Adsorption film with sub-milli-interface morphologies via direct ink writing for indoor formaldehyde removal

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

(2021) Shane Lawson et al.   CHEMICAL REVIEWS

Experimental and modeling investigations on the adsorption behaviors of indoor volatile organic compounds in an in-situ thermally regenerated adsorption-board module

(2021) Qiwei Chen et al.   BUILDING AND ENVIRONMENT

Photocatalytic degradation of surface-coated tourmaline-titanium dioxide for self-cleaning of formaldehyde emitted from furniture

(2021) Xiangjie Wang et al.   JOURNAL OF HAZARDOUS MATERIALS

Very low concentration adsorption isotherms of trichloroethylene on common building materials

(2020) Shuai Xie et al.   BUILDING AND ENVIRONMENT

The effects of cell density and intrinsic porosity on structural properties and adsorption kinetics in 3D-printed zeolite monoliths

(2020) Shane Lawson et al.   CHEMICAL ENGINEERING SCIENCE

Field study on the improvement of indoor air quality with toluene adsorption finishing materials in an urban residential apartment

(2020) Jisoo Jeon et al.   ENVIRONMENTAL POLLUTION

Mathematical model for characterizing the full process of volatile organic compound emissions from paint film coating on porous substrates

(2020) Xiaojun Zhou et al.   BUILDING AND ENVIRONMENT

Predicting the emission characteristics of VOCs in a simulated vehicle cabin environment based on small-scale chamber tests: Parameter determination and validation

(2020) Haimei Wang et al.   ENVIRONMENT INTERNATIONAL

Gel–Print–Grow: A New Way of 3D Printing Metal–Organic Frameworks

(2020) Shane Lawson et al.   ACS Applied Materials & Interfaces

Multiscale investigation of adsorption properties of novel 3D printed UTSA-16 structures

(2020) Carlos A. Grande et al.   CHEMICAL ENGINEERING JOURNAL

Vertical macro-channel modification of a flexible adsorption board with in-situ thermal regeneration for indoor gas purification to increase effective adsorption capacity

(2020) Qiwei Chen et al.   ENVIRONMENTAL RESEARCH

Gaseous formaldehyde removal: A laminated plate fabricated with activated carbon, polyimide, and copper foil with adjustable surface temperature and capable of in situ thermal regeneration

(2019) Hongyin Chen et al.   INDOOR AIR

Improved asymmetrical honeycomb monolith catalyst prepared using a 3D printed template

(2019) Arantxa Davó-Quiñonero et al.   JOURNAL OF HAZARDOUS MATERIALS

Outdoor formaldehyde matters and substantially impacts indoor formaldehyde concentrations

(2019) Cong Liu et al.   BUILDING AND ENVIRONMENT

Toxic volatile organic compounds in 20 homes in Shanghai: Concentrations, inhalation health risks, and the impacts of household air cleaning

(2019) Lin Fang et al.   BUILDING AND ENVIRONMENT

Three-Dimensional Printing of Hierarchical Porous Architectures

(2019) Jen-Yu Huang et al.   CHEMISTRY OF MATERIALS

Development of 3D-Printed Polymer-MOF Monoliths for CO2 Adsorption

(2019) Shane Lawson et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Au sensitized La–CeO2 catalyst coated ceramics monoliths for toluene catalysis application

(2019) Pramila Patil et al.   MATERIALS CHEMISTRY AND PHYSICS

UTSA-16 Growth within 3D-Printed Co-Kaolin Monoliths with High Selectivity for CO2/CH4, CO2/N2, and CO2/H2 Separation

(2018) Shane Lawson et al.   ACS Applied Materials & Interfaces

Development of 3D-printed polymer-zeolite composite monoliths for gas separation

(2018) Harshul Thakkar et al.   CHEMICAL ENGINEERING JOURNAL

High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing

(2018) Keqiang Zhang et al.   CERAMICS INTERNATIONAL

Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing

(2018) Cheng Zhu et al.   Science Advances

Seeking the most powerful and practical real-world sorbents for gaseous benzene as a representative volatile organic compound based on performance metrics

(2018) Jan E. Szulejko et al.   SEPARATION AND PURIFICATION TECHNOLOGY

An in-situ thermally regenerated air purifier for indoor formaldehyde removal

(2017) R. Xiao et al.   INDOOR AIR

Adsorption of VOCs onto engineered carbon materials: A review

(2017) Xueyang Zhang et al.   JOURNAL OF HAZARDOUS MATERIALS

Development of manganese ferrite/graphene oxide nanocomposites for magnetorheological fluid with enhanced sedimentation stability

(2017) Guangshuo Wang et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Indoor air pollutants, ventilation rate determinants and potential control strategies in Chinese dwellings: A literature review

(2017) Wei Ye et al.   SCIENCE OF THE TOTAL ENVIRONMENT

3D Printing of Hierarchical Silk Fibroin Structures

(2016) Marianne R. Sommer et al.   ACS Applied Materials & Interfaces

Evaluation of modified used engine oil acting as a dispersant for concentrated coal–water slurry

(2016) Kang Zhang et al.   FUEL

Formaldehyde and acetaldehyde exposure and risk characterization in California early childhood education environments

(2016) A. Bradman et al.   INDOOR AIR

Enhanced adsorption of benzene vapor on granular activated carbon under humid conditions due to shifts in hydrophobicity and total micropore volume

(2016) Han-Bing Liu et al.   JOURNAL OF HAZARDOUS MATERIALS

The effect of different dispersants on the physical properties of nano CoAl2O4 ceramic ink-jet ink

(2015) Masoud Peymannia et al.   CERAMICS INTERNATIONAL

Intrinsic catalytic properties of extruded clay honeycomb monolith toward complete oxidation of air pollutants

(2015) Mhamed Assebban et al.   JOURNAL OF HAZARDOUS MATERIALS

A review of indoor air treatment technologies

(2015) Angela Luengas et al.   REVIEWS IN ENVIRONMENTAL SCIENCE AND BIO-TECHNOLOGY

A review of indoor air treatment technologies

(2015) Angela Luengas et al.   REVIEWS IN ENVIRONMENTAL SCIENCE AND BIO-TECHNOLOGY

VOCs removal by adsorption onto activated carbons from biocollagenic wastes of vegetable tanning

(2014) R.R. Gil et al.   CHEMICAL ENGINEERING JOURNAL

Risk assessment of population inhalation exposure to volatile organic compounds and carbonyls in urban China

(2014) Zhengjian Du et al.   ENVIRONMENT INTERNATIONAL

Formaldehyde in the Ambient Atmosphere: From an Indoor Pollutant to an Outdoor Pollutant?

(2013) Tunga Salthammer   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

The efficacy of GAC/MgO composite for destructive adsorption of benzene from waste air stream

(2013) Gholamreza Moussavi et al.   CHEMICAL ENGINEERING JOURNAL

Zeolite monoliths with hierarchical designed pore network structure: Synthesis and performance

(2013) Fatin A. Hasan et al.   CHEMICAL ENGINEERING JOURNAL

Formaldehyde in residences: long-term indoor concentrations and influencing factors

(2010) D. E. Hun et al.   INDOOR AIR

Comparison of Traditional and Structured Adsorbents for CO2Separation by Vacuum-Swing Adsorption

(2010) Fateme Rezaei et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Structured adsorbents in gas separation processes

(2009) F. Rezaei et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Doping and de-doping of carbon nanotube transparent conducting films by dispersant and chemical treatment

(2008) Hong-Zhang Geng et al.   JOURNAL OF MATERIALS CHEMISTRY

Adsorption–desorption operations of multilayer desiccant packed bed for dehumidification applications

(2008) A.E. Kabeel   RENEWABLE ENERGY