Fused-Filament Fabrication of Short Carbon Fiber-Reinforced Polyamide: Parameter Optimization for Improved Performance under Uniaxial Tensile Loading

Mechanical and thermal study of 3D printing composite filaments from wind turbine waste

(2021) Amirmohammad Rahimizadeh et al.   POLYMER COMPOSITES

High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances

(2021) Sithiprumnea Dul et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Process-structure-property analysis of short carbon fiber reinforced polymer composite via fused filament fabrication

(2021) Shenli Pei et al.   Journal of Manufacturing Processes

A systematic review on high‐performance fiber‐reinforced 3D printed thermoset composites

(2021) Francisco M. Monticeli et al.   POLYMER COMPOSITES

Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites

(2021) K. Rodzeń et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Annealing of chopped and continuous fibre reinforced polyamide 6 produced by fused filament fabrication

(2021) Michael Handwerker et al.   COMPOSITES PART B-ENGINEERING

A Review on Reinforcement Methods for Polymeric Materials Processed Using Fused Filament Fabrication (FFF)

(2021) Juan Pratama et al.   Polymers

Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization

(2021) Yahya Abderrafai et al.   MATERIALS & DESIGN

Machinability of PA12 and short fibre–reinforced PA12 materials produced by fused filament fabrication

(2020) Isaac Ferreira et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Preferred orientation of chopped fibers in polymer-based composites processed by selective laser sintering and fused deposition modeling: Effects on mechanical properties

(2020) Claudio Badini et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)

(2020) Elena Verdejo de Toro et al.   Materials

On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion

(2020) Fabrizia Caiazzo et al.   Materials

Diagnosis of Alzheimer's disease using universum support vector machine based recursive feature elimination (USVM-RFE)

(2020) B. Richhariya et al.   Biomedical Signal Processing and Control

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

(2020) Peng WANG et al.   Chinese Journal of Aeronautics

Current status of carbon fibre and carbon fibre composites recycling

(2020) Jin Zhang et al.   COMPOSITES PART B-ENGINEERING

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

(2020) Peng Wang et al.   COMPOSITES PART B-ENGINEERING

3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication—A Review

(2020) Andrew N. Dickson et al.   Polymers

Fused deposition modeling 3D printing of polyamide-based composites and its applications

(2020) Xu Zhang et al.   COMPOSITES COMMUNICATIONS

Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review

(2020) João Pedro Reis et al.   Materials

Enhanced credit card fraud detection based on SVM-recursive feature elimination and hyper-parameters optimization

(2020) Naoufal Rtayli et al.   Journal of Information Security and Applications

Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites

(2020) Xingshuang Peng et al.   COMPOSITES COMMUNICATIONS

Effect of Scanning and Support Strategies on Relative Density of SLM-ed H13 Steel in Relation to Specimen Size

(2019) Tomasz Kurzynowski et al.   Materials

Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide

(2019) Wenli Ye et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Interfacial adhesion between carbon fibers and nylon 6: Effect of fiber surface chemistry and grafting of nano-SiO2

(2019) Tao Zhang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

(2019) J.M. Chacón et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Pred-BVP-Unb: Fast prediction of bacteriophage Virion proteins using un-biased multi-perspective properties with recursive feature elimination

(2019) Muhammad Arif et al.   GENOMICS

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

(2019) Shouling Ding et al.   POLYMER TESTING

A review on fibre reinforced composite printing via FFF

(2019) Isaac Ferreira et al.   RAPID PROTOTYPING JOURNAL

Effect of layer thickness and cross-section geometry on the tensile and compression properties of 3D printed ABS

(2019) Junior Nomani et al.   Materials Today Communications

Advances in 3D printing of thermoplastic polymer composites and nanocomposites

(2019) Arnaldo D. Valino et al.   PROGRESS IN POLYMER SCIENCE

Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses

(2019) Yu Zhao et al.   MATERIALS & DESIGN

Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties

(2019) S. Garzon-Hernandez et al.   MATERIALS & DESIGN

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

(2019) Nekoda van de Werken et al.   Additive Manufacturing

Enhanced interfacial properties of carbon fiber reinforced polyamide 6 composites by grafting graphene oxide onto fiber surface

(2018) Yunyun Ma et al.   APPLIED SURFACE SCIENCE

Additive layer manufacturing of poly (ether ether ketone) via FDM

(2018) Marianna Rinaldi et al.   COMPOSITES PART B-ENGINEERING

Recent advances in carbon-fiber-reinforced thermoplastic composites: A review

(2018) Shan-Shan Yao et al.   COMPOSITES PART B-ENGINEERING

Effect of polyurethane sizing on carbon fibers surface and interfacial adhesion of fiber/polyamide 6 composites

(2018) Tao Zhang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process

(2018) Vladimir Kuznetsov et al.   Polymers

Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling

(2018) Guangxin Liao et al.   MATERIALS & DESIGN

Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics

(2018) G.D. Goh et al.   MATERIALS & DESIGN

Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion

(2018) Iñigo Flores Ituarte et al.   Polymers

Manufacturing and 3D printing of continuous carbon fiber prepreg filament

(2017) Qingxi Hu et al.   JOURNAL OF MATERIALS SCIENCE

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

(2017) Chuncheng Yang et al.   RAPID PROTOTYPING JOURNAL

Methods for Real-Time Prediction of the Mode of Travel Using Smartphone-Based GPS and Accelerometer Data

(2017) Bryan Martin et al.   SENSORS

A study on the failure behavior and mechanical properties of unidirectional fiber reinforced thermosetting and thermoplastic composites

(2016) Yan Ma et al.   COMPOSITES PART B-ENGINEERING

Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite

(2016) Zhenzhen Quan et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation

(2016) Ryosuke Matsuzaki et al.   Scientific Reports

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

(2015) Fuda Ning et al.   COMPOSITES PART B-ENGINEERING

A highly accurate protein structural class prediction approach using auto cross covariance transformation and recursive feature elimination

(2015) Xiaowei Li et al.   COMPUTATIONAL BIOLOGY AND CHEMISTRY

Highly oriented carbon fiber–polymer composites via additive manufacturing

(2014) Halil L. Tekinalp et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites

(2013) Nevin Gamze Karsli et al.   COMPOSITES PART B-ENGINEERING

Effect of processing conditions on the bonding quality of FDM polymer filaments

(2008) Q. Sun et al.   RAPID PROTOTYPING JOURNAL