thermal energy storage using thermo-chemical heat pump

(2012) M.A. Hamdan et al.   ENERGY CONVERSION AND MANAGEMENT

Lower boundary in metal explosive welding. Evolution of ideas

(2011) V.I. Lysak et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Numerical study of the mechanism of explosive/impact welding using Smoothed Particle Hydrodynamics method

(2011) Xiao Wang et al.   MATERIALS & DESIGN

The characteristics of in vitro biological activity of titanium surfaces anodically oxidized in chloride solutions

(2010) Y. Shibata et al.   BIOMATERIALS

Hierarchical microstructure of explosive joints: Example of titanium to steel cladding

(2010) J. Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Metallic glass coating on metals plate by adjusted explosive welding technique

(2009) W.D. Liu et al.   APPLIED SURFACE SCIENCE

Shock and detonation properties of solid explosives with gaseous products

(2009) M. Safwat Abdulazeem   JOURNAL OF HAZARDOUS MATERIALS

Internal explosive loading of steel pipes

(2008) N. Rushton et al.   THIN-WALLED STRUCTURES

Homogenization of granular material modeled by a three-dimensional discrete element method

(2007) C. Wellmann et al.   COMPUTERS AND GEOTECHNICS