Pyro-Oil and Wax Recovery from Reclaimed Plastic Waste in a Continuous Auger Pyrolysis Reactor

On the Kinetics of Degradation Reaction Determined Post Accelerated Weathering of Polyolefin Plastic Waste Blends

(2019) S.M. Al-Salem et al.   International Journal of Environmental Research and Public Health

Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC)

(2019) S.M. Al-Salem   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Characterization of pyrolysis products of high-ash excavated-waste and its char gasification reactivity and kinetics under a steam atmosphere

(2019) Ilman Nuran Zaini et al.   WASTE MANAGEMENT

Degradation of excavated polyethylene and polypropylene waste from landfill

(2019) Luisa Canopoli et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Production of value-added liquid fuel via microwave co-pyrolysis of used frying oil and plastic waste

(2018) Wan Adibah Wan Mahari et al.   ENERGY

Multi-variable regression analysis for the solid waste generation in the State of Kuwait

(2018) S.M. Al-Salem et al.   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Influential parameters on natural weathering under harsh climatic conditions of mechanically recycled plastic film specimens

(2018) S.M. Al-Salem   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Paradigms on landfill mining: From dump site scavenging to ecosystem services revitalization

(2017) Juris Burlakovs et al.   RESOURCES CONSERVATION AND RECYCLING

Landfill Mining - Wet mechanical treatment of fine MSW with a wet jigger

(2017) Sebastian Wanka et al.   WASTE MANAGEMENT

Plastics to fuel: a review

(2016) Bidhya Kunwar et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Implementation of a multi-variable regression analysis in the assessment of the generation rate and composition of hospital solid waste for the design of a sustainable management system in developing countries

(2016) Issam A Al-Khatib et al.   WASTE MANAGEMENT & RESEARCH

Investigating the effect of accelerated weathering on the mechanical and physical properties of high content plastic solid waste (PSW) blends with virgin linear low density polyethylene (LLDPE)

(2015) S.M. Al-Salem et al.   POLYMER TESTING

Characteristics and the recovery potential of plastic wastes obtained from landfill mining

(2014) Chuanbin Zhou et al.   JOURNAL OF CLEANER PRODUCTION

Case study on sampling, processing and characterization of landfilled municipal solid waste in the view of landfill mining

(2013) Tommi Kaartinen et al.   JOURNAL OF CLEANER PRODUCTION

Physicochemical properties of bio-oil and biochar produced by fast pyrolysis of stored single-pass corn stover and cobs

(2012) Ajay Shah et al.   BIORESOURCE TECHNOLOGY

Characterization of landfilled materials: screening of the enhanced landfill mining potential

(2012) Mieke Quaghebeur et al.   JOURNAL OF CLEANER PRODUCTION

Enhanced Landfill Mining in view of multiple resource recovery: a critical review

(2012) Peter Tom Jones et al.   JOURNAL OF CLEANER PRODUCTION

Washing of waste prior to landfilling

(2012) Raffaello Cossu et al.   WASTE MANAGEMENT

A review on tertiary recycling of high-density polyethylene to fuel

(2011) Sachin Kumar et al.   RESOURCES CONSERVATION AND RECYCLING

Landfill mining: A critical review of two decades of research

(2011) Joakim Krook et al.   WASTE MANAGEMENT

Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste

(2011) A. Adrados et al.   WASTE MANAGEMENT

Solid waste characterization, quantification and management practices in developing countries. A case study: Nablus district – Palestine

(2010) Issam A. Al-Khatib et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Kinetics and product distribution of end of life tyres (ELTs) pyrolysis: A novel approach in polyisoprene and SBR thermal cracking

(2009) S.M. Al-Salem et al.   JOURNAL OF HAZARDOUS MATERIALS

Recycling and recovery routes of plastic solid waste (PSW): A review

(2009) S.M. Al-Salem et al.   WASTE MANAGEMENT

Investigation of various polymeric materials for set-point temperature calibration in pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS)

(2008) L.M. Lund et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS