Machinability of additively manufactured titanium alloys: A comprehensive review
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Machinability of additively manufactured titanium alloys: A comprehensive review
Authors
Keywords
Machining, Titanium alloys, Additive manufacturing, Cutting forces, Cutting temperature, Tool wear, Surface integrity, Micromachining, Anisotropy
Journal
Journal of Manufacturing Processes
Volume 75, Issue -, Pages 72-99
Publisher
Elsevier BV
Online
2022-01-11
DOI
10.1016/j.jmapro.2022.01.007
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Role of deposition strategy and fill depth on the tensile and fatigue performance of 300 M repaired through laser directed energy deposition
- (2021) Cameron Barr et al. INTERNATIONAL JOURNAL OF FATIGUE
- An accurate transient model for temperature fluctuation on localized shear band in serrated chip formation
- (2021) Xuelin Chen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Finite Element Analysis of the Milling of Ti6Al4V Titanium Alloy Laser Additive Manufacturing Parts
- (2021) Zhaohui Ren et al. Applied Sciences-Basel
- Cutting responses of additive manufactured Ti6Al4V with solid ceramic tool under dry high-speed milling processes
- (2020) Heng Zhang et al. CERAMICS INTERNATIONAL
- Analysis of the Machining Process of Titanium Ti6Al-4V Parts Manufactured by Wire Arc Additive Manufacturing (WAAM)
- (2020) Fernando Veiga et al. Materials
- The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V
- (2020) David Lunt et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tool wear, surface quality, and residual stresses analysis of micro-machined additive manufactured Ti–6Al–4V under dry and MQL conditions
- (2020) Waqas Khaliq et al. TRIBOLOGY INTERNATIONAL
- Influence of additive manufacturing-induced anisotropy on tool wear in end milling of Ti6Al4V
- (2020) Lucia Lizzul et al. TRIBOLOGY INTERNATIONAL
- Machining of directed energy deposited Ti6Al4V using adaptive control
- (2020) Olusola Oyelola et al. Journal of Manufacturing Processes
- Machinablility of titanium matrix composites (TMC) reinforced with multi-walled carbon nanotubes
- (2020) Guangxian Li et al. Journal of Manufacturing Processes
- The manufacturing and the application of polycrystalline diamond tools – A comprehensive review
- (2020) Guangxian Li et al. Journal of Manufacturing Processes
- Effect of build orientation and post-build heat treatment on the mechanical properties of cold spray additively manufactured copper parts
- (2020) N. Hutasoit et al. The International Journal of Advanced Manufacturing Technology
- Mechanical Properties of SLM-Printed Aluminium Alloys: A Review
- (2020) Panneer Ponnusamy et al. Materials
- Machinability of SLM-produced Ti6Al4V titanium alloy parts
- (2020) Kassim S. Al-Rubaie et al. Journal of Manufacturing Processes
- Diffraction Line Profile Analysis of 3D Wedge Samples of Ti-6Al-4V Fabricated Using Four Different Additive Manufacturing Processes
- (2019) Ryan Cottam et al. Metals
- Experimental investigation on machinability of DMLS Ti6Al4V under dry drilling process
- (2019) Jiaqiang Dang et al. MATERIALS AND MANUFACTURING PROCESSES
- Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718
- (2019) Bin Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy
- (2019) Romali Biswal et al. INTERNATIONAL JOURNAL OF FATIGUE
- ‘Cold spray +’ as a new hybrid additive manufacturing technology: a literature review
- (2019) Wenya Li et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Improving surface integrity and corrosion resistance of additive manufactured Ti6Al4V alloy by cryogenic machining
- (2019) R. Bertolini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analysis of Secondary Adhesion Wear Mechanism on Hard Machining of Titanium Aerospace Alloy
- (2019) Moises Batista Ponce et al. Materials
- Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs
- (2019) Chithajalu Kiran Sagar et al. Defence Technology
- Quantitative analysis of cooling and lubricating effects of graphene oxide nanofluids in machining titanium alloy Ti6Al4V
- (2019) Guangxian Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dynamic mechanical properties and machinability characteristics of selective laser melted and forged Ti6Al4V
- (2019) Weiwei Ming et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- New observations on wear characteristics of solid Al2O3/Si3N4 ceramic tool in high speed milling of additive manufactured Ti6Al4V
- (2019) Jiaqiang Dang et al. CERAMICS INTERNATIONAL
- Chip formation and hole quality in dry drilling additive manufactured Ti6Al4V
- (2019) Weiwei Ming et al. MATERIALS AND MANUFACTURING PROCESSES
- Study on machinability of additively manufactured and conventional titanium alloys in micro-milling process
- (2019) F. Hojati et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- MPM simulations of high-speed machining of Ti6Al4V titanium alloy considering dynamic recrystallization phenomenon and thermal conductivity
- (2018) X.Y. Gu et al. APPLIED MATHEMATICAL MODELLING
- Machining-induced surface transformations of magnesium alloys to enhance corrosion resistance in human-like environment
- (2018) Stefania Bruschi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions
- (2018) Morteza Sadeghifar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
- (2018) Hooyar Attar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity of machined additively manufactured Ti alloys
- (2018) Giovanna Rotella et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys
- (2018) Masoud Ahmadi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder
- (2018) Keivan A. Nazari et al. MATERIALS LETTERS
- The effect of titanium alloy chemistry on machining induced tool crater wear characteristics
- (2018) Oliver Hatt et al. WEAR
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- Inverse determination of Johnson–Cook model constants of ultra-fine-grained titanium based on chip formation model and iterative gradient search
- (2018) Jinqiang Ning et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining of GTAW additively manufactured Ti-6Al-4V structures
- (2018) N. Hoye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review on the Fatigue Behavior of Ti-6Al-4V Fabricated by Electron Beam Melting Additive Manufacturing
- (2018) Andrew H. Chern et al. INTERNATIONAL JOURNAL OF FATIGUE
- Insights into Machining of a β Titanium Biomedical Alloy from Chip Microstructures
- (2018) Damon Kent et al. Metals
- A hybrid modelling approach towards prediction of cutting forces in micro end milling of Ti-6Al-4V titanium alloy
- (2018) Priyabrata Sahoo et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water
- (2018) Litao Chang et al. ACTA MATERIALIA
- A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
- (2017) B. Boswell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
- (2017) Ali Fatemi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Dry machining: A step towards sustainable machining – Challenges and future directions
- (2017) Gyanendra Singh Goindi et al. JOURNAL OF CLEANER PRODUCTION
- Surface texturing for tribology enhancement and its application on drill tool for the sustainable machining of titanium alloy
- (2017) S. Niketh et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigation on the feasibility of dry and cryogenic machining as sustainable strategies when turning Ti6Al4V produced by Additive Manufacturing
- (2017) A. Bordin et al. JOURNAL OF CLEANER PRODUCTION
- Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)
- (2017) Bartłomiej Wysocki et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: Microstructure and mechanical properties
- (2017) Xuezhi Shi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation on the burr formation mechanism in micro cutting
- (2017) Xian Wu et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A comparative study of mechanical properties and machinability of wrought and additive manufactured (selective laser melting) titanium alloy – Ti-6Al-4V
- (2017) Manikandakumar Shunmugavel et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Coupling machining and heat treatment to enhance the wear behaviour of an Additive Manufactured Ti6Al4V titanium alloy
- (2017) Stefania Bruschi et al. TRIBOLOGY INTERNATIONAL
- On the tool wear mechanisms in dry and cryogenic turning Additive Manufactured titanium alloys
- (2017) S. Sartori et al. TRIBOLOGY INTERNATIONAL
- Wear mechanisms and performance of abrasively ground polycrystalline diamond tools of different diamond grains in machining titanium alloy
- (2017) Guangxian Li et al. Journal of Manufacturing Processes
- On the performance of modified Zerilli-Armstrong constitutive model in simulating the metal-cutting process
- (2017) Murali Mohan Gurusamy et al. Journal of Manufacturing Processes
- Molecular dynamics simulation of the diffusion behaviour between Co and Ti and its effect on the wear of WC/Co tools when titanium alloy is machined
- (2016) Dashan Bai et al. CERAMICS INTERNATIONAL
- Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites
- (2016) Roland Bejjani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Environmentally clean micromilling of electron beam melted Ti6Al4V
- (2016) S. Bruschi et al. JOURNAL OF CLEANER PRODUCTION
- Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
- (2016) Anuj Kumar Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
- (2016) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts
- (2016) Haibin Geng et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing
- (2016) D. MacDonald et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of the machining parameters and cooling strategies on the wear behavior of wrought and additive manufactured Ti6Al4V for biomedical applications
- (2016) S. Bruschi et al. TRIBOLOGY INTERNATIONAL
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- A physically based constitutive model for simulation of segmented chip formation in orthogonal cutting of commercially pure titanium
- (2015) Shreyes N. Melkote et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Performance and wear analysis of polycrystalline diamond (PCD) tools manufactured with different methods in turning titanium alloy Ti-6Al-4V
- (2015) Guangxian Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy
- (2015) R. A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Sustainable machining of high temperature Nickel alloy – Inconel 718: part 2 – chip breakability and optimization
- (2015) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718™
- (2015) A.R.C. Sharman et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti–6Al–4V alloy
- (2015) Shoujin Sun et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy
- (2015) A. Bordin et al. WEAR
- Processing window and evaporation phenomena for Ti–6Al–4V produced by selective electron beam melting
- (2014) V. Juechter et al. ACTA MATERIALIA
- Laser-assisted milling strategies with different cutting tool paths
- (2014) M. J. Bermingham et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power
- (2014) R. A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Advantages of milling and drilling Ti-6Al-4V components with high-pressure coolant
- (2014) M. J. Bermingham et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review on Minimum Quantity Lubrication for Machining Processes
- (2014) Vishal S. Sharma et al. MATERIALS AND MANUFACTURING PROCESSES
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
- (2013) G. Rotella et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
- (2013) H. K. Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Mechanical and Microstructural Characterization of Cold-Sprayed Ti-6Al-4V After Heat Treatment
- (2013) P. Vo et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
- (2013) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Framework for evaluation of the relative contribution of the process on porosity–cutting force dependence in micromilling of titanium foams
- (2013) Mohammadmehdi Abolghasemi Fakhri et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Development of new metallic alloys for biomedical applications
- (2012) Mitsuo Niinomi et al. Acta Biomaterialia
- Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding
- (2012) Parash Kalita et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V
- (2012) M.J. Bermingham et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy
- (2012) R.A. Rahman Rashid et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloy
- (2012) Myriam Gharbi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
- (2012) Thanongsak Thepsonthi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The effect of cutting speed and heat treatment on the fatigue life of Grade 5 and Grade 23 Ti–6Al–4V alloys
- (2012) W. Niu et al. MATERIALS & DESIGN
- Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
- (2012) Fude Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V
- (2011) Anhai Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
- (2011) M.J. Bermingham et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Unified cutting force model for turning, boring, drilling and milling operations
- (2011) M. Kaymakci et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti–6Al–4V cutting
- (2011) M.J. Bermingham et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization and modeling of burr formation in micro-end milling
- (2011) Ravi Lekkala et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Porosity and cutting forces: from macroscale to microscale machining correlations
- (2011) O R Tutunea-Fatan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Machinability of a near beta titanium alloy
- (2011) R A Rahman Rashid et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations
- (2010) T. Özel et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Tool edge radius effect on cutting temperature in micro-end-milling process
- (2010) Kai Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti–6Al–4V
- (2010) Mohammad Sima et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining induced surface integrity in titanium and nickel alloys: A review
- (2010) Durul Ulutan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity in cryogenic machining of nickel based alloy—Inconel 718
- (2010) F. Pusavec et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal Deposition
- (2010) Bernd Baufeld et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effects of coolant pressure on chip formation while turning Ti6Al4V alloy
- (2009) Suresh Palanisamy et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Characteristics of cutting forces and chip formation in machining of titanium alloys
- (2009) S. Sun et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Subsurface Deformation After Dry Machining of Grade 2 Titanium
- (2008) M. S. Dargusch et al. ADVANCED ENGINEERING MATERIALS
- A review of cryogenic cooling in machining processes
- (2008) Yakup Yildiz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V
- (2008) L.E. Murr et al. MATERIALS CHARACTERIZATION
- Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
- (2008) G.P. Dinda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Deposition of Ti–6Al–4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties
- (2008) Sui Him Mok et al. SURFACE & COATINGS TECHNOLOGY
- Diffusion wear in dry cutting of Ti–6Al–4V with WC/Co carbide tools
- (2008) Deng Jianxin et al. WEAR
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Improving tool life using cryogenic cooling
- (2007) Ahsan Ali Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started