Strengthening contributions of dislocations and twins in warm-rolled TWIP steels

Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy

(2021) Zhufeng He et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling

(2021) Marina Abramova et al.   Metals

Study of dislocation-twin boundary interaction mechanisms in plastic deformation of TWIP steel by discrete dislocation dynamics and dislocation density-based modeling

(2021) Xiangru Guo et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Crystal plasticity finite element analysis of gradient nanostructured TWIP steel

(2020) Xiaochong Lu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Short-range order and its impact on the CrCoNi medium-entropy alloy

(2020) Ruopeng Zhang et al.   NATURE

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

(2020) Huihui Zhi et al.   ACTA MATERIALIA

A crucial impact of short-range ordering on the cyclic deformation and damage behavior of face-centered cubic alloys: A case study on Cu-Mn alloys

(2020) D. Han et al.   ACTA MATERIALIA

Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures

(2019) Z.F. He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures

(2019) M.N. Hasan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Mechanical twinning and texture evolution during asymmetric warm rolling of a high manganese steel

(2019) Frederike Brasche et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature

(2019) A. K. Chandan et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The role of interstitial carbon atoms on the strain-hardening rate of twinning-induced plasticity steels

(2019) Z.C. Luo et al.   SCRIPTA MATERIALIA

A unique two-stage strength-ductility match in low solid-solution hardening Ni-Cr alloys: Decisive role of short range ordering

(2019) Y.J. Zhang et al.   SCRIPTA MATERIALIA

Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties

(2018) Yu Li et al.   ACTA MATERIALIA

Twinning-induced plasticity (TWIP) steels

(2018) Bruno C. De Cooman et al.   ACTA MATERIALIA

Temperature dependent strain hardening and fracture behavior of TWIP steel

(2018) Manjunatha Madivala et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A novel way to enhance the strength of twinning induced plasticity (TWIP) steels

(2018) Rajib Kalsar et al.   SCRIPTA MATERIALIA

Revisit the role of deformation twins on the work-hardening behaviour of twinning-induced plasticity steels

(2018) Z.C. Luo et al.   SCRIPTA MATERIALIA

Effects of the grain size and shape on the flow stress: A dislocation dynamics study

(2018) Maoyuan Jiang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strain Rate Dependent Mechanical Properties of TWIP Steel

(2018) Manjunatha Madivala et al.   JOM

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

(2018) Yanchun Dong et al.   Metals

Investigation of ductile damage during surface mechanical attrition treatment for TWIP steels using a dislocation density based viscoplasticity and damage models

(2018) Zhenglin Chen et al.   MECHANICS OF MATERIALS

A mathematical prediction model to establish the role of stacking fault energy on the cryo-deformation behavior of FCC materials at different strain levels

(2017) B. Srinivas et al.   INTERNATIONAL JOURNAL OF PLASTICITY

On strain hardening mechanism in gradient nanostructures

(2017) Jianjun Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility

(2017) Y.Z. Tian et al.   MATERIALS CHARACTERIZATION

On the effect of chemical composition on yield strength of TWIP steels

(2017) Pavel Kusakin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A good strength-ductility match in Cu-Mn alloys with high stacking fault energies: Determinant effect of short range ordering

(2017) D. Han et al.   SCRIPTA MATERIALIA

A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: Importance of slip mode

(2016) C.W. Shao et al.   ACTA MATERIALIA

Evolution of dislocations and twins in a strong and ductile nanotwinned steel

(2016) P. Zhou et al.   ACTA MATERIALIA

Microstructural evolution and phase transformation in twinning-induced plasticity steel induced by high-pressure torsion

(2016) X.H. An et al.   ACTA MATERIALIA

A crystal plasticity modeling considering volume fraction of deformation twinning

(2016) Yuichi Tadano et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Tensile deformation behavior analysis of low density Fe–18Mn–10Al– x C steels

(2016) Hua Ding et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The respective hardening contributions of dislocations and twins to the flow stress of a twinning-induced plasticity steel

(2016) Z.Y. Liang et al.   SCRIPTA MATERIALIA

The effect of grain size on the twin initiation stress in a TWIP steel

(2015) K.M. Rahman et al.   ACTA MATERIALIA

Design of a twinning-induced plasticity high entropy alloy

(2015) Y. Deng et al.   ACTA MATERIALIA

Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel

(2015) Z.Y. Liang et al.   ACTA MATERIALIA

Atomic short-range order and incipient long-range order in high-entropy alloys

(2015) Prashant Singh et al.   PHYSICAL REVIEW B

Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper

(2015) N. Lu et al.   Nature Communications

Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel

(2014) Christian Haase et al.   ACTA MATERIALIA

The effects of Si on the mechanical twinning and strain hardening of Fe–18Mn–0.6C twinning-induced plasticity steel

(2013) Kookhyun Jeong et al.   ACTA MATERIALIA

Temperature dependence of the flow stress of Fe–18Mn–0.6C–xAl twinning-induced plasticity steel

(2013) Il-Chan Jung et al.   ACTA MATERIALIA

Application of a Dislocation Density-Based Constitutive Model to Al-Alloyed TWIP Steel

(2013) Jinkyung Kim et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Comparison of work hardening and deformation twinning evolution in Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steels

(2013) H.K. Yang et al.   SCRIPTA MATERIALIA

On the relationship between work hardening and twinning rate in TWIP steels

(2012) K. Renard et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel

(2012) Hung-Wei Yen et al.   SCRIPTA MATERIALIA

Grain size effect on strain hardening in twinning-induced plasticity steels

(2012) I. Gutierrez-Urrutia et al.   SCRIPTA MATERIALIA

Tensile deformation of low-density Fe–Mn–Al–C austenitic steels at ambient temperature

(2012) Kyung-Tae Park   SCRIPTA MATERIALIA

Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging

(2011) I. Gutierrez-Urrutia et al.   ACTA MATERIALIA

Hydrogen embrittlement in a Fe–Mn–C ternary twinning-induced plasticity steel

(2011) Motomichi Koyama et al.   CORROSION SCIENCE

High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships

(2011) O. Bouaziz et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Precipitation strengthening in high manganese austenitic TWIP steels

(2011) Colin Scott et al.   International Journal of Materials Research

Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper

(2011) T. H. Fang et al.   SCIENCE

Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate

(2010) S. Curtze et al.   ACTA MATERIALIA

Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests

(2010) I. Gutierrez-Urrutia et al.   JOURNAL OF MATERIALS SCIENCE

Tensile deformation behavior of high manganese austenitic steel: The role of grain size

(2010) G. Dini et al.   MATERIALS & DESIGN

Flow stress analysis of TWIP steel via the XRD measurement of dislocation density

(2010) G. Dini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Neutron study of the short range order inversion inFe1−xCrx

(2010) I. Mirebeau et al.   PHYSICAL REVIEW B

Revealing the Maximum Strength in Nanotwinned Copper

(2009) L. Lu et al.   SCIENCE

An alternative model for the strain hardening of FCC alloys that twin, validated for twinning-induced plasticity steel

(2008) J GILSEVILLANO   SCRIPTA MATERIALIA

Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels

(2007) O. Bouaziz et al.   SCRIPTA MATERIALIA