Rheology control towards 3D printed magnesium potassium phosphate cement composites
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Rheology control towards 3D printed magnesium potassium phosphate cement composites
Authors
Keywords
Structural build-up, Magnesium potassium phosphate cement, 3D printing, Viscosity, Static yield stress
Journal
COMPOSITES PART B-ENGINEERING
Volume 239, Issue -, Pages 109963
Publisher
Elsevier BV
Online
2022-05-11
DOI
10.1016/j.compositesb.2022.109963
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effect of sulphoaluminate cement on fresh and hardened properties of 3D printing foamed concrete
- (2022) Chao Liu et al. COMPOSITES PART B-ENGINEERING
- Development and characterization of magnesium phosphate cement based ultra-high performance concrete
- (2022) Jihui Qin et al. COMPOSITES PART B-ENGINEERING
- Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber
- (2021) Junhong Ye et al. COMPOSITES PART B-ENGINEERING
- Rheological behaviors and structure build-up of 3D printed polypropylene and polyvinyl alcohol fiber-reinforced calcium sulphoaluminate cement composites
- (2021) Mingxu Chen et al. Journal of Materials Research and Technology-JMR&T
- Effect of temperature curing on properties and hydration of wollastonite blended magnesium potassium phosphate cements
- (2021) Biwan Xu et al. CEMENT AND CONCRETE RESEARCH
- Mix design and rheological properties of magnesium potassium phosphate cement composites based on the 3D printing extrusion system
- (2021) Zhihui Zhao et al. CONSTRUCTION AND BUILDING MATERIALS
- Sustainable materials for 3D concrete printing
- (2021) Shantanu Bhattacherjee et al. CEMENT & CONCRETE COMPOSITES
- Possibilities and challenges of constant shear rate test for evaluation of structural build-up rate of cementitious materials
- (2020) I. Ivanova et al. CEMENT AND CONCRETE RESEARCH
- Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
- (2020) Mingxu Chen et al. COMPOSITES PART B-ENGINEERING
- Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing
- (2020) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Setting on demand for digital concrete – Principles, measurements, chemistry, validation
- (2020) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
- (2020) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
- (2019) Yu Chen et al. Materials
- Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent
- (2019) Bing Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of magnesium-to-phosphate ratio and water-to-cement ratio on hydration and properties of magnesium potassium phosphate cements
- (2019) Biwan Xu et al. CEMENT AND CONCRETE RESEARCH
- Digital Concrete: A Review
- (2019) Timothy Wangler et al. CEMENT AND CONCRETE RESEARCH
- 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
- (2019) Jacques Kruger et al. COMPOSITES PART B-ENGINEERING
- Utilizing mixed-mineralogy ferroan magnesite tailings as the source of magnesium oxide in magnesium potassium phosphate cement
- (2019) Arnold Ismailov et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
- (2019) Wu-Jian Long et al. JOURNAL OF CLEANER PRODUCTION
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)
- (2018) Ye Qian et al. CEMENT AND CONCRETE RESEARCH
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Effect of mineral admixtures on the structural build-up of cement paste
- (2018) Qiang Yuan et al. CONSTRUCTION AND BUILDING MATERIALS
- Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of silica fume and basalt fiber on the mechanical properties and microstructure of magnesium phosphate cement (MPC) mortar
- (2018) Muhammad Riaz Ahmad et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
- (2018) Biranchi Panda et al. MATERIALS LETTERS
- Use of microwave oven in the calcination of MgO and effect on the properties of magnesium phosphate cement
- (2018) D.V. Ribeiro et al. CONSTRUCTION AND BUILDING MATERIALS
- Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
- (2018) Zhixin Liu et al. CONSTRUCTION AND BUILDING MATERIALS
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- A comprehensive study of basalt fiber reinforced magnesium phosphate cement incorporating ultrafine fly ash
- (2018) Muhammad Riaz Ahmad et al. COMPOSITES PART B-ENGINEERING
- Potential to design magnesium potassium phosphate cement paste based on an optimal magnesia-to-phosphate ratio
- (2017) Hongyan Ma et al. MATERIALS & DESIGN
- Effects of graphene oxide on the properties and microstructures of the magnesium potassium phosphate cement paste
- (2016) Zeyu Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental research on magnesium phosphate cements containing alumina
- (2016) Ning Liu et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio
- (2015) Biwan Xu et al. CEMENT AND CONCRETE RESEARCH
- Magnesium potassium phosphate cement paste: Degree of reaction, porosity and pore structure
- (2014) Hongyan Ma et al. CEMENT AND CONCRETE RESEARCH
- Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes
- (2014) Zhuojun Quanji et al. CONSTRUCTION AND BUILDING MATERIALS
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Thixotropy
- (2008) Jan Mewis et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now