Pyrolysis of polyolefin plastic waste and potential applications in asphalt road construction: A technical review

Pyrolysis: An effective technique for degradation of COVID-19 medical wastes

(2021) Selvakumar Dharmaraj et al.   CHEMOSPHERE

Rheological properties of aged bitumen rejuvenated by polymer modified bio-derived rejuvenator

(2021) Tianling Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermochemical Recycling of Waste Plastics by Pyrolysis: A Review

(2021) Vineet Kumar Soni et al.   ENERGY & FUELS

Life Cycle Assessment of Sustainable Asphalt Pavement Solutions Involving Recycled Aggregates and Polymers

(2021) Cristina Oreto et al.   Materials

Enhanced Dry Process Method for Modified Asphalt Containing Plastic Waste

(2021) Hasanain Radhi Radeef et al.   Frontiers in Materials

Influence of different polyethylene wax additives on the performance of modified asphalt binders and mixtures

(2021) Yu Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Bibliometric analysis of research trends on the thermochemical conversion of plastics during 1990–2020

(2021) Roomana Khatun et al.   Journal of Cleaner Production

Effect of Waste Polyethylene and Wax-Based Additives on Bitumen Performance

(2021) Luca Desidery et al.   Polymers

Energy and Environmental Life Cycle Assessment of Sustainable Pavement Materials and Technologies for Urban Roads

(2020) Filippo G. Praticò et al.   Sustainability

Pyro-Oil and Wax Recovery from Reclaimed Plastic Waste in a Continuous Auger Pyrolysis Reactor

(2020) Sultan Majed Al-Salem et al.   Energies

Recent applications of waste solid materials in pavement engineering

(2020) Zifeng Zhao et al.   WASTE MANAGEMENT

Recyclability of Asphalt Mixtures with Crumb Rubber Incorporated by Dry Process: A Laboratory Investigation

(2020) Israel Rodríguez-Fernández et al.   Materials

Performance of Different Catalysts for the In Situ Cracking of the Oil-Waxes Obtained by the Pyrolysis of Polyethylene Film Waste

(2020) Lucía Quesada et al.   Sustainability

Thermochemical conversion of plastic waste to fuels: a review

(2020) Sonil Nanda et al.   Environmental Chemistry Letters

A comprehensive review of warm mix asphalt mixtures-laboratory to field

(2020) Mayank Sukhija et al.   CONSTRUCTION AND BUILDING MATERIALS

Recycling waste plastics in roads: A life-cycle assessment study using primary data

(2020) J. Santos et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Reclaimed Polymers as Asphalt Binder Modifiers for More Sustainable Roads: A Review

(2019) Luzana Brasileiro et al.   Sustainability

Value-Added Application of Waste Rubber and Waste Plastic in Asphalt Binder as a Multifunctional Additive

(2019) Tianqing Ling et al.   Materials

Bitumen and Bitumen Modification: A Review on Latest Advances

(2019) Michele Porto et al.   Applied Sciences-Basel

Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management

(2019) Ana Antelava et al.   ENVIRONMENTAL MANAGEMENT

Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC)

(2019) S.M. Al-Salem   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Sustainable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures

(2019) Safeer Haider et al.   CONSTRUCTION AND BUILDING MATERIALS

Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)

(2018) Laura S. Diaz-Silvarrey et al.   GREEN CHEMISTRY

Intermediate pyrolysis of organic fraction of municipal solid waste and rheological study of the pyrolysis oil for potential use as bio-bitumen

(2018) Yang Yang et al.   JOURNAL OF CLEANER PRODUCTION

EVALUATION OF POST-CONSUMER MIXED POLYOLEFINES AND THEIR INJECTION MOULDED BLENDS WITH VIRGIN POLYETHYLENE

(2018) Laurens Delva et al.   Environmental Engineering and Management Journal

Thermal Properties of High Density Polyethylene-Kenaf Cellulose Composites

(2018) Behjat Tajeddin et al.   POLYMERS & POLYMER COMPOSITES

Pyrolysed Wax from Recycled Crosslinked Polyethylene as a Warm-Mix Asphalt (WMA) Additive for Crumb-Rubber-Modified Asphalt

(2018) L. Shang et al.   Progress in Rubber Plastics and Recycling Technology

Characterization of crumb tire rubber lightly pyrolyzed in waste cooking oil and the properties of its modified bitumen

(2018) Ruikun Dong et al.   CONSTRUCTION AND BUILDING MATERIALS

Life-cycle analysis of fuels from post-use non-recycled plastics

(2017) Pahola Thathiana Benavides et al.   FUEL

A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)

(2017) S.M. Al-Salem et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

The plastic in microplastics: A review

(2017) Anthony L. Andrady   MARINE POLLUTION BULLETIN

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

(2017) Gartzen Lopez et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts

(2017) R. Miandad et al.   WASTE MANAGEMENT

Mechanical and chemical recycling of solid plastic waste

(2017) Kim Ragaert et al.   WASTE MANAGEMENT

Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis

(2017) Sachin Kumar et al.   BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING

Physical–chemical properties of aged asphalt rejuvenated by bio-oil derived from biodiesel residue

(2016) Minghui Gong et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives

(2016) Huayang Yu et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparative analysis of the performance of asphalt concretes modified by dry way with polymeric waste

(2016) Pedro Lastra-González et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on pyrolysis of plastic wastes

(2016) Shafferina Dayana Anuar Sharuddin et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation on storage stability and phase separation behaviour of polymer-modified bitumen

(2016) Jiqing Zhu et al.   International Journal of Pavement Engineering

Rutting and moisture resistance evaluation of polyethylene wax–modified asphalt mixtures

(2016) Mostafa Nakhaei et al.   PETROLEUM SCIENCE AND TECHNOLOGY

Plastics to fuel: a review

(2016) Bidhya Kunwar et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Temperature and time influence on the waste plastics pyrolysis in the fixed bed reactor

(2016) Sasa Papuga et al.   Thermal Science

Surface microstructure of bitumen characterized by atomic force microscopy

(2015) Xiaokong Yu et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Storage stability and rheological properties of asphalt modified with waste packaging polyethylene and organic montmorillonite

(2015) Ruien Yu et al.   APPLIED CLAY SCIENCE

An overview on alternative binders for flexible pavement

(2015) Md Maniruzzaman A. Aziz et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance of recycled plastic waste modified asphalt binder in Saudi Arabia

(2015) M. A. Dalhat et al.   International Journal of Pavement Engineering

Current state and future prospects of plastic waste as source of fuel: A review

(2015) S.L. Wong et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Influence of polymer modification on asphalt binder dynamic and steady flow viscosities

(2014) F. Cardone et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance evaluation of bitumen modified by various types of waste plastics

(2014) Sevil Köfteci et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation process to affect stability in waste polyethylene-modified bitumen

(2014) Changqing Fang et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil

(2014) Faisal Abnisa et al.   ENERGY CONVERSION AND MANAGEMENT

Polymer modification of bitumen: Advances and challenges

(2014) Jiqing Zhu et al.   EUROPEAN POLYMER JOURNAL

Evaluation of rutting properties of high density polyethylene modified binders

(2014) Fereydoon Moghadas Nejad et al.   MATERIALS AND STRUCTURES

Effect of high density polyethylene on the fatigue and rutting performance of hot mix asphalt – a laboratory study

(2014) Fereidoon Moghadas Nejad et al.   Road Materials and Pavement Design

A life cycle assessment of in-place recycling and conventional pavement construction and maintenance practices

(2014) João Santos et al.   Structure and Infrastructure Engineering

Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity

(2013) Maite Artetxe et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

A review of using waste and virgin polymer in pavement

(2012) Zahra Niloofar Kalantar et al.   CONSTRUCTION AND BUILDING MATERIALS

Simplified dynamic simulation model of plastic waste pyrolysis in laboratory and pilot scale tubular reactor

(2012) B. Csukás et al.   FUEL PROCESSING TECHNOLOGY

General Rheological Properties of Fractionated Switchgrass Bio-Oil as a Pavement Material

(2012) Mohamed Abdel Raouf et al.   Road Materials and Pavement Design

High and Low Temperature Properties of FT-Paraffin-Modified Bitumen

(2012) Hassan Fazaeli et al.   Advances in Materials Science and Engineering

Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud

(2011) A. López et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Laboratory evaluation of HMA with high density polyethylene as a modifier

(2011) Moatasim Attaelmanan et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermal and catalytic degradation of pyrolytic waxy oil in a plug flow reactor

(2011) Kyong-Hwan Lee et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

(2011) M. Arabiourrutia et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices

(2011) J. P. Mofokeng et al.   JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

Using waste plastic bottles as additive for stone mastic asphalt

(2011) Esmaeil Ahmadinia et al.   MATERIALS & DESIGN

A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading

(2011) Eoin Butler et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Pyrolysis of polyolefins for increasing the yield of monomers’ recovery

(2011) Pawel J. Donaj et al.   WASTE MANAGEMENT

Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste

(2011) A. Adrados et al.   WASTE MANAGEMENT

Effect of waste plastic as modifier on thermal stability and degradation kinetics of bitumen/waste plastics blend

(2010) M. Naskar et al.   THERMOCHIMICA ACTA

A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep test

(2009) Shu Wei Goh et al.   CONSTRUCTION AND BUILDING MATERIALS

Accumulated strain prediction of polypropylene modified marshall specimens in repeated creep test using artificial neural networks

(2009) Serkan Tapkın et al.   EXPERT SYSTEMS WITH APPLICATIONS

Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor

(2009) N. Miskolczi et al.   FUEL PROCESSING TECHNOLOGY

Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor

(2009) Su-Hwa Jung et al.   FUEL PROCESSING TECHNOLOGY

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

(2009) Jude A. Onwudili et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Repeated Creep Behavior of Polypropylene Fiber-Reinforced Bituminous Mixtures

(2009) Serkan Tapkın et al.   JOURNAL OF TRANSPORTATION ENGINEERING

Plastics recycling: challenges and opportunities

(2009) J. Hopewell et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES

The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals

(2009) S.M. Al-Salem et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Recycling and recovery routes of plastic solid waste (PSW): A review

(2009) S.M. Al-Salem et al.   WASTE MANAGEMENT

The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification

(2008) Didier Lesueur   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Effect of polyethylene on life of flexible pavements

(2008) A.I. Al-Hadidy et al.   CONSTRUCTION AND BUILDING MATERIALS

Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review

(2008) J. Aguado et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Pyrolysis of the rejects of a waste packaging separation and classification plant

(2008) I. de Marco et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review

(2008) Francisco Vilaplana et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Mechanistic approach for polypropylene-modified flexible pavements

(2008) A.I. Al-Hadidy et al.   MATERIALS & DESIGN

Development of a recycled polymer modified binder for use in stone mastic asphalt

(2008) Donnchadh Casey et al.   RESOURCES CONSERVATION AND RECYCLING

The effect of polypropylene fibers on asphalt performance

(2007) Serkan Tapkın   BUILDING AND ENVIRONMENT