Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber
Authors
Keywords
3D concrete printing, Ultra-high ductile concrete, Crumb rubber, Fresh properties, Mechanical anisotropy
Journal
COMPOSITES PART B-ENGINEERING
Volume -, Issue -, Pages 108639
Publisher
Elsevier BV
Online
2021-01-22
DOI
10.1016/j.compositesb.2021.108639
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
- (2020) Mingxu Chen et al. COMPOSITES PART B-ENGINEERING
- Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions
- (2020) Zhijian Li et al. COMPOSITES PART B-ENGINEERING
- Experimental study on the size effect of ultra-high ductile cementitious composites
- (2020) Jiangtao Yu et al. CONSTRUCTION AND BUILDING MATERIALS
- On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
- (2020) Victor C. Li et al. CEMENT AND CONCRETE RESEARCH
- Paving an engineered cementitious composite (ECC) overlay on concrete airfield pavement for reflective cracking resistance
- (2020) Hui Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Aggregate-bed 3D concrete printing with cement paste binder
- (2020) Shiwei Yu et al. CEMENT AND CONCRETE RESEARCH
- Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
- (2020) Arun R. Arunothayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Using Green Supplementary Materials to Achieve More Ductile ECC
- (2019) Yichao Wang et al. Materials
- Rheological and harden properties of the high-thixotropy 3D printing concrete
- (2019) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
- (2019) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa
- (2019) Linzhi Li et al. CEMENT & CONCRETE COMPOSITES
- Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
- (2019) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
- (2019) Taylor Marchment et al. MATERIALS & DESIGN
- Matrix design of light weight, high strength, high ductility ECC
- (2019) Zhigang Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Digital Concrete: A Review
- (2019) Timothy Wangler et al. CEMENT AND CONCRETE RESEARCH
- Multiple-scale investigations on self-healing induced mechanical property recovery of ECC
- (2019) Zhigang Zhang et al. CEMENT & CONCRETE COMPOSITES
- Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: Mechanical properties
- (2019) Yading Xu et al. COMPOSITES PART B-ENGINEERING
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Reinforced high-strength engineered cementitious composite (ECC) columns under eccentric compression: Experiment and theoretical model
- (2019) Ling-Zhi Li et al. ENGINEERING STRUCTURES
- Direct Tensile Properties and Stress–Strain Model of UHP-ECC
- (2019) Ke-Quan Yu et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- A self-reinforced cementitious composite for building-scale 3D printing
- (2018) Daniel G. Soltan et al. CEMENT & CONCRETE COMPOSITES
- Nacre-inspired composite design approaches for large-scale cementitious members and structures
- (2018) Daniel G. Soltan et al. CEMENT & CONCRETE COMPOSITES
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPa
- (2018) Yao Ding et al. COMPOSITE STRUCTURES
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Direct tensile properties of engineered cementitious composites: A review
- (2018) Kequan Yu et al. CONSTRUCTION AND BUILDING MATERIALS
- Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers
- (2018) Ke-Quan Yu et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar
- (2018) Kequan Yu et al. ENGINEERING STRUCTURES
- Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing
- (2018) Hiroki Ogura et al. Materials
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- Effect of Polypropylene Fibre Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
- (2018) Behzad Nematollahi et al. Materials
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders
- (2016) C. Gosselin et al. MATERIALS & DESIGN
- Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures
- (2015) Jiangtao Yu et al. CONSTRUCTION AND BUILDING MATERIALS
- Bioinspired structural materials
- (2014) Ulrike G. K. Wegst et al. NATURE MATERIALS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started