Simulation study on in-cylinder combustion and pollutant generation characteristics of PODE/methanol blends

A synthetic skeletal mechanism for combustion simulation of acetone-n-butanol-ethanol mixture and its components in diesel engines

(2021) Yuqiang. Li et al.   FUEL

Experimental and numerical study on flow, combustion and emission characteristics of CI engine fueled with n-butanol/diesel blends under post-injection strategy

(2021) Mingzhang Pan et al.   FUEL

The regulated emissions and PAH emissions of bio-based long-chain ethers in a diesel engine

(2021) Shiliang Wu et al.   FUEL PROCESSING TECHNOLOGY

The combustion, performance and emissions investigation of a dual-fuel diesel engine using silicon dioxide nanoparticle additives to methanol

(2021) Jiangjun Wei et al.   ENERGY

An experimental study of engine characteristics and tailpipe emissions from modern DI diesel engine fuelled with methanol/diesel blends

(2021) Ahmad O. Hasan et al.   FUEL PROCESSING TECHNOLOGY

Multiple combustion modes existing in the engine operating in diesel methanol dual fuel

(2021) Baodong Ma et al.   ENERGY

Improving the combustion process by determining the optimum percentage of liquefied petroleum gas (LPG) via response surface methodology (RSM) in a spark ignition (SI) engine running on gasoline-LPG blends

(2021) Suleyman Simsek et al.   FUEL PROCESSING TECHNOLOGY

Optimize the co-solvent for methanol in diesel with group of oxygen-containing reagents: Molecular structure and intermolecular forces analysis

(2021) Zixiang Gao et al.   FUEL PROCESSING TECHNOLOGY

Preparation and performance improvement of methanol and palm oil/palm kernel oil blended fuel

(2021) Chao Jin et al.   FUEL PROCESSING TECHNOLOGY

Experimental study on spray characteristics, combustion stability, and emission performance of a CRDI diesel engine operated with biodiesel–ethanol blends

(2021) Limin Geng et al.   Energy Reports

Overview of polyoxymethylene dimethyl ether additive as an eco-friendly fuel for an internal combustion engine: Current application and environmental impacts

(2020) Omar I. Awad et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Optical study on spray combustion characteristics of PODE/diesel blends in different ambient conditions

(2020) Yue Ma et al.   FUEL

Influence of injection parameters on combustion, gaseous emissions and particle size distribution of a CRDI diesel engine operating with PODE/diesel blends

(2020) Tianting Wang et al.   FUEL

Applicability of aromatic selection towards newer formulated fuels for regulated and unregulated emissions reduction in CI engine

(2020) Paramvir Singh et al.   FUEL PROCESSING TECHNOLOGY

Effects of PODE/diesel blends on particulate matter emission and particle oxidation characteristics of a common-rail diesel engine

(2020) Junheng Liu et al.   FUEL PROCESSING TECHNOLOGY

Effects of direct-injection fuel types and proportion on late-injection reactivity controlled compression ignition

(2019) Qinglong Tang et al.   COMBUSTION AND FLAME

The applicability of catalytic esterified biomass-pyrolysis-oil surrogates in diesel engine

(2019) Shiliang Wu et al.   FUEL PROCESSING TECHNOLOGY

Progress of acetone-butanol-ethanol (ABE) as biofuel in gasoline and diesel engine: A review

(2019) Ibham Veza et al.   FUEL PROCESSING TECHNOLOGY

Is it really the end of internal combustion engines and petroleum in transport?

(2018) Gautam Kalghatgi   APPLIED ENERGY

To extend the operating range of high MSP with ultra-low emissions for DMDF unit pump engine

(2018) Bin Wang et al.   FUEL

Methanol as a fuel for internal combustion engines

(2018) Sebastian Verhelst et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

The effect of the alcohol content in the fuel mixture on the performance and emissions of a direct injection diesel engine fueled with diesel-methanol and diesel-ethanol blends

(2017) Arkadiusz Jamrozik   ENERGY CONVERSION AND MANAGEMENT

Combustion and emission characteristics of DI diesel engine fuelled by ethanol injected into the exhaust manifold

(2017) Mohamed Nour et al.   FUEL PROCESSING TECHNOLOGY

Physico-chemical properties and fuel characteristics of oxymethylene dialkyl ethers

(2016) Ludger Lautenschütz et al.   FUEL

An experimental study on combustion, engine performance and exhaust emissions in a HCCI engine fuelled with diethyl ether–ethanol fuel blends

(2016) Seyfi Polat   FUEL PROCESSING TECHNOLOGY

Effects of diesel injection pressure on the performance and emissions of a HD common-rail diesel engine fueled with diesel/methanol dual fuel

(2015) Junheng Liu et al.   FUEL

Combustion and emission characteristics of a turbocharged diesel engine using high premixed ratio of methanol and diesel fuel

(2015) Lijiang Wei et al.   FUEL

The impact of intake air temperature on performance and exhaust emissions of a diesel methanol dual fuel engine

(2015) Wang Pan et al.   FUEL

An overview of methanol as an internal combustion engine fuel

(2015) Xudong Zhen et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Effects of pilot injection pressure on the combustion and emissions characteristics in a diesel engine using biodiesel–CNG dual fuel

(2013) Kyunghyun Ryu   ENERGY CONVERSION AND MANAGEMENT

Effects of intake air preheat and fuel blend ratio on a diesel engine operating on biodiesel–methanol blends

(2011) Nadir Yilmaz   FUEL

The influence of operating parameters on the performance and emissions of a DI diesel engine using methanol-blended-diesel fuel

(2009) Cenk Sayin et al.   FUEL

Experimental investigation on regulated and unregulated emissions of a diesel/methanol compound combustion engine with and without diesel oxidation catalyst

(2009) Z.H. Zhang et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Effect of Diesel/methanol compound combustion on Diesel engine combustion and emissions

(2008) Chunde Yao et al.   ENERGY CONVERSION AND MANAGEMENT