Effect of laser shock peening on the corrosion properties of Ti-6Al-3Nb-2Zr-1Mo alloy

Influence of Surface Nano-Structuring on Microstructure, Corrosion Behavior and Osteoblast Response of Commercially Pure Titanium Treated Through Ultrasonic Shot Peening

(2022) Pankaj Chauhan et al.   JOM

Effect of surface nano-crystallization induced by supersonic fine particles bombarding on microstructure and mechanical properties of 300M steel

(2021) Tian Zhou et al.   SURFACE & COATINGS TECHNOLOGY

Laser shock peening regulating aluminum alloy surface residual stresses for enhancing the mechanical properties: Roles of shock number and energy

(2021) Zhaoru He et al.   SURFACE & COATINGS TECHNOLOGY

Effect of supersonic fine particle bombardment on microstructure and fatigue properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy at different temperatures

(2021) Yongli Wu et al.   SURFACE & COATINGS TECHNOLOGY

Effect of ultrasonic surface rolling on surface layer properties and fretting wear properties of titanium alloy Ti5Al4Mo6V2Nb1Fe

(2020) Zhaojun Ren et al.   SURFACE & COATINGS TECHNOLOGY

Microstructural Modification and Tensile Behavior of IF Steel Processed through Surface Mechanical Attrition Treatment

(2020) Yagnesh Shadangi et al.   JOM

The corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy: effects of HCl concentration and temperature

(2020) Baoxian Su et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and Properties of Ti80 Alloy Fabricated by Hydrogen-Assisted Blended Elemental Powder Metallurgy

(2020) Baicheng Wang et al.   Frontiers in Materials

Annealed microstructure dependent corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy

(2020) Baoxian Su et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium

(2020) Angshuman Chattopadhyay et al.   OPTICS AND LASER TECHNOLOGY

Laser shock peening (LSP): Electrochemical and hydrodynamic investigation of corrosion protection pre-treatment for a copper surface in 3.5 % NaCl medium

(2020) V.I. Chukwuike et al.   CORROSION SCIENCE

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

(2020) Weiju Jia et al.   VACUUM

Effect of laser shock peening on electrochemical corrosion resistance of IN718 superalloy

(2018) Chengyi Ning et al.   APPLIED OPTICS

Simultaneous grain refinement and nanoscale spinodal decomposition of β phase in Ti-Nb-Ta-Zr alloy induced by ultrasonic mechanical impacts

(2018) Mehdi Kheradmandfard et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of laser shock peening on microstructure and hot corrosion of TC11 alloy

(2018) Zhaopeng Tong et al.   SURFACE & COATINGS TECHNOLOGY

Effect of Laser Shock Peening on Residual Stress, Microstructure and Hot Corrosion Behavior of Damage-Tolerant TC21 Titanium Alloy

(2018) Yongxiang Geng et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Surface nanocrystallization and gradient structure developed in the bulk TC4 alloy processed by shot peening

(2016) Y.G. Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Electrochemical performances of Al–0.5Mg–0.1Sn–0.02In alloy in different solutions for Al–air battery

(2015) Ma Jingling et al.   JOURNAL OF POWER SOURCES

Effect of LASER shock peening on microstructure, mechanical properties and corrosion behavior of interstitial free steel

(2015) Y. Shadangi et al.   SURFACE & COATINGS TECHNOLOGY

The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05M sulfuric acid

(2014) Z.B. Wang et al.   ELECTROCHIMICA ACTA

Performance of Al−1Mg−1Zn−0.1Ga−0.1Sn as anode for Al-air battery

(2014) Jingling Ma et al.   ELECTROCHIMICA ACTA

Deforming TC6 titanium alloys at ultrahigh strain rates during multiple laser shock peening

(2013) Liucheng Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance

(2013) Xiangfan Nie et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING